@sepulgilo
10th anni default setting is 2.2v ? are u sure ?

Lazy nia..The only way to save power since my CNQ didnt works in state of overclocking mode..
Plus if i restart edy waste time

that what i found on net heehhehehee

can check with 10th anni user whats the default clock for it

how bout AOD (AMD OverDrive)

AOD Support SB600 and 770 meh?I thought 7 Series only?

donno bout dat..
izit true? thats y my rig hang.. hahaha

Max warranty vDimm is 2.2v.
Default is 1.8v

Default speed 667MHz @ 1.8v

-pWs-

ok thanks bro

but i cant make it working on my m2n-e it works on other board with no problem

This post has been edited by sepulgilo: Nov 6 2008, 12:06 AM

i tried to use 2.1v on my corsair dhx but my rig failed to boot..
noe y?


This post has been edited by anep: Nov 6 2008, 01:05 AM

What do you meant by cannot works?
I know Asus M2N-E's max vDimm is 1.95v.

That is why I ask to go loose timing.

Details pls.

-pWs-

i tried to set 4-4-4-12 and highest vdimm to 2.1v but cant boot.. have to clear cmos..

What ram speed you running at?
Is it clock speed the same before and after?

Sometime u need more vCore to do it due to the integrated memory controller.

-pWs-

500mhz..
or 1k mhz

You will need roughly more than 2.2v at that speed.

-pWs-

but i use 1.95v ok je..

1.95v at what speed what timing?

The more tight the timing, the more vDimm needed.

-pWs-

i use this ram on default setting but seems it wont boot but when i change the setting manually from gskill and replace it back to 10th it does work n if i change the setting direct from 10th it wont boot again

ive tested on other board seems to work normally without any issue

wah suddenly become ram OC thread.

@sepulgilo

your 10th ok or not? memtest. if default also cannot boot then must be problem ler.

i wonder how much u guys pay bills with all the oc set 24/7. got above rm200 ka?

no la.. dont on pc 24 hours.. usually at home we downclock..
at U only we oc kaw.. dont have to pay the bills.. hehe..

@-pWs-, xixo_12, sepulgilo,ah_khoo
from ur experience.. at 2.0v, whats the highest speed n tight timing u guys had achieved ?

2.05v
310MHz @ 4-4-4-12

-pWs-