AMD® Socket-AM2&AM2+ Overclocking V10, ~overcooking ur proc here~
|
|
 Sep 6 2008, 02:16 PM
Return to original view | Post
#1
|
 
Junior Member
169 posts Joined: Sep 2006 From: Kepong, KL   
|
Im ocing in AX78,
whenever i OC my cpu FSB to more than 220, the bios will stuck at startup page and tell me to set the clock lower at Sofmenu. Is tht anythg i can do abt it? all voltage is setting at their default value.. the cpu voltage default is 1.4V... i hav to increase more? i OCing with increase FSB, lower Multiplier, and then set HT multiplier to 4 did i miss some other setting? and if i hav to increase vcore and vdimm voltage, how much shud i increase it? thank you  |
|
|
|
|
|
Sep 6 2008, 02:53 PM
Return to original view | Post
#2
|
|
Junior Member
169 posts Joined: Sep 2006 From: Kepong, KL
|
My Spec:
CPU: AMD Athlon 64x2 6000+ Mobo: Abit AX78 RAM: Corsair xms2 1GBx2 800 PL:4-4-4-12 PSU: Acbel M8 750w GC: GeCube HD4870 help me plzz |
|
|
Sep 6 2008, 03:05 PM
Return to original view | Post
#3
|
|
Junior Member
169 posts Joined: Sep 2006 From: Kepong, KL
|
my question at post #122
|
|
|
Sep 6 2008, 03:08 PM
Return to original view | Post
#4
|
|
Junior Member
169 posts Joined: Sep 2006 From: Kepong, KL
|
QUOTE(AMDAthlon @ Sep 6 2008, 03:05 PM) No wonder..6000 Processor dont expect to push high.. i know it cant push high..bro pWs this is his problems "Im ocing in AX78, whenever i OC my cpu FSB to more than 220, the bios will stuck at startup page and tell me to set the clock lower at Sofmenu. Is tht anythg i can do abt it? all voltage is setting at their default value.. the cpu voltage default is 1.4V... i hav to increase more? i OCing with increase FSB, lower Multiplier, and then set HT multiplier to 4 did i miss some other setting? and if i hav to increase vcore and vdimm voltage, how much shud i increase it? thank you"  i wish to push like x2 6400+, 3.2 ghz then im satisfy.. and i found tht my ram is running at 375mhz, which is running underclock  and thus i wish to OC a bit.. not expect to push high here.. |
|
|
Sep 6 2008, 03:16 PM
Return to original view | Post
#5
|
|
Junior Member
169 posts Joined: Sep 2006 From: Kepong, KL
|
QUOTE(ah_khoo @ Sep 6 2008, 03:06 PM) increase v nb 1.1v a notch or 2... if possible use ganged mode for memory... easier to be prime stable. bios 13 is better, but u gotta flash it in dos mode... ya i will try tht, but flashing bios is a NO NO   i hav use flash menu provided by Abit, it erase my previous bios and HANG there(in windows)  and for flashing in bios.. altot i know how to do it but i dun hav the courage anymore, haiz. and for bro AmdAthlon: my setting: 250HTTX13 1.40VCore VDIMM <------- is this RAM voltage? 4-4-4-12-21 2T RAM voltage i put at 2.1V all other voltage settings are in default.. |
|
|
Sep 6 2008, 03:26 PM
Return to original view | Post
#6
|
|
Junior Member
169 posts Joined: Sep 2006 From: Kepong, KL
|
QUOTE(ah_khoo @ Sep 6 2008, 03:22 PM) flashin bios in dos is a lot more safe than doin it in windows. it's not as scary as u think mate.  loosen timing, increase v nb 1.1v to 1.17~1.20v, lower vdimm to 1.9v, put 12*300 instead, use divider 533 will do.  thx bro ah_khoo,I will try it once my mobo is back from RMA, (flashing bios cause THAT rma  ) |
|
|
Sep 6 2008, 03:46 PM
Return to original view | Post
#7
|
|
Junior Member
169 posts Joined: Sep 2006 From: Kepong, KL
|
» Click to show Spoiler - click again to hide... «  3.5ghz and ur SuperPI 1M result is? how much u set for ur Vdimm? thx to teaching me here and a question... wat will happen if i failed to flashing bios in DOS, will it HANG or sumthg? see quite of some tutorial online. seems tht the rate to failed is reli low.. might giv it a try AFTER SOME TIME  not even dare to imagine tht i hav to sent the mobo to RMA again.. now havent get back Added on September 6, 2008, 4:01 pmand bro superworm, wat cooler u using? This post has been edited by onimusha333: Sep 6 2008, 04:01 PM |
|
Topic ClosedOptions
|
| Change to: |  0.0344sec
 0.32
 7 queries
 GZIP Disabled
Time is now: 8th December 2025 - 09:10 AM |
Quote
