Just don't mount the plastic tupperware cup so close to the ceiling that it scrapes.

Tolerances in QC. Metal blade model tend to have looser tolerances. You can check the gram weight stickers on the blades.

Mainly how annoying it is when it bangs into your head.

Not much difference. Less use of electric kettle will be more saving unless you run the fans 24/7 in mamak stall.

Bayu dont waste the money, add few bucks for KDK. Avoid the hassle.

First time getting a fan that cost almost rm700.

Panasonic 60-inch Aura Series 5-Blade Ceiling RM644 after discount. Installation by my friend RM50.

Definitely cover more area then my old Deka fan.

Over my budget. How's the performance?

My house have 4x Vannus Luna and 1x Vannus VC2

1 year in so far all still running smoothly. Wind is strong also usually I only set to speed 3 or 4. 5 if really hot

Definitely covers wider area.

But got to be at least 8/9 which is max speed.

Oh thanks.
What size is your fan? 56 or 60?

VC2 - 52"
Luna - 3x 40", 1x 36"

Oh. You are using smaller size.
If put max too windy right
I afraid smaller size no wind.

Yeah. Even the smaller sizes already very windy when set to speed 4

Those who upgraded from 56" to 60", is there significant difference or just incremental?

Me getting 1x 40" for smaller bedroom.
Since I asked one of the electrical shop salesmen stay at the same building that whether 56" can fit but it will scratch the air conditioner unit 😂 😂
He actually tested it today said can't fit since we plan to fix air conditioner there as well.

Getting 56" for Master Bedroom, 2nd Room, Dining and Living.

You fix 40 inch in 3 bedrooms right? Master bedroom?

Yes all my bedrooms using 40". The smallest room use 36". I feel like 36" is already sufficient depending how big/small is your room

Thanks for the input.
So far no noise issue right?
What happens if max speed 6?
Too windy? 😂 😂 😂

Never expect 40" also windy.
Since I planning which size to use on my sister's house later.
If fix 56inch will scratch the air conditioner unit.
Either 40 inch or 46 inch.
Most likely take 40 inch.
Then bigger rooms using 56 inch.

This post has been edited by FusionXY: Aug 17 2024, 02:53 AM

No major issues no far

My 52" when installed initially it was swaying a bit. Called Alpha technician, they came and did balancing then issue solved already

One of the 40" room fans when turn on will have some clicking sound but just for a while, after the speed increases the noise disappears

You can refer to the installation manual for the minimum required space, from there can determine the ideal size

Hi, saw your recent post about 40" fanis sufficient for most rooms. I am looking for ceiling fans for my new unit and KDK/Panasonic only has 56" and above...

Alpha Vannus series seems to fit my budget. I have 2 rooms at about 100-110 sqft (10ft x 10ft), is 40" fan sufficient or do I need to go 46"?

Alpha recommends to leave a gap of at least 1m from the blade tips to the nearest wall



according to this you should be ok with 40", even 36" is fine

I also might getting 40" fan.
Saw the showroom put EX9/CX10 for the rooms, 40" version since cosa only got 2 sizes which is 56/40

Living and dining not sure what size but is Vannus Luna maple. 40/46 I not sure 😂

can check other series from Alpha like Alkova series but sizes are generally larger and more expensive (alkova is their flagship range i think)