vista SP2 is out, yo...

Hi all PRo here,
my PC now keep on restarting....
no sign b4restart like bluescreen or wat.... jt sudd my comp like the proc sudd stop and the mobo light still blinking.... and then it start normal loading.....
could it be my PSU prob? as my PSU is cap ayam peak 400W only. previously my rig got 3 80mm fans but i remove it also the same situation happen......


BTW, how much i can sell my GC??? RM50 can ma??

This post has been edited by e_k1117: May 4 2009, 08:43 PM

try reseat your rams and your graphics card. maybe loose somewhere.

and yes, RM50 is very reasonable price for your 9600SE since SE is a crippled 9600XT/Pro

This post has been edited by edministrator: May 4 2009, 09:02 PM

i was jt reseat them all coz my pc can't on. so i plug out all gc and ram and then replug it bac only.
dunno why my pc sometime can on but got no display then need to replug bac the ram and gc.....

maybe PSU problematic already. go into bios and check your 12V, 5V and 3.3V readings.

u mean go my pc Health in BIOS??

12V => 11.97
5V => 5.13V
3.3V=> 3.24

Vcore = 1.20V

5V SB = 4.96V

VCore 1.20V <---- that low? the default for prescott should be around 1.3875V.

This post has been edited by edministrator: May 4 2009, 09:59 PM

even i use my cpu-z also showing 1.248V only
izit PSU prob.??
can take to RMA bcoz of that??

is my proc under power??

This post has been edited by e_k1117: May 4 2009, 10:09 PM

i don't think your CPU is still under warranty, lol.

anyway, try go to your bios setup and increase your vcore, that'll do.

how if still got waranty?? can it really RMAable?

set to wat value for my Vcore??
act i got OC my proc till 3.2Ghz
so what is the rite value for it?

This post has been edited by e_k1117: May 4 2009, 10:21 PM

set 1.4V should be fine, and test from there onwards.

hmmm, how to test it?? knowing whether it is correct?

Prescott is very easy to o/c. If your system can support,3.6GHz won't be a problem for you.

if i increase my Vcore can i increase also my bus speed?
nw mine 1 is 214x15. i jt use my BIOs default OC value....how to up the multiplier??
how to pump it to 3.5Ghz?? need to set other things?

wat u mean by my system can support??

This post has been edited by e_k1117: May 4 2009, 10:37 PM

multiplier is locked. only FSB can be pumped. but be careful of your RAMs also, they may not be able to cope with your OC if they are valuerams.

really ah... my RAM both are value RAM 1 is kingston(512mb) & 1 is corsair(1Gb)

The main concern would be your mobo,your mobo chipset is not Intel 865P right?

i think mine 1 is VIA
so means it can't go future anymore?

Can do o/c too,but don't put high hope on it.3Ghz to 3.2Ghz shouldn't be any problem.

my MOBO BIOS canot set Vcore one wo. how come?