QUOTE(Enigma4646 @ Apr 6 2009, 07:11 PM)
errrr it depends on your tyres also esp ...for those who using 2nd hand tyres.....uneven tyre surface also have an impact.....smliu sure warranty void ka ????? why impact on absorbers ....care to explain ???
camber screw are for adjusting the camber position of the car either toe in or toe out ....why relates to absorber ???
Camber
Camber is the lean of the wheel. If the top of the wheel tilted away from the car, that is called positive camber. If the top of the wheel is tilted in towards the car, that is called negative camber. Camber can cause a pull to one side or the other depending on the direction of the lean. The car will pull in the direction of the wheel with the most positive camber. However, if both sides have the same amount of negative or positive camber, they will cancel each other out and the car will not pull. Camber can cause premature tire wear, but is not as hard on tires as toe is."
Added on April 6, 2009, 7:15 pm
and our rear wheels....I think no need....since its same with my last hyundai sonata .....even the camber screw...you can buy outside .....more cheaper...if you insist to use one la.....
Added on April 6, 2009, 7:20 pmanother interesting allignment stories....
Once the fixed the adjustable unit, they won't fixed back the original. Do u know why they recommend this adjustable nut?
Aligtment Charge usually Rm 18 for Spectra.
Then sure ur camber setting will run because of adjustable nut.
They charge u extra RM 8 for one side camber adjust.
another thing, if u never watch ur tyre wear and tear and u do aligtment as usual 20000Km once, then ur tyre will worn out easily.
This problem base on my terrible experience.
U go to the shop that i recommend and pls bring ur ori nut together and ask the shop and see the his answer. But sure he will give positive answer because he is the one who solve my Unc's Spectra allignment problem. That's y i recommend u go to the shop located at Butterworth.
Do worry, it should be ok.
Don't believe to the Alignment machine that they use. All cheating.
They normally use Taiwan Made alignment machine which can be programmed by a computer. If Programmable machine, what we program, the machine will do. So Donnu maybe they program it to make money.
Believe it, its true. I face this problem many many time.
That's y i won't give my car to unknown tyre shops.
do u know how much the cost of one adjustable nut?
its just RM 8 per nut.
But the tyre shop sell to us rm 35 per nut.
Guys..camber screw are for adjusting the camber position of the car either toe in or toe out ....why relates to absorber ???
Camber
Camber is the lean of the wheel. If the top of the wheel tilted away from the car, that is called positive camber. If the top of the wheel is tilted in towards the car, that is called negative camber. Camber can cause a pull to one side or the other depending on the direction of the lean. The car will pull in the direction of the wheel with the most positive camber. However, if both sides have the same amount of negative or positive camber, they will cancel each other out and the car will not pull. Camber can cause premature tire wear, but is not as hard on tires as toe is."
Added on April 6, 2009, 7:15 pm

and our rear wheels....I think no need....since its same with my last hyundai sonata .....even the camber screw...you can buy outside .....more cheaper...if you insist to use one la.....
Added on April 6, 2009, 7:20 pmanother interesting allignment stories....
Once the fixed the adjustable unit, they won't fixed back the original. Do u know why they recommend this adjustable nut?
Aligtment Charge usually Rm 18 for Spectra.
Then sure ur camber setting will run because of adjustable nut.
They charge u extra RM 8 for one side camber adjust.
another thing, if u never watch ur tyre wear and tear and u do aligtment as usual 20000Km once, then ur tyre will worn out easily.
This problem base on my terrible experience.
U go to the shop that i recommend and pls bring ur ori nut together and ask the shop and see the his answer. But sure he will give positive answer because he is the one who solve my Unc's Spectra allignment problem. That's y i recommend u go to the shop located at Butterworth.
Do worry, it should be ok.
Don't believe to the Alignment machine that they use. All cheating.
They normally use Taiwan Made alignment machine which can be programmed by a computer. If Programmable machine, what we program, the machine will do. So Donnu maybe they program it to make money.
Believe it, its true. I face this problem many many time.
That's y i won't give my car to unknown tyre shops.
do u know how much the cost of one adjustable nut?
its just RM 8 per nut.
But the tyre shop sell to us rm 35 per nut.
Thank you very much for all your info. really appreciate.
Thanks
Apr 7 2009, 02:07 AM

Quote
0.0902sec
0.43
6 queries
GZIP Disabled