syahirax, ibt is the best, why not give it a try ... I think, a few minute stressing with higher temperature is better than stressing with lower temperature but take a hours or days ... what u guyz think?

quite true..let the proc keep stressing

few minutes stress test with high temperature for me

i will put that in my mind.Thanks a lot.

Okay ive tried with 1/2 stressing,the temp is around 73C and i passed 5 loops.Now running at 10 loops.I cant run at maximum stress because the program will immediately crash.is it because im using windows 32 bit?(as im using 4 gb kit)

This post has been edited by syahirax: Oct 15 2008, 01:27 AM

try get the linX.its the gui version of this program.

thanks,will give it a try

wah..got gui version sumore ad ar?

ive tried and it works. and nice user interface too

How many runs to you guys usually use to verify it to be CPU stable?

And memory used?

well i use 4gb ram on a 32bit os.......

i use 1860mb is the max i can set.more and i cant run the program.
and i always use 10 loop.

me too.i tried using maximum stress(full memory) but normally the program will crash.So basically i use half memory,and 8-10 loops which is okay i suppose.

I can set about 2048, a bit more actually before the program actually tells me there isn't enough memory. Different story on my x64 though.

Manage to run 400x9 on 1.225v for 10 runs. But the temperature was showing 73 max on both cores at tjmax=100. ._. Seems like I'll need the CCF soon.

ive tried runing at 3.7 1.435 vcore and the temp jumps up until 82C.

even with a lapped ultra 120

yes,lapped ultra and lapped processor.i guess my lapping job is worse.(althought slightly minimal difference like 1C-2C)

crazy temp achieved..haha

Different la bro, yours is C2Q, mine's a C2D much easier to OC. Still on stock fans ~_~. 2 cores = lesser than 4 cores producing heat ma.

lol..c2q 6600 really hot...hot and sexy

more like hot and spicy i guess.lol

normal la high temp for Quad...
mine 3.19 pun can up to 51c-55c...
if higher sure can reach ur temp...