When using 4870 gpu with mobo pcie 1.1,is there a lot different compare using mobo with pcie2.0
AMD/ATi HD 4000 Series Discussion V3, Thread stays on V3 till October.Read 1st
AMD/ATi HD 4000 Series Discussion V3, Thread stays on V3 till October.Read 1st
|
|
Jul 20 2008, 10:41 PM
Return to original view | Post
#1
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
When using 4870 gpu with mobo pcie 1.1,is there a lot different compare using mobo with pcie2.0
|
|
|
|
|
|
Jul 20 2008, 10:57 PM
Return to original view | Post
#2
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
QUOTE(owikh84 @ Jul 20 2008, 10:52 PM) PCIE 2.0 doubles the gigatransfer per second of PCI 1.1 from 2.5GT/s to 5GT/s so performance wise 2.0 is 2x greater than 1.1 Take for example same setting but with pcie2.0 compare to pcie1.1 say bench mark is there a lot different, secondly say fps is it quiet significant.Iirc PCIe2.0 operates at 200MHz vs. PCIe1.x which operates at 100MHz. |
|
|
Jul 21 2008, 04:35 PM
Return to original view | Post
#3
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
Hi, my HD4870 idle at 80-81c and full load at 87-88c it seem very hot , moreover i did put a 12cm fan blowing in front and a blower sucking out air n still got that high temp. Any ideal to let the temp go lower.
|
|
|
Jul 21 2008, 07:19 PM
Return to original view | Post
#4
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
Hi, just as instructed by our forunner to increase the fan speed from original 27% to 40%, the result is really significant from idel 80-81 down to 55-56c n full load 87-88c down to 74-75c only but noise is still ok not loud but some air blowing noise. thanks guys.In fact better temp than my previous 8800GT when full load around 80-82c fan speed around 55%
This post has been edited by Dickong: Jul 21 2008, 07:21 PM |
|
|
Jul 25 2008, 11:44 AM
Return to original view | Post
#5
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
I am using 8.7 driver but the riva tuner doesnt work with the driver .
|
|
|
Jul 27 2008, 10:44 AM
Return to original view | Post
#6
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
Wonder if anything i left in my driver setting, becos my AA can only set until 8x AA for most of the games compare to my previous Nvidia GC it can set until 16x AA. Any commend for the setting.
|
|
|
|
|
|
Jul 27 2008, 11:56 AM
Return to original view | Post
#7
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
|
|
|
Jul 27 2008, 12:19 PM
Return to original view | Post
#8
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
QUOTE(ben3003 @ Jul 27 2008, 11:58 AM) yes, teh maximum is 8x, edge detect is like making it looks like 24x. Mean u only got 8x to select, but i think u off the one in COH and use the one on ATI CCC. If it wont works, maybe COH are using the different method on dealing with AA same as GRID where u cant set them at CCC. Will try again later, anyway ever since i start playing with GC from NV 4400 to 8800 this is my first ATI GC thats why i am a bit blur regarding the setting. I still think i will be getting the setting of the NV from my present HD4870. |
|
|
Jul 27 2008, 02:14 PM
Return to original view | Post
#9
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
QUOTE(zhen^wei @ Jul 27 2008, 01:19 PM) wei. not advertisement la.lol I oc to 790/1100 full load with original cooler only 78c, idle at 56c, where you got the info, you dont try this card you dont know how to play with it, thats what you heard, u must be NV dealer, trying to sabotage ATI. I use to be Nv card user only until recently when i change to ati i still feel ati n nv got their good n bad.i heard that 4870 + thermaltake duoorb still reach 90C in load..damn crazy DDR5 so hot one meh ? |
|
|
Jul 27 2008, 06:18 PM
Return to original view | Post
#10
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
QUOTE(Proclaimer @ Jul 27 2008, 05:59 PM) Fan speed at 40% is good enough for my 4870.. Idle at around 55c and load around 60c-65c.. OC at 780/1080.. Myself having the same fan speed setting but oc 790/1100 , temp slightly more than your idle 56c, load 76-77c, been using for 1 week for that setting n stable n fine.Fan speed at 50% u can hear the noise d.. But still acceptable.. After that is juz annoying... Loving every bit of it.. |
|
|
Aug 3 2008, 04:06 PM
Return to original view | Post
#11
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
Wonder any of u guys notice when change to new driver 8.7 the fan speed cant be change . Any ideal why.
|
|
|
Aug 8 2008, 02:45 PM
Return to original view | Post
#12
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
Hi, wonder did you all have this problem, my gpu-z show different temp on temp1/temp2/temp3. Temp 1 at 54c, temp 2 at 63c, temp 3 at 59c, why like that. my fan setting at 45% oc to 790/1000
This post has been edited by Dickong: Aug 8 2008, 03:53 PM |
|
|
Aug 20 2008, 06:39 PM
Return to original view | Post
#13
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
|
|
|
|
|
|
Aug 21 2008, 04:18 PM
Return to original view | Post
#14
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
QUOTE(ben3003 @ Aug 21 2008, 04:10 PM) 8.8 cannot oc over 700mhz for core, and cannot tweak bios Vmod. BUt got improve in vantage, i think this is the stablized 8.7beta, last time my 8.7beta vantage score was like 500-600 more than my normal 8.7. Using 8.8 now n vantage score extra 500, but i am using Sapphire 4870 on vista 64 |
|
|
Aug 22 2008, 09:23 PM
Return to original view | Post
#15
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
|
|
|
Sep 2 2008, 04:40 PM
Return to original view | Post
#16
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
|
|
|
Sep 3 2008, 09:48 AM
Return to original view | Post
#17
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
|
|
|
Sep 4 2008, 09:36 AM
Return to original view | Post
#18
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
Hey guys, just for sharing purpose, i am getting 3d vantage point of 9991, is it ok . My oc gpu 865/1170 anything above that have to add pcie voltage on the bios, my spec on the sign. Just to remember earlier i said when using RT 2.10 my 3d jerk or they call it pause has been solve simply becos i on the sensor for temp,speed n so on.
This post has been edited by Dickong: Sep 4 2008, 09:37 AM |
|
|
Sep 20 2008, 06:08 PM
Return to original view | Post
#19
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
Hi, i just install cat.8.9 but every game frame become slower n sluggish but benchmark for vantage improve by 200+ points, so decided to go back to cat. 8.8 but when install 8.8 the window cant detect the driver saying no ati driver, what the heck, dont tellme we cant backward the driver, thing i have done, uninstall many times still unsuccessful but when i install back cat. 8.9 it works but gamng still sluggush, any solution guys. TQ
|
|
|
Sep 20 2008, 07:07 PM
Return to original view | Post
#20
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Jan 2003 |
QUOTE(tech3910 @ Sep 20 2008, 06:27 PM) i tested wit 8.9 Normally i will unistall the old driver then install the new driver but this time as stated earlier it works fine on benchmark but not on games, this is kind of strange to me or rather first time i come across, anyway i manage to get back to cat. 8.8 by installing cat 8.7 then follow by cat. 8.8 everything works fine on game n on benchmark now, again i am rather curious why cat. 8.9 doesnt seems to be friendly with my gaming but good on benchmark.wat i c is improvement in fps in games. also, it is best 2 uninstall the current driver & restart windows 1st b4 installing new driver. This post has been edited by Dickong: Sep 20 2008, 07:08 PM |
|
Topic ClosedOptions
|
| Change to: | 0.0394sec
0.69
7 queries
GZIP Disabled
Time is now: 14th December 2025 - 09:15 PM |