o, means i can use epoxy for my rize's base also lo

use bondite... hardware and cheap... but its good...

The one that I got is Devcon. Got it for RM18
There are plenty of other brands at the hardware shop. Price depends on the type and strength of the epoxy.
Mine is something like 2 in 1 where the resin and hardener are together in one syringe.

wait what, I thought you're supposed to mix them only when you're using them?

its in 2 separate tubes but in a giant syringe if you get what I mean.

but the syringe is pointless, right? since you'll be using just one tiny drop of it for the peg.

Yeah. You have to mix the thing somewhere

---

Added on October 2, 2008, 2:11 pmBtw, is using a drill the only way of removing the peg out?

This post has been edited by raptor_cZn: Oct 2 2008, 02:11 PM

You can try gouging it out slowly with your fingernails. That's what I did (there's like, a very tiny 0.5mm peg sticking out of the leg for my case)

Seems to take forever by doing that ^^

Took me just a few minutes =p

Mine doesn't seem to budge. I'll try sticking the peg to the base with it still in the leg. Hopefully, when the peg is stuck to the base, there shouldn't be any problem taking it out then.

won't you stick the legs permanantly to the base in the process? D:

Nah. I only applied on the small portion of the peg. Anyways the peg is jutting out a bit. Not completely inserted to the leg. Hopefully it should work =)

My first yoko figure



some dispute between the figures



This post has been edited by Wolf516: Oct 2 2008, 08:32 PM

My next wishlist Tigger Heart Nendoroid !!!

must be very expansive...

if EG punya interfere... sure kallen go...

go get it and show us here...

enjoy spending RM360+ for a PS2 game with louzy gimmicks.

i totally agree....

after learning from figma saber lily, they are going milk this game + figure franchise dry!! anyway PVC prices are going off the roof...

but still so many on my wishlist that will always remain as a distant wish just like a purple hakama 1/6 kanu