ok sifoo. I need help to guide me to some oc which i'm noob. I got my rig with this spec:
1. C2D E6320
2. n650sli-ds4
3. 2gig kit ram
Now i alr start a bit of oc which the max i can go. I set the clock to 7x at 390 (ori 266.7)
when i they in cpuz the multiplier keep running from 7x to 6X or the other way round. Issit normal? Is yes can i fix it to 7x?
I goggled and i found that they can clock to 500. So sifoo what is the next step which my rig can clock to 500. So far now which i will unload my screenshot later. Thanks

To fix the multiplier, turn off EIST. Turn off C1E as well.
Then, increase your FSB 10Mhz at a time. Stress test with IBT 10 loops.
Whenever you fail IBT, increase Vcore one notch. Whenever you pass, increase FSB and repeat.

ok i'm able to to turn off EIST and C1E
but now i cant my FSB 390Mhz is max... if i i increase to 400Mhz then it will restart
and what is IBT?

This post has been edited by miau18: Sep 29 2008, 01:35 AM

IBT = Intel Burn Test

http://www.ultimate-filez.com/index.php?page=downloads

one noob question here,compare to other stressing program like prime95,orthos to IBT,which one are better?

What's your Vcore at 390Mhz? Increase your Vtt and Vnb one notch and see if it passes. If not, go higher (not too high!) and see when it is stable.

ok this is my current setting... my current Vcore is 15V

This post has been edited by miau18: Sep 30 2008, 09:53 AM


Attached thumbnail(s)

hi looking at your image, did you try vcore 1.5 at first attempt? cause my opinion, your vcore is to high for such low core speed . You should trying start from a stock vcore first and increase the fsb 5-10 at a time. if you do not have time, maybe should trying google vcore setting by others for your procs. and go from there.

goodluck

i try the default 1.35 also like that.... 1.5 is not my first attempt