will OC my 6000+ 2moro(aft bzing my asgnmt)...

if cnt go far atleast go to 3.2GHz..mean use a +/-RM300 proc as a RM5xx proc..

y my core temp will increase whn i away for a long time. aft it turn into screen saver n standby mode, the temp sure will increase quite much 7-10degree

thn aft i disturb it wake up frm standby the temp will decrease to normal..

3800 F3 can OC kaw kaw..!!!

but i oso dunoe going where to get it..
nw seem no shop that hv 3800 in their price list..

ohh,, yalor, frm the result of OC, i notice that it was a most OC'able proc in AMD.. nw really tough to find a AMD proc that hv such OC potential..

aft i try my 6000+ score in 3DMark06, i realise that K10 really beter thn K8 quite much, or mayb the extra 1 core there at toliman..

toliman 8450 OCed to 2.5GHz can get beter result(10907) compare to 6000+ OCed to 3.2GHz(10827)

some body use 6000+ with stock HSF? hw ur core temp nomally ya?



my proc temp quite high at js normal speed..

nid change the HSF..?

oic..
yaya... thats y b4 ah_khoo got tell me b4 that 6000+ is not so temp frenly..

nw i understand it... but suck again...
my MB oni can push Vcore cnt decrease de..

edit:
@ah_khoo

the 5600+ @3GHz idle with wat temp ya? should be hv a beter temp due to 89w n lower Vcore..

This post has been edited by cdlim87: Oct 15 2008, 04:32 PM

6500 is edit frm phenom ist?
like wat had did for x3, locked 1 core frm x4
nw is locked 2 core..

yaya.. should be hv beter performence,, since it is k10 architecture..
for me i belive k10 will own k8 forever...

wow,........!!! all ppl plying 3800 F3...
thats was the most OCable AMD chip..

@anep

ur freezer64 pro nice or nt? hw ur temp ?

-deleted-

This post has been edited by cdlim87: Oct 16 2008, 11:14 PM

quite high oh.. bcos me oso thking to get a aft market CPU cooler,, 6000+ with tdp 125w, Vcore 1.4xx really quite high temp..

gona find a not so expensive cooler,n will fit to CM elite series casing.. mayb will get gemin II S...

really...?? sound interesting wor..
hw ur cpu temp using SD964? ?? can post some temp at idle n loaded?? thx..
if really work well thn mayb i can consider it oso..

ccf heatsink too big i thk.. cnt fit for CM elite series casing..
btw i thk price for xigmatec quite expensive ler.. cnt found cheap de...
Xigmatek HDT-SD964 js with 92mm fan ; CM hyper 212 with 120mm fan, i found that their price vy similiar.. js i thk elite series casing will not fit for CM hyper 212..

thats y im thking to get CM geminII S( RM119)..
xigmatek hdt-sd964 can get at this price or lower ar?

@ah_khoo

s1283 also quite big ler... this blow out or blow up with 120mm fan de i thk vy tough to fit in CM elite series de casing ar...if can fit mayb i can get CM hyper 212 (more buget, RM124)

@sharkeer

thx for the info..

yalo.. more suitable to put blow in(blow toward proc) type cooler oni..
i prefer get a blow out(blow to bhind) type.. blive will hv beter air flow than blow in type..
so mayb js go to xigmatec sd964

mean which type bracket will make it put as horizontal??
my mobo can or nt?



as the red frame is the way to put pin... will this can make it blow out(toward behind)?

-delete-

This post has been edited by cdlim87: Oct 17 2008, 01:42 PM

oh... thn nid buy other kit for it if 1na put as blow backward... thn i will no more cheap..
mayb js go to a blow in type de as gemin II S or geminII will ok i thk...