Just curious, but how far will a X3350 quad go on P35? Mine's running at a pretty safe 3.2GHz, just wondering how much more can it go.
Intel Q9xxx and Xeon 33x0 Family, Show the rest what Intel Quadies can do!
|
|
 Apr 7 2009, 03:09 PM
Return to original view | Post
#1
|
 
Senior Member
990 posts Joined: Sep 2005 From: Bolehland  
|
|
Quote|
|
|
|
|
Apr 12 2009, 01:05 AM
Return to original view | Post
#2
|
|
Senior Member
990 posts Joined: Sep 2005 From: Bolehland
|
Pushing my X3350 C1 on a EP35-DS3.
410FSB, 1.23125V, stable 425FSB, 1.3125V, +0.2V FSB, +0.2V MCH, +0.1V PCI-E. It's crazy, board can boot at 1.25V +0.1V FSB, but took so much extra to make it actually stable. This post has been edited by yimingwuzere: Apr 15 2009, 09:18 PM |
|
|
Apr 30 2009, 09:35 AM
Return to original view | Post
#3
|
|
Senior Member
990 posts Joined: Sep 2005 From: Bolehland
|
QUOTE(blu3skyr4in @ Apr 29 2009, 12:52 PM) argh~~my Q9450 only reach 3.2ghz wit 400x8 fsb~~ Most likely the chipset. P35-DS3L also has same issue.i try to go higher only reach 419x8~420x8 the pc no boot== me using EP43-UD3L and XMS2 2x2gb 800mhz any1 can tell me?is tat P43 chipset limit edi?  My EP35-DS3 and X3350 can hit 425*8, but the power usage is crazy, +0.2 MCH, +0.2FSB, 1.3Vcore. Could go higher but absolutely not worth it. This post has been edited by yimingwuzere: Apr 30 2009, 09:57 AM |
|
|
May 22 2009, 11:09 AM
Return to original view | Post
#4
|
|
Senior Member
990 posts Joined: Sep 2005 From: Bolehland
|
QUOTE(8tvt @ May 21 2009, 12:00 PM) anyone using Q9300? P43? Or low end P35?my cheap mobo limits to 400fsb.. more than that not quite stable.. can't see true proc potential.. |
|
|
Jul 31 2009, 02:09 PM
Return to original view | Post
#5
|
|
Senior Member
990 posts Joined: Sep 2005 From: Bolehland
|
I managed 8*400 on my X3350 C1 using 1.2V vcore (default 1.1875V) and everything else at normal voltages, using a UD3R. Even on a EP35-DS3 I only needed 1.225V vcore, rest all normal. I think you just need higher vcore only.
This post has been edited by yimingwuzere: Jul 31 2009, 02:10 PM |
|
|
Sep 3 2009, 06:04 PM
Return to original view | Post
#6
|
|
Senior Member
990 posts Joined: Sep 2005 From: Bolehland
|
QUOTE(Kriss @ Aug 30 2009, 04:17 PM) Anyone here using DFI P35 Blood iron . . ? vcore is too high.My Q9450 cant get above 440 FSB . Vcore - 1.55 VTT - 1.36 VPLL - 1.55 Vsb - 1.95 Vnb - 1.46 Vclockgen( Wth is this ? ) - 3.55 default. All GTL at 0.67x I get tips from other forum to up my VTT and VNB if i want to get higher clock . But why my board got Vclockgen and Vsb ? What value is optimum ? I think it's a P35 limitation. Most P35 boards have a FSB wall of 450 for quads. |
|
|
Oct 14 2011, 05:28 PM
Return to original view | Post
#7
|
|
Senior Member
990 posts Joined: Sep 2005 From: Bolehland
|
QUOTE(nidzamputra @ Apr 11 2010, 10:54 AM) arrrggghhhh one of my mushkin pair have problem..need to RMA Irony: I just swapped my tracers for mushkins. They tracers weren't the D9G chips though... ...now running 2gb only...  ...and i feel the different @kahjye better you take the bios picture & show to us..maybe we can help you...think running 3ghz with stock HSF no problem...it's still can handle How much do you guys think I can squeeze out from a CCF cooler for 24/7 usage? I managed to go up to 3.8GHz with my proc prime stable but the temps were  |
| Change to: |  0.1251sec
 0.54
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 10:37 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.