well as for my rig's cable management, please help me T_T

http://lh5.ggpht.com/_oaD_dxJFZmw/SVuTlJbB...h/PC3008532.jpg

This is the picture of my cable management from my blog.
please help me, i am using some idiotic casing.

My blog is www.yapkoki.blogspot.com

This is the picture of my idiotic casing that i was going to change.... any recommendation??
http://yapkoki.blogspot.com/2008/12/last-p...tes-fixing.html

P/S : I live in Ipoh so the availability is very tight, mostly is CoolerMaster stuffs only.

EDIT: Mine is the red and black one

This post has been edited by Koki: Jan 29 2009, 09:02 PM

my cpu cooler's heat sink is big and not enough place to put the side panel fan inside T_T

i wanna the change casing to a casing that is nice looking, good performance and cheap??

yeh i thought about getting a CM 690 but how much does it costs??
can give the price for it at KL and ipoh??


http://yapkoki.blogspot.com/2009/01/re-wir...internally.html

So that is my problem, i re-wired already and thats the best i can do

This post has been edited by Koki: Jan 30 2009, 07:30 PM

aiyo i still noob in LYN T_T
how do i upload pics here anyway?

I dont understand, where can i get the psu sleeving kit for my cooler master psu? it has so many cables.

and how can i connect straight by the motherboard?

Neat!!!
but any places in ipoh selling it??

i dont have the cable =(
is the modding kit available @ lowyat?
coz mostly i visit KL got go lowyat =D

i buy all pariah fan here la, no good brand one all china

EDIT : sorry x2 post, thx to streamyx

This post has been edited by Koki: Jan 31 2009, 05:10 PM

aiya my casing dont even have the opening at the mobo tray there T_T

my casing come with the bundle, wanna change to CM 690 liao

maybe around 2 or 3 days later guar
dono la my bro fetch one, his girlfriend stay near PC Depot Ipoh branch there
so have to become lamp post to get the casing

its the best if the 24 pins come behind the mobo tray to the mobo, and then sata, roll it like a spring and connect

well i think the CM690 will have great cable management, since it has clips and hole beside the psu there for the wires~
how long is the length of mobo tray and the side panel cover?? coz i thought of hiding all wires behind mobo

how come the Elite series is so bad for cable management??

@cyew86
lol tape ur 4pin mobo connector to the back there or just stick it on the top
as for the 24 pin, maybe tape on top, have a few turns and connect??

@sopen2003
i'm using the M3A78-EM
dual screen with only integrated graphics and doing great =D

u know i tried to tape up my IDE cables after folding, but it failed
any other type of IDE cables?
it sucks when its so hard =(

EDIT : @sopen2003

no la this mobo http://www.asus.com/products.aspx?l1=3&l2=...252&modelmenu=1 , but the place for the 24 pins, 4pins and others are same la
i chose that CM 690 because psu at bottom la
psu on top not much efficiency
at bottom of course better la

This post has been edited by Koki: Feb 1 2009, 06:13 PM

what i meant was the wattage of the psu...
more efficiency = more power-saving, increase in performance *a bit only*
in other words more efficiency = less heat dissipated only

it is the place u put on bro
if u put on top means u are bringing most heat from the whole case to the psu as an exhaust
but putting at the bottom means direct in and out through the psu, which means all cool air instead of hot air
also the efficiency will increase

i learn from science XD
i remember seeing some website about psu efficiency, i think its Cooler Master, it shows AC current going in psu, and 100W dissipate and remaining one change to DC and go in ur comp

well btm seriously does help
in science it says energy cant be produced or destroyed, so in this one it changes the psu power to heat only la

P/S : Sry got geeking here T_T

EDIT : Read this, i just relate it my concept with it

http://en.wikipedia.org/wiki/Computer_powe...ergy_efficiency


This post has been edited by Koki: Feb 2 2009, 12:55 AM

where u get all those LED fans?? how much each?? what color???

the CFM, rpm and the dbA how??