but u need promise to her that u will goreng this thread as panas as her or hotter thn her....

this job will not a prob for MENCHELSEA...

add sink to PWM should be ok oledi rite..?( if ply phenom)

9550 default HT link is 2000..?
if ya, thn urs is ok oledi.. as long as dun OC HT too much thn will be gud enuf..

edit:
default HT is 1800, so try to stick to the default HT, OC HT will dun hv any improvement in performance. lower ur HTlink multipier, lower thn 1800 oso not a prob..
good luck..

This post has been edited by cdlim87: Nov 1 2008, 09:18 PM

im not vy noe about software base OC.. oni noe OC thro BIOS.. u js lower ur HT link multiplier lor... make it stick to 1800 or below.. thn it will gud enuf..
these type of unstable is divide to mobo unstable:
1. FSB in amd call HTT
2. HT link( athlonx2=1000, phenom=1800,2000)
3. NB frequency(phenom only)
4. TDP support by ur mobo (eg: some mobo is 140W cpu supported)

all this is for mobo stability issue that nid to care for OCing..

to be sure still nid care on max cpu freq & RAM freq..

*corect me if geting wrong...

yea.... push to 3.0GHz will pwn ah_khoo down...
but thn dun fried ur proc...care ur PWM temp as ah_khoo told u js nw..
actually oc more 400Mhz oledi gud enuf

phenom pantang over 60C...

haha.. ya oso lar... always over 60C will make proc life shorter...

-----------------------------------------------------------------------------------------

hey guy...wat ur opinion abt energy efficient version?
like:-
45w-athlonx2 4450e(2.3GHZ) , 4850e(2.5GHz)
65w-phenomx4 9150e(1.8GHz) , 9350e(2.0GHz)

-any comment abt thm??
-do u thk thy will did beter in OC??

This post has been edited by cdlim87: Nov 2 2008, 03:03 AM

@xixo_12

BTW ur mobo really strong la..!!!! HT link 1.5k still stable kah??

------------------------------------
@MENCHELSEA

i dun thk PWM that u highlight there is correct la,, PWM here if no mistake is call power mosfet, wat u highlight there is is inductor..
it should be like this :-



This post has been edited by cdlim87: Nov 2 2008, 02:43 PM

@MENCHELSEA

dun be lazy..!! if not how u bcome next TS...
kding kding..

@xixo_12
errr, u using wat mobo oledi ar??
edit:
still 690? hvn sell kah? or oledi DFI LP...??

This post has been edited by cdlim87: Nov 2 2008, 03:09 PM

@ mruzian
ur oledi get bec ur rma de DFI NF ULTRA-II..??
nice wor... dfi not using solid cap oso can go till sooo high htt.. 340 oledi...!!!
-------------------------------
edit:
althou it oni with 3 power phase(inductor) but the design using there is 3 power mosfet to support 1 power phase, that make it come out with this good result..
** its my opinion la...

This post has been edited by cdlim87: Nov 2 2008, 06:26 PM

haha... so it must match to legend of amd proc ''38f3'' oso rite.. legend + legend ...

take silver stone oso not bad bro..

yup agree ..
if no mistake i got saw frm forum ppl say hunkey is a good psu for buget series la... but thn, some of thm say hunkey psu will produce someting sound whn heavy load.. i oso not vy sure about that.. u beter to check it out b4 get it,, once bought thn no regret...

*personal sugest can get a silverstone 400w still in ur buget n its still good for ur rig spec...

This post has been edited by cdlim87: Nov 2 2008, 08:22 PM

lol...super GEM there...
mayb is the 1st proc of amd can go 4.0 is on ur hand nw... goodluck
--------------------------
**edit
mine enable CnQ downclock to 200*5, Vcore 1.136..

This post has been edited by cdlim87: Nov 2 2008, 09:37 PM

hehe.. u really nid a nice mobo there.. that can gv u put 400x10..!!!
thn u can break dblooi record..

This post has been edited by cdlim87: Nov 2 2008, 09:40 PM

zzzz js notice that ur cpu-z version is new 1(v1.48)...
mayb due to cpuz prob.. try older version(v1.47) see how.. as ur everest n aibooster result oso show it 1.3v..

This post has been edited by cdlim87: Nov 2 2008, 09:53 PM

yaya,, mayb js a wrong reading la.. i tod is a super GEM..
if cpuz 1.47 still show it 1.15v thn u r lucky bro..!!

This post has been edited by cdlim87: Nov 2 2008, 09:55 PM

how about if only use 1 type... i mean u oni use 1.47, dun ON everest n aibooster..

haha
thn mayb its right la.. good luck bro..
** BTW i thk the software come with asus board de will gv more accurate reading la.. js my opinion la..

This post has been edited by cdlim87: Nov 2 2008, 10:22 PM