actaully mine is just average i think

those good ones can do better on air

erm...so u got vdroop during load ma?

This post has been edited by tkh_1001: Oct 7 2008, 12:31 AM

erm...which 4gb ram brand are u talking about here ya ?

IMHO 4gb kit (2x2gb kit) not likely to do 4-4-4-12 on 1000mhz..... cos most of them will hit the wall at 9xx on CL4.....

4x1gb can do 1000mhz CL4...but u will need to have very good rams and mobo i think... so far i have only seen mr.cstkl1 did 1000mhz CL4 on 4x1gb config with his godlike team xtreem 800mhz CL3

This post has been edited by tkh_1001: Oct 9 2008, 06:10 PM

my latest try

don tell ppl who is she mar....let ppl enuf edi

LOLZ

then u oso post some screen SHOTS la

aiks.....

i am not rich ler bro

---

Added on

ANYWAYS GUYS.... do u guys have NB n VTT lower reading on smartguardian than value set on bios?


n then, today found out my proc cant boot if i were to set the fsb to 412 - 415....... but then i can boot again at 418

FSB hole?

This post has been edited by tkh_1001: Oct 11 2008, 06:29 PM

i am referring to the hole u are thinking about now

why so serious? let me put a smile on that face lolz

tq for the feedback bro.....

erm who is oscar eh?

btw, from google, macam got ppl say this mobo have fsb hole oso.....

whoopsie..... didnt know all that

my new attempt for 4.1ghz with 8multi....

but have to pump 1.2vtt n 1.24vnb to stable....

n the gtl is

0/2: 0.67
1/3: 0.57
nb: 0.58

other gtl setting wont be able to stable even if i pump more vcore

u la kns donwana teach me

anyways, my mobo cant seem to boot up again at 513fsb this time..... lazy wana find the range n booted up at 519 fsb

ok....finally get to 4.2 liao n shud be my 24/7 i guess...but have to increase quite alot of vcore

this time using 1.25vtt n 1.29vnb

gtl 0/2: 0.67
gtl 1/3: 0.61

nb gtl: 0.58

n here goes the same old drill

hopefully can SMP with this settings tho

the trd i set to 11

cos mine is 4gb ram scare if i put low later it will unstable

nonit u say lo

already tried but cant do trd 9....

erm..try change ram slots?

or maybe run memtesst? lol

huhu....what speed wei?

1:1 ?

aiks...so lousy meh do 4.5ghz only? such a stupid proc man.......


nvmla...i baik hati one... i help u take care of it la

got nothing else to do...so just give my proc a noob try

didnt tweak anything...just simply add nb n vtt lulz

huhu....ever since i use 9800gx2 my nb temp always go above 50 lolz...unless i use a fan to blow it

hmm....i not sure la...but i think my NB temp has got something to do with dual gpu

cos last time when i was using p35 dk also around fifty something

nonit change la....just slap a 60mm silent fan on it.... can chop off 5c iirc lulz

i did..... always use .5 lulz...

just enable n/2 iirc