will do

and is it normal to downclock the ram after we oc our proc?my ram was used to be 1066mhz but nw its running on 912 mhz

bout that i think u use 1:1 divider.

try using a different divider as it'll increase the clock of the ram.

er 1:1 divider?nvr heard bout it.can more detailed bro? and i thk we're really out of topic d.this is air cooling thread pls pm me

try change the System Memory Multiplier.
under it it'll preview the selected memory clock.

if it doesnt work im sorry as i never use this mobo or bios.

rite now im on Abit so the layout and even the naming is different.

yeah i noe bout tht but there's this GMCH strapping with A B C D.does it matter?right nw im using 2.00D,i tried setting it to 2.66 which is the second lowest value but tht would make it 1212mhz

This post has been edited by ZeneticX: Feb 14 2009, 12:54 AM

i think that is the ram slot timing setting or something.........dont really know.

btw whats the ram speed now???

456 x 2.00D

912mhz

so nothing that would set it close to 1066??

maybe there are but it wont be at D

i would try to get answers frm hardware ques.this (G)MCH thg is confusing

hope u can find it.

topic posted.

much thanks to you for guiding me over 2 pages in this thread

This post has been edited by ZeneticX: Feb 14 2009, 01:06 AM

u can repay my good gesture by selling those UD3P to me cheap2.

This post has been edited by hilmiangah: Feb 14 2009, 01:10 AM

noted and will refer to u once i make up my mind

btw decrease vcore to1.275 and started fine

This post has been edited by ZeneticX: Feb 14 2009, 01:14 AM

see.

told u it works.

the ABCD thingy is the MCH latch where you set to be (on top of the multipliers)...im not sure how it calculates...but the ammount of mhz of your ram will be stated when you change it...so...just try them out XD

btw...i think alot of setting are required for the dominator to run optimized...like mine...when out of the box..the timings and speed are all off...even the voltage is not set to what its supposed to be

im not so dare to try out those latches as i've heard tht it will make ur system go unstable if u set it wrongly

yea thats true...well...its a try and error process...took me quite a while to make my system orthos stable...regarding your dominators im not really sure of its capabilities...as for me...i hand picked those old stocks with microns...so i dare take that risk

looking at the current OC capabilities of processors...im feeling kinda left out with my e4300 1.8 already sobs i would be delighted to let it go at RM180

btw why dont u just use those XMP features???

or it doesnt work with an overclocked system.

XMP whats that?....extreme memory profile?...if its that..i didnt use it coz i set everything manually in the bios....i presume it should be better than the auto ones....coz i dont want it to be too slow or too fast...1085mhz with 5-5-5-15 is just nice for me

i dont wanna exceed 2.1v as it would void the warranty (according to corsair site) thats why...and also..mine was put as standard

This post has been edited by Bonchi: Feb 14 2009, 02:14 AM

wil try out those latches 2mr while i google more info bout them.thks for all the hlp here