try to up the vcore bit by bit. i am using E8400 (c0 stepping) and asus p5q deluxe; 24-7 @ 4.0GHz. i do enable load line calibration, and under load i need 1.272v to be able to pass 6-hours of occt's blend test. the other voltage are as follow:
vNB - 1.20v
vFSB - 1.10v
vPLL - 1.50v
vDDR - 1.90v - depends on the ram (i am using ocz flex 9600)

@zuhair
1000 cl5 @ 2.1vdim?
wow...dats high
would u like to share some of ur flex results?
i heard the older version can do miracle

[/quote]
this is flex pc9600 - the standard rating is 55518 @ 1200 - 2.10v (non micron). had it at 1290 55515 @ 2.1v stable

in bios, set @ 1.28175v. LLC enabled. idle @ 1.260v, load @ 1.272v


same as above

all setting are with LLC enabled

screenshot @ 535X8 @ 1.408v load + 1284 55515 PL8 @ 2.10v 20pass of LINPACK v1.80



screenshot @ 480X9 @ 1.416v load + 1280 55515 PL7 @ 2.10v 5hours of OCCT blend

nah, my 24/7 setting is at 4.0ghz and 1200 55515 PL8 @ 1.90v


will get to it after work.

everest bandwith

memory read


memory write


memory copy


memory latency


and bios setting for 1200mhz - this is for casperito

main setting - fsb


ram setting - alpha timing


ram setting - secondary


voltage




This post has been edited by zuhair: Nov 5 2008, 11:45 AM