Can you please post the photo of the 24mm holes. I can't find it. Thanks
Added on March 10, 2009, 8:54 pmQUOTE(Enigma4646 @ Mar 8 2009, 02:23 PM)
dont touch our std wiring
I did not touch the wiring, just put a sensor on the radiator hose.
Added on March 10, 2009, 8:57 pmQUOTE(jibsifly @ Mar 8 2009, 10:32 PM)
i stucked once in traffic jam that last for bout an hour but no prob,the indication light maintain green at all tym.about the road tax can we claim for the rebate??
Maybe my fan speed is not spinning fast enough. there is two fan in front. right hand is moving when you on the aircon, left side is when temperature hit about 95deg C
Added on March 10, 2009, 9:22 pmQUOTE(smliu @ Mar 10 2009, 03:32 PM)
Very good information, Dynasan. Thanks. I checked thru' my car immediately and found that the customized mat did not obstruct the accelerator movement but the original carpet does. No wonder there is limited movement for the accelerator. I used my foot to step on it (the carpet below the accelerator) and seems working.
Thank you for sharing, Dynasan, at least there is some improvement done.

Added on March 10, 2009, 7:48 pmOh no! While I try ways to insulate my car, I found something not fixed at the bottom of the car. There are four holes on each side underneath the chassis. Use your hand to touch the bottom from front door frame to back door frame, you will find 4 holes of 24mm diameter each. These holes need to be cover or else water will go into the car. I can't wait to go to SC to fix this, I will buy the rubber cover to cover them as soon as possible. These holes not only allow water to pass through but the tyres/road noise will come into the car also. These holes also collect dust and mud in time to come.
So guys, take action immediately either do it yourself, ask foreman to do it or go to SC to fix it. Not only to prevent water, mud, dust go into the car, I am sure the car will be quiter after the cover is put on.
Just check my car ,confirm that the holes are plug in.
This post has been edited by gagage: Mar 10 2009, 09:22 PM