ya ud3p and ud3r are same in terms of design and layout.but my casing is cm690,wonder wheter it will fit

This post has been edited by ZeneticX: Jun 2 2009, 04:26 PM

try stressing it with a better program like LinX or IBT

u need to stress prime95 for almost 1 day to really test for full stability.thts why i prefer LinX or IBT more

memory to use just select all,problem size is changed according to ur memory used,no need to touch tht.and select stop upon error

this mobo should do fine on 500fsb or more,prob is the voltage oni

i oni noe vcore is for proc,mch core is for north bridge,and dram is for ram lol.others nid pro to explain

whatever it is.....just take note of the vcore and mch core.higher vcore or higher fsb requires higher mch core.as for vcore ref and mch ref,set those to auto.cpu pll set it to normal,termination set to auto

CoreTemp is for monitoring proc temp oni la.

anyway wch5274 try everest


btw is motherboard temp shown in everest same as NB temp?if its same....mine is at 46c

This post has been edited by ZeneticX: Jun 4 2009, 12:09 AM

u can google for *ahem *ahem*

take ur manual book,there's a block diagram explaining the roles of each part on the mobo

yea.this mobo works even more like a charm in ocing quadies

CCF cant fit UD3P,UD3R unfortunately

yea can fit UD3L i think.since UD3L dunhav those huge mobo heatsinks

not sure bout ccf 92mm eh

wut? mind sharing a screenie or ur bios setting?

hmm he is using am2 mount clip and am2 bracket on p45 mobo?

cant really understand he's explanation

hyper x is not really tht good in oc,infact its 1 of the worst

actually it depends on the chip of the ram itself.if the chip is nice,even value rams can overclock well.but heat is a issue .i let other sifu to recommend

anyway im using corsair dominator

much better than the included push pin bracket

yea.nd to take out mobo and stick the mounting to the back

hmmm.maybe not but in long term maybe will bend ur mobo a bit or harm ur mobo,bcoz of the weight of the hsf.

i dun really like pushpins,since the nightmare i have with my intel stock cooler,so i straight purchase the crossbow kit with my archilles.bolth thru kits are better

i also have to take out my mobo for the installation,but really feel worth it after tht

lol.tht time i can secure 3 push pin in,but left 1 cant push in,try hard till mobo wanna bend like dat oso cant.so fed up and live with it.made my proc temp rise up to 90c+ bcoz of tht .nightmare end till i bought my archilles + crossbow

ccf cant really fit if u hav ud3p or ud3r,some mods or extra steps need to be done

btw they say s1283 dark knight is better,the fan is 89cfm

u can pm lingloong for crossbow kit,there's few models for different hsf

This post has been edited by ZeneticX: Jul 7 2009, 09:40 PM

yea i noe.but put it tht way will also sort of decrease its overall performance,since its sucking air from the bottom,and thts where the gc is located