do u able to go higher fsb?


any other dfi x48 ut/lt user here using quad? i need help

---

Added on December 4, 2008, 10:44 pmfinally get 3.5ghz 10 loops pass on IBT after tuning on the gtl ref
dfi x48 lt is really tricky for quad overclocking
anyone using these board pls share me the gtl ref for quad at 450fsb and higher, thx alot



This post has been edited by hengmy: Dec 4 2008, 10:44 PM

what pl u running? when 450fsb i usually set to 8/9 pl,i not sure is it my psu holding me back when i try to oc to 3.6, it pass IBT few loop then restart

but pl 10 look like to loose
i have tried on pl6 on 3.5ghz, its able to stable as well..
but on 3.6ghz, 450fsb, pl8, i will never boot into window if i dont touch the gtl ref, after i trying to tune the gtl ref for few hours (because i dont know how to determine the correct gtl ref, so i use try and error), it able to boot into window and pass IBT 3-4 loop then restart, i wander is my psu problem? cause it will come out sound after i OC to 3.5ghz onward
anyone know how to determine the gtl ref for this board with a 45nm quad?

oic.
but the gtl can be determine like % right?
the bios do know show the gtl ref in %, but in number, so i would hope someone who know how to convert the cpu vtt with % into the number that need to set in bios.
it is hard for me to try and error from 1-999 for 3 gtl ref

need some opinion, can i flash dfi UT p45 bios into dfi LT X48 mobo?
will it work?

got turbo version?
water block can ask for bryanyeo86