QUOTE(samliang @ Jan 9 2010, 10:13 PM)
anyone tried CM Hyper 212+ on i7 920 OC 4ghz?
Better dontAir Cooling Discussion Thread V3, Database, FAQ, Guides and Discussion!
|
|
 Jan 10 2010, 11:34 PM
|
 
Elite
8,711 posts Joined: Nov 2007 From: Butterworth, PG / Machang, Kelantan   
|
|
Quote|
|
|
|
|
Jan 12 2010, 01:44 PM
|
 
Senior Member
2,293 posts Joined: Feb 2006 From: Sarawak
|
QUOTE(andrekua @ Jan 9 2010, 07:06 PM) Anyone using Hyper 212+ with E8400/8500 c0? Nothing wrong with that, i had the same E8500 C0 processor and using Hyper 212+ too.I was previously using OEM cooler from Coolermaster (those annoying 4000RPM *******). Had my E8500 overclocked to 3.8GHz with 1.25v and temp at full load is around 72~75C depending on weather. Case is closed with one intake and one outtake fan. Now fitted 212+ with dual fan configuration. Due to heatsink too tall, I didnt close my casing but effectively unable to use any intake or outtake fan. I overclocked slightly more to 4GHz (422x9.5) with 1.35v (but showing 1.30v only @ full load). Temp at full load is kinda high @ 65C max (without a/c). Did I do anything wrong? I feel the temp is kinda high though. I did try lower the Vcore by 0.5v in the bios and it cools down a lot but unable to pass Prime. Is my temp normal, within range? I thought I should be getting 40-50C max with it. Temp around 70+ºC at 3.8Ghz with auto settings on Linpack stress. Voltage around 1.25V or 1.28V, not so sure. |
|
|
Jan 13 2010, 06:53 PM
|
Senior Member
1,649 posts Joined: Sep 2008
|
hyper 212+ is not really a powerful cooler ler.. thats why its being sold at such low prices :/
even with s1283... can go 478X9 @ 1.32v with e8400 .. temp also rarely touching 70C (can check out my friend's system under s1283 with the e8400) |
|
|
Jan 14 2010, 03:37 PM
|
Senior Member
719 posts Joined: Mar 2006 From: Setapak KL
|
hyper 212+ is a good budget cooler with cheapo price... coz it got all in one mounting for all socket.
using it on i3 4ghz idle 33c stress linx never reach above 65c. bcoz of its 32nm i tink  |
|
|
Jan 18 2010, 02:19 AM
|
Senior Member
1,269 posts Joined: Apr 2007 From: Shah Alam 
|
hi guys,
wats the diff between tuniq tower 120 extreme with the rev1 ? performance diff? thanks in advanced |
|
|
Jan 19 2010, 12:34 AM
|
Senior Member
1,484 posts Joined: Feb 2009 From: Kuching - Samarahan, Sarawak
|
can Tuniq Tower 120 Extreme fits inside CM Mystique 632?
 |
|
|
|
|
|
Jan 19 2010, 03:14 AM
|
Junior Member
241 posts Joined: Jan 2010
|
what's the performance difference between a tuniq tower 120 extreme
with STOCK fan and with higher RPM aftermarket fan on an i7 920 overclocked to 3.0++ghz? |
|
|
Jan 19 2010, 12:08 PM
|
Senior Member
1,256 posts Joined: Aug 2007 From: Ampang TO Sibu
|
TUNIQ TOWER 120 EXTREME crowned BEST CPU COOLER for Intel Platform overtaking Prolimatech Megahalems & Thermolab BARAM ~ BY FrostyTech
Source ~ Click Me  |
|
|
Jan 20 2010, 02:59 AM
|
|
Junior Member
241 posts Joined: Jan 2010
|
the tuniw tower 120 extreme's review is on the 775 socket dude... i read all about it already..
just wondering how it would perform on the 1366 socket coz i bought 1 myself already.. what's the best setup for the tuniq tower 120 extreme?? can you use more than 1 fan? |
|
|
Jan 23 2010, 05:33 AM
|
Senior Member
4,947 posts Joined: Nov 2007 
|
Hey, can Mega Shadow fit into CM690?
Edit: Oh nevermind, found out it can  This post has been edited by Silverfire: Jan 23 2010, 05:42 AM |
|
|
Jan 23 2010, 11:16 AM
|
Junior Member
85 posts Joined: Dec 2008 From: Sungai Petani, Kedah
|
QUOTE(Silverfire @ Jan 23 2010, 05:33 AM) Hey, can Mega Shadow fit into CM690? yup here you go.......Edit: Oh nevermind, found out it can 
Added on January 23, 2010, 11:21 ambro.. i am using sunbeam core contact freezer... also used tuniq x-2 thermal paste errrr.. i look at other people they able to maintain lower temp such under 30c by using phenom II 550... but y ia cannot get the same temp ya? idle for me is 39-41.... but i din unlock or oc... just used the stock speed... any idea? This post has been edited by Agultiamat: Jan 23 2010, 11:21 AM |
|
|
Jan 23 2010, 07:04 PM
|
|
Senior Member
1,484 posts Joined: Feb 2009 From: Kuching - Samarahan, Sarawak
|
Tuniq Tower 120 Extreme vs Thermalright Ultima-90i
which is better in terms of performance and value? |
|
|
Jan 24 2010, 04:44 PM
|
Senior Member
2,547 posts Joined: Oct 2007 
|
QUOTE(Agultiamat @ Jan 23 2010, 11:16 AM) yup here you go....... temps can be affected by your contact and also thermal paste spreading
Added on January 23, 2010, 11:21 ambro.. i am using sunbeam core contact freezer... also used tuniq x-2 thermal paste errrr.. i look at other people they able to maintain lower temp such under 30c by using phenom II 550... but y ia cannot get the same temp ya? idle for me is 39-41.... but i din unlock or oc... just used the stock speed... any idea? applying too much or too little can reduce its effectiveness and the idle temp dont really care la cos not all procs of the same type is gonna idle at the same temp u can jaga the load temp then can liao  QUOTE(captvizcenzo @ Jan 23 2010, 07:04 PM) Tuniq Tower 120 Extreme vs Thermalright Ultima-90i those two cooler are of different class actuallywhich is better in terms of performance and value? the ultima 90-i is considered somewhere near top of mid end while the tower extreme is considered high end cooler |
|
|
|
|
|
Jan 24 2010, 04:51 PM
|
|
Senior Member
1,484 posts Joined: Feb 2009 From: Kuching - Samarahan, Sarawak
|
QUOTE(tkh_1001 @ Jan 24 2010, 04:44 PM) the ultima 90-i is considered somewhere near top of mid end while the tower extreme is considered high end cooler  |
|
|
Jan 24 2010, 05:02 PM
|
|
Senior Member
2,547 posts Joined: Oct 2007
|
yup u can say so
|
|
|
Jan 24 2010, 08:24 PM
|
 
VIP
2,510 posts Joined: Dec 2004 From: Penang Island and Bidor
|
QUOTE(captvizcenzo @ Jan 19 2010, 12:34 AM) can Tuniq Tower 120 Extreme fits inside CM Mystique 632? I know that TRUE cannot fit for sure when the side panel fan is installed. even without the side panel fan, it's a very tight squeeze. but tuniq is about 10mm shorter than TRUE, so I'm very sure it will fit without the side panel fan. side panel fan on wise, i'm not sure. |
|
|
Jan 29 2010, 07:42 PM
|
Junior Member
34 posts Joined: Dec 2009
|
Have a Phenom II x4 955 Black Edition with Asus M4A77TD PRO motherboard in a Cooler Master Elite Series case. Stock heat sink fan is terribly noisy and I'm thinking of replacing it with the Cooler Master Hyper 212 Plus for lower temps + less noise. I'm worried about the contact surface not being smooth though. Any thoughts? Also, do I need additional products like thermal paste, etc.?
|
|
|
Jan 29 2010, 07:56 PM
|
|
Senior Member
1,484 posts Joined: Feb 2009 From: Kuching - Samarahan, Sarawak
|
QUOTE(thornduck @ Jan 29 2010, 07:42 PM) Have a Phenom II x4 955 Black Edition with Asus M4A77TD PRO motherboard in a Cooler Master Elite Series case. Stock heat sink fan is terribly noisy and I'm thinking of replacing it with the Cooler Master Hyper 212 Plus for lower temps + less noise. I'm worried about the contact surface not being smooth though. Any thoughts? Also, do I need additional products like thermal paste, etc.? i believe they will provide with thermal paste... |
|
|
Jan 29 2010, 11:36 PM
|
|
Senior Member
2,547 posts Joined: Oct 2007
|
QUOTE(thornduck @ Jan 29 2010, 07:42 PM) Have a Phenom II x4 955 Black Edition with Asus M4A77TD PRO motherboard in a Cooler Master Elite Series case. Stock heat sink fan is terribly noisy and I'm thinking of replacing it with the Cooler Master Hyper 212 Plus for lower temps + less noise. I'm worried about the contact surface not being smooth though. Any thoughts? Also, do I need additional products like thermal paste, etc.? u dont need to worry about the contact surface being smooth cos normally they will form it to the best shape to contact with ur proc...the thing u need to pay attention to is by checking the tightness of ur fitting when installing the heatsink to ur mobo.... tight fitting is a sign of the heatsink contacting well with the proc as for thermal paste normally they will provide u.... and u can source for some nice thermal paste if u want...those thermal paste normally gives u a performance increase of a few degree c better than stock ones i long time didnt update new thermal paste performance liao so i cannot rekomen liao  |
|
|
Jan 30 2010, 09:19 AM
|
|
Junior Member
34 posts Joined: Dec 2009
|
Thanks guys.
|
| Change to: |  0.0358sec
 0.36
 6 queries
 GZIP Disabled
Time is now: 9th December 2025 - 09:50 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.