Oct 20 2008, 02:23 PM
QUOTE(tech3910 @ Oct 20 2008, 01:06 PM)
try dun set max stress.
dunno y in my xp, if i set anything > 2200 memory, error will pop out.
i think ur processor will fry 1st.......
i think my processor already done 100 or close to 100 loops, but in different occasion not @ 1 shot.
4gb memory le, teks quite sum time 2 to 1 loop.
run ibt in diagnostic mode dude..dunno y in my xp, if i set anything > 2200 memory, error will pop out.
i think ur processor will fry 1st.......
i think my processor already done 100 or close to 100 loops, but in different occasion not @ 1 shot.
4gb memory le, teks quite sum time 2 to 1 loop.
also for those who are having ibt fail... on max mem..
ure background programs are interfering
go to run in start
type msconfig.
select diagnostic mode.. apply.. press ok
and restart ure comp..
and test away...
so far tested up to 200 loops on 4gb.. took around 16 hours.
i find this is the basic
mem instability ... u will find in 15 loops... not enough vdimm.. just a rough initial purposes.
vcore instability .... u will find in 20 loops.. not enough vcore
wrong gtl.. u will find in 30-40 loops
nb instability.... IBT is not very good at this but for initial perpuposes.. 10 loops
mem subtiming instability ... 20-30 loops...
this is based on 4gb..
if ure going to do 2gb.. times 2 of the loops above... roughly...
usually if u pass 50 loops.. after that really no difference...
if all the errors has been corrected properly before
vtt voltage is easy.. if it boots into windows.. and no issue ( try running ccleaner gutmann 35 pass) then its the correct vtt..
cheers ppl.
This post has been edited by cstkl1: Oct 20 2008, 02:24 PM
Quote
0.2825sec
0.87
7 queries
GZIP Disabled