I have OC my E5200 G31M-ES2L to 3.2ghz (266x12)..
I have mushkin RAM DDR2 800, the multiplier i set to 3.33 --> 3.33 x 266 = 889..
i set vcore to AUTO (in Cpu-Z it show 1.344 - 1.360) and the temp. 40c (idle) - 55c (load)..
the Rated FSB in cpu-Z is at 1064 mhz..
but i don't think there's any improvement compare to stock speed..
how did i know?
i convert a video using stock speed for ~40 minutes and using 3.2ghz also ~40 minutes using same settings..
any opinion?
thanks

oh thanks..
i haven't test it yet as i'm playing l4dead right now :)
but i cannot overclock it using 333mhz, anything above 266mhz is FAIL..
i did set the voltage to 1.4 but fail too..
this must be due to mobo.. :sigh:
3.6ghz will be nice..hoho