Hi all,
noobs here.
Here's my tries on IBT using X3320 & P45-DS3 mobo.

@3GHZ (400x7.5)
20 tests passed with flying colours.



@3.375 (450x7.5)
5 tests passed.



but,
20 tests failed. all the norm value not equal.


Seems to hit the FSB wall coz when i increase fsb to 455, BSOD when test with IBT. 460 can't even boot.

All settings beside FSB is auto, DRAM timing, DRAM divider, Vcore auto.
i'm not sure becoz of the mobo or the RAM. I'm using OCZ DDR2 6400 SLI 2 GB kit.

Will it be different if i use DDR2 8500 RAM?
any specific settings that i need to change?

I want to use at least 3.5GHz though @3GHz is happy already.

same case here...... i can OCCT pass 1 hours but only passes one loop of IBT....

if u are not doing F@H, OCCT 1 hour cant fail u on normal usage...

cos imho ibt very stressful.... n there is no need to torture ur proc to that level if absolute rock solid stability is not ur need......

then it shud be something else causing the problem instead of the proc

n ur OS got problem rite? 

I set my shutdown temps in BIOS as 65C...so when the first time I ran this test, it totally shut my cpu off...the question is, I already passed orthos and occt for 8 hours...should I run this test juz to be sure?

I cannot run this IBT...it will give an error message...