QUOTE(digswell @ Sep 5 2008, 09:08 PM)
what model is da....???
this is d model bro... GA-MA790GP-DS4H 
AMD® Socket-AM2&AM2+ Overclocking V10, ~overcooking ur proc here~
|
|
 Sep 5 2008, 09:43 PM
Return to original view | Post
#21
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.  
|
|
Quote|
|
|
|
|
Sep 6 2008, 03:06 PM
Return to original view | Post
#22
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(onimusha333 @ Sep 6 2008, 02:16 PM) Im ocing in AX78, increase v nb 1.1v a notch or 2... if possible use ganged mode for memory... easier to be prime stable. bios 13 is better, but u gotta flash it in dos mode... whenever i OC my cpu FSB to more than 220, the bios will stuck at startup page and tell me to set the clock lower at Sofmenu. Is tht anythg i can do abt it? all voltage is setting at their default value.. the cpu voltage default is 1.4V... i hav to increase more? i OCing with increase FSB, lower Multiplier, and then set HT multiplier to 4 did i miss some other setting? and if i hav to increase vcore and vdimm voltage, how much shud i increase it? thank you   QUOTE(superworm @ Sep 6 2008, 02:32 PM) here's the result for my X4 9750+.. the funny thing is... i'm using 2 x 1GB DDR2 266.. ekekeke... nice clock there mate...  crop & resized to 800 x 600  crop & original resolution » Click to show Spoiler - click again to hide... « original 1600 x 1200 uncrop... http://i130.photobucket.com/albums/p242/om.../Phenom9750.jpg  This post has been edited by ah_khoo: Sep 6 2008, 03:10 PM |
|
|
Sep 6 2008, 03:22 PM
Return to original view | Post
#23
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(onimusha333 @ Sep 6 2008, 03:16 PM) ya i will try tht, but flashing bios is a NO NO flashin bios in dos is a lot more safe than doin it in windows. it's not as scary as u think mate.  i hav use flash menu provided by Abit, it erase my previous bios and HANG there(in windows)  and for flashing in bios.. altot i know how to do it but i dun hav the courage anymore, haiz. and for bro AmdAthlon: my setting: 250HTTX13 1.40VCore VDIMM <------- is this RAM voltage? 4-4-4-12-21 2T RAM voltage i put at 2.1V all other voltage settings are in default.. loosen timing, increase v nb 1.1v to 1.17~1.20v, lower vdimm to 1.9v, put 12*300 instead, use divider 533 will do. |
|
|
Sep 6 2008, 03:31 PM
Return to original view | Post
#24
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(xixo_12 @ Sep 6 2008, 03:23 PM) ok edi.. digswell help me too yesterday.. thx -pWs- n digs glad to hear that bro, ko punter router kene hack ke?  QUOTE(-pWs- @ Sep 6 2008, 03:23 PM) True. Flashing is not scary. wah bro... dun try to scare him leh... Two output only ma. » Click to show Spoiler - click again to hide... « -pWs- QUOTE(digswell @ Sep 6 2008, 03:26 PM) wrong getaway IP adress.....i still think y prolink hv to put xxx.xxx.xxx.254 as default getaway IP usually is XXX.XXX.XXX.1 yup, by default many will assign 192.168.0.1...  QUOTE(onimusha333 @ Sep 6 2008, 03:26 PM)  thx bro ah_khoo,I will try it once my mobo is back from RMA, (flashing bios cause THAT rma  )QUOTE(digswell @ Sep 6 2008, 03:29 PM) Look like abit ax78 hv problem flashing bios in windows......better do it in DOS mode it's not that abit havin problem with flashin bios in windows bro, it's d bios (bios 13) is only meant for dos envirionment flashin. no prblem to flash bios 12 in windows as it was written that way....  d only down side of ax78 is d unavailability of nb multi adjust, thou some claimed that they have that option but no to majority. This post has been edited by ah_khoo: Sep 6 2008, 03:34 PM |
|
|
Sep 6 2008, 10:45 PM
Return to original view | Post
#25
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(awh85 @ Sep 6 2008, 07:21 PM) hi guys, i noticed the discussion on the Biostar TA790GX A2+ in the previous thread but couldnt seem to find the price of it. u can't count like that mate, i used to estimate price based on sellin price of newegg, but end up d price is lot more expensive after conversion... also noticed that dblooi is the only one with the board as of now and the OC results on the x2 3800+ F3 are quite remarkable. its listed on newegg as USD100 so im guessing that it should be around RM3xx? anyone whether or not it is available yet, where, and how much? thanks. added: another thing i wanted to ask was on the warranty of Biostar mobos, if i remember correctly, we had 2 or 3 members here warrantying their Biostar boards with Alphamatic, may i know how the process was? Was the RMA waiting duration long? QUOTE(ameque @ Sep 6 2008, 08:28 PM) IMHO, the new sb750 would be a bit high, starting rm400 and above. i bought it @ $175 bro... ahkhoo from singapore, he bought the board for SD 170 something (if i remember correctly). QUOTE(-pWs- @ Sep 6 2008, 08:33 PM) Ermm..dblooi bought it?? u don't need to broadcast it here bro... I thought the manufacturer give him one for review. -pWs- QUOTE(ameque @ Sep 6 2008, 08:37 PM) ahkhoo selling?!?! y??? wats his next mobo?? no, i'm not givin up on biostar... yet... |
|
|
Sep 7 2008, 12:32 AM
Return to original view | Post
#26
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(sarahlah @ Sep 6 2008, 11:37 PM) wah another new TS.. hoho.. just d v nb 1.1v will do bro... u found a replacement chip ledi? @ah_khoo bro.. i will try to oc tonight.. just got my new psu.. increase NB 1.1v to 1.17-1.2 and SB 1.2v to 1.3v right ? just wanna try ur method.. |
|
|
|
|
|
Sep 7 2008, 12:22 PM
Return to original view | Post
#27
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(sarahlah @ Sep 7 2008, 02:36 AM) no la.. still my F3.. bro, it could be d chip askin fore more juice... they didnt manage to took my proc coz it stick together with the hsf.. haha Edited : is there any reason why i cannot oc my proc ? it will said cpu overunning when i set htt above 250.. it suppose can do 2.9ghz stock vcore.. haih  ram timin & voltage, htt multi all d same like b4? |
|
|
Sep 7 2008, 12:36 PM
Return to original view | Post
#28
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(sarahlah @ Sep 7 2008, 12:29 PM) i manage to oc it.. the reason is said cpu is overrunning because of my tcfc setting i guess.. when i set 105ns it wont boot.. after change it higher it will boot.. is this normal ? if u wanna set trfc @ 75ns, try to put ya ram @ slot 3 & 4. it mite work... my twinmos work best on those 2 slots instead of slot 1 & 2. |
|
|
Sep 7 2008, 12:42 PM
Return to original view | Post
#29
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(sarahlah @ Sep 7 2008, 12:38 PM) oh.. i will try it later.. 1 question.. is there any diff in tweaking 6400 and 8500 ram ? not so sure bro as i never have d chance to get ddr1066 rated ram. too expensive for me... btw, dd1066 ram are just oc'ed ddr800, so basically there won't be much diff... |
|
|
Sep 7 2008, 12:57 PM
Return to original view | Post
#30
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(sarahlah @ Sep 7 2008, 12:52 PM) i bought this ram because it cheap.. got promo from bro shawty.. hoho.. vdimm needed bro? here i attach the stable oc i manage to do.. [attachmentid=584293] [attachmentid=584296] [attachmentid=584299] CODE AMD Athlon X2 3800+ F3 | sarahlah | Abit AX78 | Crucial B. Tracer | 1032Mhz | 5-5-5-18-2T | AC Freezer 64 Pro Plz update my database bro xixo_12  @ -pWs-, bro, not everyone so lucky to have a gud batch mah... mine almost d same too... 
|
|
|
Sep 7 2008, 01:02 PM
Return to original view | Post
#31
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(sarahlah @ Sep 7 2008, 12:59 PM) ah sorry for didnt put memset ss.. not installed it yet.. 1.95v for 516MHz is sweet... r yas tracer double sided? 1.95vdimm  from what i read, double sided tracer can do wonders... @ -pWs-, bro, why shake head?  @ sarahlah, no, i use it to show d alpha timings only bro... This post has been edited by ah_khoo: Sep 7 2008, 01:05 PM |
|
|
Sep 7 2008, 01:11 PM
Return to original view | Post
#32
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(AMDAthlon @ Sep 7 2008, 01:07 PM) WHats diff with one sided and double sided? double sided a.k.a 16FD3 batch are known for their high overclockability... |
|
|
Sep 7 2008, 01:16 PM
Return to original view | Post
#33
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Sep 7 2008, 01:12 PM) @ah_khoo google d model lah bro..u lazy bum... What LCD you use ar? -pWs- lg 20 wide screen... i want 24 incher but $$$ not enuf.... |
|
|
|
|
|
Sep 7 2008, 01:54 PM
Return to original view | Post
#34
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
lotsa time needed for that bro, i'm afraid i can't... u know some ppl nowdays, if ur a bit late updatin their result, then they'll make noise...
 This post has been edited by ah_khoo: Sep 7 2008, 01:54 PM |
|
|
Sep 7 2008, 02:00 PM
Return to original view | Post
#35
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Sep 7 2008, 01:56 PM) -pWs- |
|
|
Sep 7 2008, 03:03 PM
Return to original view | Post
#36
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
9950 b.e is @ new low... $275... imsmiko mite be interested...
This post has been edited by ah_khoo: Sep 7 2008, 03:05 PM |
|
|
Sep 7 2008, 03:24 PM
Return to original view | Post
#37
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(-pWs- @ Sep 7 2008, 03:22 PM) I want 9650. ur referrin to intel qx9650 rite bro...  -pWs- amd 9650 is @ $242, not so worth it imo... just $33 way from d price of 9950... |
|
|
Sep 7 2008, 03:30 PM
Return to original view | Post
#38
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(AMDAthlon @ Sep 7 2008, 03:26 PM)  stop mention QX9650 or Phenom 9650  ..Have you guys heard of 125W/95W of 995BE and 9850BE?  140w ain't that bad, if one really so cautious bout d wattage, get a gud batch of 9850 b.e, it should perform as gud as 9950 b.e. QUOTE(-pWs- @ Sep 7 2008, 03:27 PM) Hahaha c'mon bro... w locked multi phenoms can't go that far... for d sake of higher clock, $33 (around RM80) aint too much mah...  Too expensive already. Price just a bit difference?? Ermm...In S.Dollar -pWs- This post has been edited by ah_khoo: Sep 7 2008, 03:35 PM |
|
|
Sep 7 2008, 03:54 PM
Return to original view | Post
#39
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(AMDAthlon @ Sep 7 2008, 03:34 PM) Is this good news?Lowest stock clock for Deneb is 2.8Ghz.THOU its released date on January 09 for sure x3 can clock higher than locked x4 from what i observed... but still, if their price are not attractive enuf, i'll go for x4 anytime... Still the TDP is 125W.. Anyone interested in Phenom 8850 X3 BE? QUOTE(MENCHELSEA @ Sep 7 2008, 03:38 PM) 9850 B.E should be a better choice for me , not so panas. yup, 0816 batch of 9850 can be as gud (or even pwn) 9950... |
|
|
Sep 8 2008, 02:22 PM
Return to original view | Post
#40
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(digswell @ Sep 8 2008, 10:25 AM) Someone selling AMD phenom 9550 2.2Ghz Quadcore + Gigabyte GA-MA790FX-DQ6 with a bit cheap price at Garage Sales just check, not so cheap bro...  QUOTE(tang @ Sep 8 2008, 02:00 PM) Hi , im going to buy AMD X2 5000+ pricing at Rm200 at lowyat...Anyone know is this proc is based on Brisbane core ?thanks u need to check d code... f2 = ADA5000CSBOX / ADA5000CUBOX f3 = ADO5000CZBOX g1= ADO5000DSWOF / ADO5000DDBOX g2 = ADO5000DOBOX hope this help... |
|
Topic ClosedOptions
|
| Change to: |  0.0362sec
 0.33
 7 queries
 GZIP Disabled
Time is now: 7th December 2025 - 04:06 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.