AMD® Socket-AM2&AM2+ Overclocking V11, ~ The AMD Vibe is going STRONG ~
|
|
 Nov 4 2008, 04:23 AM
Return to original view | Post
#1
|
 
Senior Member
1,394 posts Joined: Aug 2006 From: Sungai Petani  
|
Gurus,
I have this X2 4800+ AM2 Brisbane and using ASUS M2A-VM mobo. I look at cpu-z and it show the speed varies..sometimes it 1800GHz, sometimes 2500GHz and so on. How can I make it fix at 1 value? Also, my ram should be 4-4-4-12 but then in cpuz, it show 5-5-5-18. (mushkin) Anyone can advise? |
|
|
|
|
|
Nov 5 2008, 02:44 AM
Return to original view | Post
#2
|
|
Senior Member
1,394 posts Joined: Aug 2006 From: Sungai Petani
|
QUOTE(-pWs- @ Nov 4 2008, 06:51 AM) 1. Disable Cool N Quiet in Bios The screenie of cpu-z:2. 4-4-4-12 should be EPP right? Please attach CPU-z SPD & Mem tab screenie here. -pWs-  http://www.clafy.com/image-280C_491097BE.jpg Advise appreciated. |
|
|
Nov 5 2008, 03:50 AM
Return to original view | Post
#3
|
|
Senior Member
1,394 posts Joined: Aug 2006 From: Sungai Petani
|
Also, my rig specs can be seen as in signature.
Anyone can suggest me how to get optimal performance using OC for the rig? |
|
|
Nov 5 2008, 06:40 PM
Return to original view | Post
#4
|
|
Senior Member
1,394 posts Joined: Aug 2006 From: Sungai Petani
|
QUOTE(-pWs- @ Nov 5 2008, 06:34 AM) Nothing wrong w the speed & timing. Your ram is rated to run at 800MHz 5-5-5-18 at 1.8v. DDR2 vDimm is 1.8v by default. If you want to overclock your ram, you might need to play w HTT. Then from there, the speed of ram will increase. Go and learn the ram timing and how to see the AM2/DDR Divider table for your processor. -pWs-  Can you show where is the best guides to learn this?And the table as well.. Sorry for too much asking, newb to all these.  |
|
|
Nov 8 2008, 12:35 PM
Return to original view | Post
#5
|
|
Senior Member
1,394 posts Joined: Aug 2006 From: Sungai Petani
|
Guys, need some advise.
Currently I have non-oc motherboard with 2 1xgb mushkin ddr2 800MHz installed. I am planning to add more ram. Which is better? 1- Buy 2x1gb same mushkin set to be total of 4GB onboard memory. 2- Sell the mushkin, buy 4x2GB value ram so total will be 8GB. 3- Buy 2x1GB value ram and mix it with existing mushin? Which will have better performance? Please note that I DID NOT overclock anything on my pc. |
|
Topic ClosedOptions
|
| Change to: |  0.0481sec
 0.73
 7 queries
 GZIP Disabled
Time is now: 12th December 2025 - 04:38 PM |
Quote