|
westlife
|
 May 22 2011, 09:18 AM
|
|
QUOTE(maxximus @ Oct 6 2008, 10:00 AM) Yes Crystalline70 is not smart tag friendly, but there is a work around to solve the problem, no worry... nah, i just installed 3M crystaline CR70 for my Honda Insight front windsreen + front rear windows and CR40 for rear windscreen and behind rear windows. perfect. can work with smartag and GPS with totally no prob at all.  CR40 darker but helps to reject more heats. 
Added on May 22, 2011, 9:20 amQUOTE(ffisco @ Apr 25 2011, 11:52 PM) Can any body confirm that 3M is giving E-warranty when they install 3M product on their cars in 3m authorized installer. I heard some 3M installer dont offer this e- warranty. Are they installing genuine 3M product???? . confirmed if u install 3M car tint at authorized they will give u a serial no to register for ur warranty online. unless urs is fake one which installed at ah beng shop outside.  This post has been edited by westlife: May 22 2011, 09:36 AM |
|
|
|
|
|
westlife
|
Oct 15 2011, 05:46 AM
|
|
|
QUOTE(thaisxs @ Oct 15 2011, 01:00 AM) got quote for 2.3k by authorised dealer in penang the 1 and only that appear in Penang region. dealer lan si a bit they said cr50 kena saman wont guarantee if for cr 60 kena saman can claim from them. another 1 quote for 2k. ..they claim is 3m original got warranty and etc but they r not in the authorised vendor list not in the authorized list then anything you makan diri only.  |
|
|
|
|
|
westlife
|
Dec 1 2011, 07:34 AM
|
|
|
QUOTE(zorex @ Nov 30 2011, 09:41 PM) juz whacked CR70 on front and CR50 the rest on my new ride. mine same front cr70 rear amd side CR40. |
|
|
|
|
|
westlife
|
Dec 10 2011, 07:14 AM
|
|
|
QUOTE(kelvyn @ Dec 9 2011, 09:52 PM) 3M will face problem with smart tag & GPS. Unless you are willing to cut a small hole or open the window when passing the toll booth. nah i am using 3M on two cars. both no prob with GPS (perfect) and smartag (only need to slow down) at all. |
|
|
|
|
|
westlife
|
Jan 27 2013, 09:44 AM
|
|
|
QUOTE(ZeroSP @ Dec 18 2011, 08:08 PM) I am using 70 front, 60 all others on my Civic... Smart Tag definitely not friendly, but you still can use... You just need to put your TAG closer to windscreen and slow down much... I always pass it around 15-18KM/H no issues... GPS no issue... I got my signal within 10 secs... I am using CR70 for front windscreen and rear side windows. CR40 for rear windscreen and rear side windows... SmartTag definitely friendly but only at specific location, I had tested all position only one position works perfectly, also no need to slow down a lot also can detect... the best position is in the middle of windscreen... confirmed can detect, no problem... |
|
|
|
|
|
westlife
|
Jan 27 2013, 09:46 AM
|
|
|
QUOTE(christinelcy @ Oct 18 2012, 03:13 PM) hi for 3m Crystalline series (40/50/60/70) which is the best? suggest u only front windscreen CR70, while rear and side all CR40......... |
|
|
|
|
|
westlife
|
Jan 27 2013, 09:47 AM
|
|
|
QUOTE(creed @ Dec 27 2011, 05:30 PM) Just tinted Crystalline series, during the demo of the infra red heat generator, can feel the film block most of the heat and its cool to be touched. After tinted, can't really test as its late evening, yesterday when I drive around during afternoon on the highway, still feel the heat of the sun shining through the windows even though my car just came up from the basement. Do u still feels the warmth of the suns through the windows after tint? Guess my expectation was too high after test the demo in the shop that the film block almost all if not all of the heat generated by the red infrared lamp. cheers no, mine does not feel the heat (can say at all) only feel the shining of sun only.... |
|
|
|
|
|
westlife
|
Jan 27 2013, 09:58 AM
|
|
|
QUOTE(viper1912 @ Oct 20 2011, 08:52 AM) For those who is not so daring and afraid that JPJ or Polis will saman...they normally will go for Front 70% & the rest is 50%. If you want really good, I would say the front go for 60%. Previously my CT was on CR70, now my new ride is CR60% for my front windscreen. I found the heat rejection is better as compare to Crystalline 70. So I normally will advice friend to tint front for 60% the rest you go for 50% or lesser. I did my Kelisa front is 50% but is not Crystalline but is 3M FXHP50, the rear windscreen is ColorStable 35. yeah, agreed. 70% too clear, if 60% should be better. side 40% the best.... also good that people cannot see thru so clearly from the side..... |
|
|
|
|
|
westlife
|
Jan 27 2013, 10:00 AM
|
|
|
QUOTE(kelvyn @ Dec 9 2011, 09:52 PM) 3M will face problem with smart tag & GPS. Unless you are willing to cut a small hole or open the window when passing the toll booth. no, confirmed no need. GPS (anywhere) and SmartTag (as long as at the middle of widnscreen) works fine... |
|
|
|
|
|
westlife
|
Feb 12 2013, 11:40 AM
|
|
|
QUOTE(cucubud @ Feb 1 2013, 10:49 AM) Does the CR40 pass the JPJ 50% on the side windows? not passed, but it does not matter to me, as long as no sell car.. i also won't sell my car for the next few years... CR40 the darkness is just nice..... |
|
|
|
|
Quote
0.0154sec
1.56
7 queries
GZIP Disabled