I am going to 1st 1000 km service this Friday.
What shud i expect?
From what u guys experience..
I think i will decide between DJ/Mutiara Damansara SC.
Which i better?

1. The indicator is there, but got no sensor attached= no use 
2. There is, white light. 

Went for my 1st service on last Friday.
Reached Mutiara Damansara at 8.30am- walk in...told me fully booked..come next morning at 6.30 am..crazy...
Then realised CPS thread got something bout new SC in DJ. Drop in to starbuck at curve.Start up WIFI via laptop (I am a Software Engineer btw..laptop like my second ehem). Go back to CPS V1 thread..found it.Drive there (DJ Petronas Station). I am 1st customer 
Good Service! Nice mechanic, chatted alot but the car. He suggested want more power he will increase my idle enginee *something* to 900 instead of default 850.
But FC also tinggi la.
Get to see what ever he doing to my car.
Everything done less than 1 hour 
RM 100.69 - change engine oil, windscreen washer, oil filter

Then,steer to Atria - send my baby to polish with sealant. RM 128.
Now..every morning i smile when i see my car shining. Even mom and gf are impressed.

Damansara Jaya 2 Petronas Station.
Erm..On the LDP to Kelana Jaya.Take the left lane until you see a board sign to Damansara Jaya (its a U-turn)
Make the U-turn. You will see the Petronas station after BHP.
Its somewhere around Atria but not the petronas station near KDU

I totally agree on this part, even with AT car also can arhieve this
Auto leveling? Should be a manual adjusting, right? Why he said auto?
Improved NVH? Can someone comment on this part?   I never drove any waja campro, except old waja mitsu. From my xp, feels like no difference
Somehow, I agree about aircond compressor kick in. Care to comment, other CPS owner?
Not sure about this, coz I drive an AT car.   But, the car has power in every range of speed.
My car cruise 110km/h at 2900rpm. So, it means the engine is good  

My aircond are always at the minimum setting except when I wanna cooldown the cabin fast. Less interruption by the compressor that way. 

You can try to replced it with a smaller power compressor, but will lose the cooling performance.

Or you can try adding those Voltage Stabilizer to stabilized the voltage when the compressor kicks in.

I'm driving Gen2...hhmmmm, this clicking sound, i havent notice anything..while driving over 130km/h, all my concentration 100% on the road ahead..
Ok, next time i'll pay attention for that sound..maybe it is CPS kicking in...

but i think my Gen2 generates so much wind noise (recently i put door visor)...those little little sound sudah tenggelam...

Just went to sc again.. Still no sign getting the gasket..   Talk to one of waja cps owner. He said that his car got leaking to.. Not from the rocker cover, but area that have glue seal, where engine block attach to head. Just minor leak...

It is true that, in waja cps manual, the recommended engine oil grade is 10w30 ..??   The guy told me, owner of that waja... But the sc foreman don't believe it... But he still wanna use that oil grade. Then the foreman has to use the 3L petronas syntium 800 10w30 + another 1L as it came in 3L bottle.. 

Maybe those leakage is the engine oil sipped through the gap because its too 'thin'?

I thought CPS cannot use fully synthetic because the viscosity is too thin (according to the manual must be at least 10w30 if not mistaken). 

Why when we rev the engine pass 2.7-2.9k rpm during moving, we can felt the vibration BUT cannot feel it  when the car is stationary?

---

Added on October 14, 2008, 9:06 pmGuys, now got "eek" sound coming from my brake pedal. when I release it.   What to do?

Syed Zainal also told the club members that Proton was working on a 1.6-litre Campro turbo engine that is as powerful as a standard two-litre engine.

"The engine will be available in 2010," he remarked.

Proton owners, Syed Zainal said, can also expect a smoother engine and fuel performance with the introduction of a new TCU (transmission control unit) to replace the current version by end of the month.

"It takes 15 minutes to install the new TCU II in the engine and this would only cost about RM450," he added.