Here's the story,

i had a iphone 2G 1.14, then i updated it to 2.0 n tried to pwned it with winpwn 2.5 beta 2, but keeps getting error (6), i even tried fw2.01 and 2.02 both stil the same, i'm pretty sure i got the dfu mode correct. but i been trying for 2 days stil in vain. now i wana downgrade it back to 1.14. In the end after i use ziphone or iliberty both having the same problem. My telco network cant be detected, as in "no signal"

Pls help me!!!

---

Added on September 11, 2008, 10:30 pm1 more thing, i tried my sim card on other iphone too, n its working.

This post has been edited by iori_argami: Sep 11 2008, 10:30 PM

i think that, you will need to use boot neuter to clear all the residues away.


but i am not too sure about this technical issue. kindly wait for another suggestion

This post has been edited by nokia2003: Sep 11 2008, 10:34 PM

@iori_argami
Make sure u download the correct firmware for the 1st gen iphone. I suggest to stay with 2.0.1 since the 1st gen don't benefit much from fw2.0.2. U can download it here.

When u finish downloading it, restore the phone with the stock fw (not the custom one). This should settle the error 6 that u been having. Once its finished restoring (u'll be at the emergency call only display), close itunes and start with the winpwn process to create custom fw. Make sure the 2 icon on the top right shows Custom and Expert:On. We will use the expert mode to be more detail.

1. Choose the corresponding iphone
2. Choose the corresponding fw
3. Choose not to unlock the phone. Do it later thru Cydia
4. Choose to activate iphone
5. Choose to activate YouTube
6. Choose to install Cydia (mandatory)
7. It's up to u if u want to install installer 4 as its still very buggy.
8. Choose to resize partition
9. Do not wipe data
10. If you want to use custom boot logo then go for thumbs up. If not then the opposite
11. Increase the root partition size to 600mb
12. Search for the fw that u just downloaded
13. Select the place where u want to save the custom fw
14. It will create the custom firmware
15. Follow the instruction to put the phone into DFU (DFU mode means the screen is black with nothing on it, itunes will detect it and ask to restore)
16. Restore the phone with custom fw while in DFU mode

After restore, open Cydia n find bootneuter and use it to unlock/flash back the baseband. That should cover the steps ..... I think.

thanks for ur steps... but i'm stil having the prob after tried twice... any more help??? pls....

Wow..that's really odd. Maybe firmware or the bootloader corrupted. Oh well..you may wanna try downloading the firmware and bootloader again.

Here's the link to the firmware and bootloader.

http://forum.lowyat.net/topic/773801

thanks for ur help again... but i'm pretty sure the firmware is not corrupted, as i can restore it to the original state "emergency call" but nevertheless i'l try to re-dl the firmware n bl again... tq.... any other suggestion??

---

Added on September 12, 2008, 9:55 pmupdated... stil cant after i dled the 2.01 firmware n bl... tried twice... stil got the error (6)

anymore pro??? pls pls pls.....

This post has been edited by iori_argami: Sep 12 2008, 09:55 PM