lucky u din't killed him~

same person ar..

the door kemek only.. the window oso no pecah...

nth weird, mine last time oso tarak pecah...

no worry~
petrol on u only~ 

of cuz~
my darling all feed on V-power only~   

---

Added on September 30, 2008, 11:38 am
me small pipe only~
but whole car wit blood n scare my mom off wen my dad n mom wen 2 ipoh look for me~

dun worry~
i got new GB liao~     

oo... ic.
u kasi diy for him la... lol.. 

that means now u dun hv car, then u stick a 'car' sticker on ur shoe, then u own a car d lor....

hey there fellow wiraian, how much to change 1 pair of caliper only?

i noticed some car with red caliper which look very cun

This diy is best done on a hot sunny day.

Material :
1. 1-2 can of paint spray(colour depend on personal taste and best if can buy heat resistant spray)
2. 1 can of clear coat spray
3. Size 17 ring spannar & hammer
4. Brush
5. A bucket of clean water
6. Newspapers
7. Handglove (Optional-Only use it if you don't wanna make your hands dirty)

Step 1:Loosen ur rim nut but don't totally remove it. You might need to step on wrench to loosen the nut

Step 2:Use the car jack to jack up your car.Then remove the nut and rims.

Step 3:Lets say you're doing on the driver side of the caliper first, then turn ur steering until the driver side brake is facing outward. Use the size 17 spanner to unlock the lower nut(see pic below). You might need to use some force on the spanner as the nut is locked tightly. A hammer comes in handy in such situation. After that slide the caliper upward to remove the metal plate and the brake pad.

Step 4:Brush your caliper with clean water till the caliper is totally clean. You can apply some degreaser or car wash to make it cleaner. Then leave it to dry under hot sun or use a blower to let it dry faster

Step 5:Cover all parts you don't wish to spray with newspaper and make sure they are covering the parts properly else you might spray on parts you don't wanna spray.

Step 6:Spray 3-4 thin layer of spray paint to the caliper. Once you sprayed a layer on it,leave it totally dry before you spray another to it.

Step 7:After you satisfied with the colour,spray 1-2 layer of clear coat to the caliper. Same thing,let one layer dry before you spray another layer to it.

Step 8:After the clear coat is totally dry,put back you brake pad and the metal in place. If you unsure how to install it back try seeking help from people who are familiar with car parts.

Step 9:Lock nut back to the caliper and make sure you tighten it tightly. Put back your rim and tighten the rim nut.

Step 10:Repeat step 1-9 on the other side and you're done.

Photo:

Removed the rim and nuts


Turn the steering until the brake is facing outward to make your work easier


Size 17 ring spanner


Unlock the nut showed on the pic.


Leaving the caliper to dry after being cleaned.


The final result.

that DIY u post need alot of work man !

mine simply 10minute work jz try try oni dam ugly now

no need 2 trash edi~
very good gb here~

bye bye every1....im go penang now.....makan angin lor~~~~
enjoy the holidays!!!!!    

lol, i plan to diy ice for my car lol , maybe need to get some electronic plan first

i miss penang food 

don't complain la.. if u were in my shoes... lagi teruk

ur car monster....so have to scare....v have stock car...nt ned scare...haha