i got it first before all of you.....
you get what i mean??

understood
so you blow it first?

Blow your head la.. ah pek.
it sent to my office doorstep, so i got it first

walau...beh tahan
that means i will get it fast too

This post has been edited by ongbs: Aug 7 2008, 10:05 AM

Anyone have received the T-amp and started playing with it?
Mine probably on monday. "No deliveries on Saturday, we'll deliver it on monday" is the answer I got from the courier company. Was planning to enjoy some good T-amp sounds this weekend!

you may ask xtorm, he just tested it last night

i got no speaker box for my speaker cos those are for my cars which i took out when i go for performance, but i think i gona put them back, with a simple 1st order crossover they are sounding nice and actualy quite loud too, since they are so light, gona put it in my car gona run full active in it

lu taklak cukup leng cai lah...I got mine today

Update:
Just tested the T-Amp.

Sound quality quite good.
Normal listening, it just consumes around 100mA at 12V
No need heatsink as the IC won't be too hot

This post has been edited by ongbs: Aug 9 2008, 10:19 PM

Picture please.

walau what pic?
The T-amp pic is in 1st page what?

or you mean my pic huh?
Sorry, I will only give to gals

This post has been edited by ongbs: Aug 9 2008, 11:22 PM

I mean the pictures of your complete T-Amp built. Case, connectors and etc.

ok guys.
what kind of power supplies are you guys using?

I see around 4 ways to power this little babies
1. Battery-SLA ( Sealed Lead Acid)
2. Unregulated 12V power supply
3. Regulated 12V power supply
4. Switched Mode Power Supply

What I heard, the switched mode suits the T-amp very well!

I may go for switched mode as I have a spare ripped from my old DVD player that I can use..

haha...jk only bro

Well, I haven't decide where to use this amp so just temp test it out.

Only 9 wires going into this amp, no casing, just sit on the floor

---

Added on August 10, 2008, 4:09 pm1,3 and 4 can be used.
For testing purpose sure SLA is the best coz it is pure DC

I tested the current draw of this amp, driving my Yamaha floor standing speaker, 2x8" woofer, 1x8" Mid + 1 tweeter per channel (!!!)
Surprisingly it drives my FS speakers well, AVG current draw only around 250mA!

A 12V, 6A SLA can last you min 24hrs blasting

This post has been edited by ongbs: Aug 10 2008, 04:30 PM

Excellent job bro!
Yup, I am thinking of getting an SLA too as an option.. enough juice to improve the bass and transients. That is what I have read anyway
250mA? Thats pretty low ya. 500mA minimum I would build for the PSU. 2A would be just about right
Did any of you guys change the input caps?
Anybody intend to do any mods?

So bro ongbs, whats your initial impression of the sound? Does it improves with additional burn in?


This post has been edited by jazzy939: Aug 10 2008, 05:05 PM

found some juicy m-cap 1uf, 2.2uf and 3.9uf at home!!! 1 cap alone is more expensive then the amp me think haha not too sure, got 2 elna 1000uf for audio cap going to power supply

other mods will be putting in better gain resistors, tht's later part.

those are the 3 main item to be moded to better quality, 1 last item will be the coil, but its hard to find aircore

haven really listen to the sound yet, and no casing yet too too eager to try the sound, test on speaker driver without box sound good with ape file, mp3 file so so only, this amp are too simple tht it relly heavily on inputs i think.

this amp gona go into my car as i rent room so no place for speaker... just pickup my 3 way electronic crosover with BB chip all round

sugested burn in is 100hours.

will start a thread later when im at my rented place, gona do the cheapo casing tonite with all the soldering

It's great that you have a head start!
Yes I have read about putting good caps at the power supply..
The aircore coil although it is hard, but it can be 'DIY'ed ..

Too bad,I can't do anything as mine has not arrived yet. If I knew the darn courier that you're gonna use make no deliveries on saturdays, might as well I COD.
BTW xtorm, please don't use that company anymore... poslaju would be better. They work everyday of the week.


This post has been edited by jazzy939: Aug 10 2008, 06:15 PM

haih...

the company i use for klang valley is the more expensive 1

guess better use the cheap 1 then

---

Added on August 11, 2008, 12:11 pmhey bro
some simple photo up at audiophile section
more to come

---

Added on August 12, 2008, 5:16 pmhi any 1 wan to order?

i got 1 order in hand, hoping to get total 4 to get it shipped

This post has been edited by xtorm: Aug 12 2008, 05:16 PM

hi any 1 wan to order?

i got 1 order in hand, hoping to get total 4 to get it shipped

bro..interested here...

Although I got no photos, I really recommend this T-Amp (look at its price), even better sound quality with little mod