me also.setting dts..quiet.setting auto..pcm 2.0 i think.
so,use red/white cabel..from output lcd go to input HT.
beres.when palying ps3,can use 2 speaker.lcd or HT.

audio ps3 setting use pcm 5.1 (48.1 if not mistaken)

for me..solve ler.

p/s : OIT!,TAHULAH ADE PS3..TP JGNLER KUAT SGT.
ORG NK REHAT KE,ANAK NK TIDO KE..BLABLABLA
( my neighbour yelling to me    )

your HT same like me..difrent model aje.
so far as i know,HT already have function
Decoding Mode (refer manual). i use decode,
PRO LOGIC.if not mistaken,HT have 6-7 way
to decode sound.

my lcd have setting to use audio from it self
speaker or audio system.so,when playing
ps3,i change setting audio lcd.tv speker to
audio system.

when audio system operate,lcd speaker is
quite/silence/SENYAP.

---

Added on August 22, 2008, 5:14 pmyour HT same like me..difrent model aje.
so far as i know,HT already have function
Decoding Mode (refer manual). i use decode,
PRO LOGIC.if not mistaken,HT have 6-7 way
to decode sound.

my lcd have setting to use audio from it self
speaker or audio system.so,when playing
ps3,i change setting audio lcd.tv speker to
audio system.

when audio system operate,lcd speaker is
quite/silence/SENYAP.

Try this,

Video output thru HDMI...connected to your TV....

Audio, output thru optical cable...connected to your Home theater...

PS3 settings put bitstream rather than decode to PCM as only 2 channel of PCM can go over optical.

To hear 5.1 DD or DTS sounds, the home theater needs to be be set to Line in, or AUX in (you get the idea)...

This settings means LCD TV will have no sounds but the sounds coming out of Home theater straight from PS£ optical cable..

Hope this clarifies

There are two common ways to get 5.1 DD or DTS...either thru optical cable or HDMI...

May I know what kind of audio input connector you have at the back of your HT (home theater)?

usualy there are

1. stereo (composit) connector - Red and White round connector...
2. Optical (kinda square with a little round bump)
3. Coaxial (Round - but rarely got behind a HT unless very expensive ones)
4. HDMI (if you have this and don't know how to use it then you might as well give it to me...hehehe)

do you have the model of your HT? maybe I can do a search on the net and advise you properly...

Aside to ravemaster....

my pleasure...but don't thank me yet...try first....hehehe

This is what I got from the website...

AMPLIFIER
S-Master Yes Audio Line IN/OUT (Analogue) 2 / – Audio Line IN/OUT (Optical) 1 / – Audio Line IN/OUT (Coaxial) 1 / – Audio Input (Front, mini) 1 Video Signal IN/OUT (Composite) – / 1 Video Signal IN/OUT (Component) – / 1 Video Signal OUT (HDMI) Yes (1080p) USB 1 Headphone Jack (3.5mm / 6.3 mm) 3.5 mm D.C.A.C (Auto Calibration) Yes Bass Boost Function (Dynamic Bass on RM) Yes Night Mode (Normal/Plus) Normal Portable Audio Enhancer Normal Dolby Pro Logic/Dolby Pro Logic II – / Yes Dolby Digital Yes DTS Yes Multi Stereo (Link) Yes A/V Sync (Lip Sync) Yes Speaker Formation Yes (low) Timer (REC/PLAY/SLEEP) Yes (– / – / Yes) S-AIR Ready Yes BRAVIA Sync Yes DIGITAL MEDIA PORT

See the bold thingy...that means you do have optical in AND out for your HT....so you should but an optical cable and connect it directly from your ps3 to your HT...

push the function button on the remote till you hear the sound from the ps3....(I think it corresponds to [TV])

attached is the picture of the optical port ffrom the back view. I've highlighted the port

AAAALLLLLLMMMMMAAAAKKKKKK....

Nemind noobies blunder can be excused..Muahahaha...Orait..lemme download the manual and check first...see you in 5 mins

Sorry to say there's absolutely no way to send 5.1 DD or DTS sounds from PS3 to your HT. it can decode DD or DTS from DVD Movies but not from another device...

If the store that you bought this have return policy...got and return it and go buy another model that have optical input....Sorry marksman..this time your marked shot missed the target by a long one...

Nope...DVI is for video only...

I'm really sorry to tell you this but it's the truth...Unless it's something that I don't know of..but I'm 100% sure there's nothing you can do....to output 5.1 DD or DTS to this HT...

In fact I'm very much shocked SONY sell this model since my 5 years old SONY DAV-S500 do have optical in and can decode both DD and DTS.

If the kedai you bought this from can accept trade in...go and replace it with another model ... or just sell it thru the forums and get another model...but this time do research first....

Sorry if I sound rude or make you feel bad or anything like that...but I'm telling you the truth and even though I'm a big fan of SONY...I'm now pretty much ANGRY at SONY for selling this model and it's for 1799 summore...

Try check with the shop if there's a return policy..

The converter that you show...only works with digital coaxial and optical...both of which your model don't have...and the usage if you only have one of the two connectors (Coax and/or optical)....So again sorry as as far as I know..there's no way for you to hook up your ps3 and the HT and get 5.1 DD or DTS...

You need to either have Coax (then u need the device above) or optical input or HDMI...of which all three you don't have...

nOOb question here...

since HDMI include audio and video signal , if i wanna to connet to my LCD tv , i just need to plug-in HDMI cable from PS3 to LCD tv is it? just that? or i need some extra cables?

cause from what i know...LCD tv had AV sound output rite? so i just connect ps3 HDMI to LCD HDMI port 1...then use AV cable connect to sound output ( from LCD tv )  then connect to external speakers which have AV input....

first of all Malaysia PS3 80GB set > CECHK06 ; ur PS3 CECHH06 not Malaysia set ( its 100% Singapore Set )

^nowadays, connecting PS3 to patch servers is super slow. not sure why, before it was OK.

anyway, go to first page, search for "patch" or "proxy" for the d/load demo/patch using PC proxy method - saves alot of time.

its works the same if the patch is in PKG format. (Note: not all games have patch system in PKG format)

1.install proxy program and start it
2.on the PS3, set internet connections to connect to proxy
3.boot up the game, and wait for patch screen, wait a few seconds, then cancel, go play another game while waiting
4.on the proxy program [Log], u'll then see the link of the patch.pkg
5.d/load the patch.pkg using PC
6.when finish, just link it up in the proxy program and reboot the game

if all steps are done right, the game will d/load and install the patch very fast.

er... only 1 ethernet port modem? i'm sorry then, not sure how to setup for your case.

i use router and the PC and PS3 is close by so easy to use the proxy method.