This post has been edited by yamakashi: Aug 14 2008, 03:11 PM
AMD® Socket-AM2&AM2+ Overclocking Thread V9, ~The Art Of OverClocking Continue~
|
|
 Aug 14 2008, 03:08 PM
Return to original view | Post
#1
|
 
Junior Member
28 posts Joined: Jul 2005  
|
Hey guys, I'm new to this OC scene and it will be great if all of you can enlighten me so that I can push my phenom higher. Is this the optimum that my phenom can go? as I was trying to push the bus speed more than 240 but it just won't boot. I'm using DFI LP DK 790FX board.
This post has been edited by yamakashi: Aug 14 2008, 03:11 PM |
Quote|
|
|
|
|
Aug 14 2008, 03:38 PM
Return to original view | Post
#2
|
|
Junior Member
28 posts Joined: Jul 2005
|
No, did not tweak the NB and HT multiplier. I was hoping to push it at least 2.8 but was stuck at 2.5.
|
|
|
Aug 14 2008, 06:35 PM
Return to original view | Post
#3
|
|
Junior Member
28 posts Joined: Jul 2005
|
QUOTE(cyloh @ Aug 14 2008, 03:53 PM) bump the HT and NB multi to reach at least 1600mhz or 1800mhz. Increase the HT and NB multi so that the bus speed can be push some more? Will try it. Thanks. |
|
|
Aug 14 2008, 10:37 PM
Return to original view | Post
#4
|
|
Junior Member
28 posts Joined: Jul 2005
|
Hey guys, I manage to increase the bus speed to 250 after i bump up the HT and NB multi. When I test this settings with Prime95 for 5 mins it is ok but once I increase the bus speed to 252 while running Prime95, the PC hang or just restart itself. So I try to increase the core voltage and RAM voltage but it is the same. Any suggestions?
This post has been edited by yamakashi: Aug 14 2008, 10:42 PM |
|
|
Aug 14 2008, 11:11 PM
Return to original view | Post
#5
|
|
Junior Member
28 posts Joined: Jul 2005
|
Here is the stable settings b4 I hit 252.
 |
|
|
Aug 15 2008, 12:03 AM
Return to original view | Post
#6
|
|
Junior Member
28 posts Joined: Jul 2005
|
QUOTE(ah_khoo @ Aug 14 2008, 11:50 PM) can't see d ss mate... Are you sure? Coz my PC can see. Use THIS link. @AMDAthlon My PC spec is AMD Phenom 8450 under Sunbeamtech Core-Contact Freezer, DFI LP DK 790FX, 2x2GB Crucial Ballistix Tracer DDR2 PC2-6400 800MHz, Gigabyte Odin Pro 800W, 2xATI 3850 CF mode. This post has been edited by yamakashi: Aug 15 2008, 12:08 AM |
|
|
|
|
|
Aug 15 2008, 08:23 AM
Return to original view | Post
#7
|
|
Junior Member
28 posts Joined: Jul 2005
|
QUOTE(cyloh @ Aug 15 2008, 07:55 AM) Do bump up ur HT link and NB 1 more level. So u can do some maths... plus the oc' keep your HTlink and NB around 1800 range. Not sure about 790FX.. but i think ur board also would handle HT/NB at 2000mhz no issue. The RAM now running at 2.1v. Tried 2.2v but still hang when stressing. Will try to bump the HT and NB 1 more level and change RAM divider. Thanks cyloh edit: saw ur screenshot again. ur rams are running 1000mhz. whats the volts u giving them? any sifu here know if his rams can run that high? For now maybe u should change ram divider to lower the speed.  |
|
|
Aug 19 2008, 12:05 AM
Return to original view | Post
#8
|
|
Junior Member
28 posts Joined: Jul 2005
|
My 1st database entry
8450 X3 B3 | yamakashi | DFI LanParty DK 790FX | Crucial Ballistix Tracer | 1098Mhz | 5-5-5-15-21 | Sunbeamtech Core-Contact Freezer 
27.062 | yamakashi | 2884Mhz (274.7 x 10.5) | DFI LanParty DK 790FX | 2x2GB Crucial Ballistix Tracer | 1098Mhz @ 5-5-5-15-21| Sunbeamtech Core-Contact Freezer This post has been edited by yamakashi: Aug 19 2008, 01:22 AM |
|
|
Aug 19 2008, 01:22 AM
Return to original view | Post
#9
|
|
Junior Member
28 posts Joined: Jul 2005
|
QUOTE(cyloh @ Aug 19 2008, 01:16 AM) Bro, can't see the screens, 404 error. Fixed. Sorry about that. Do tell me if it is ok or not.Use the normal attachment instead of a imagehost? |
|
|
Aug 19 2008, 01:28 AM
Return to original view | Post
#10
|
|
Junior Member
28 posts Joined: Jul 2005
|
Nope
 Run Prime95 and it give me error immediately. I thought can break through 3.0Ghz. Any advice? |
|
|
Aug 19 2008, 01:43 AM
Return to original view | Post
#11
|
|
Junior Member
28 posts Joined: Jul 2005
|
QUOTE(cyloh @ Aug 19 2008, 01:39 AM) Hmm Orite, will test it. If proc die, I will go for X4 instead  Not quite sure here, how about trying to get both ur HT Link and NB to run pass 1800mhz. I noticed ur HT link speed is always a notch below the NB.. how come bro? Try to keep them both in sync and see if the situation improves. For ur proc I kinda have a feeling that 3~3.1ghz is possible. Well, since u have a good HSF, try 1.425v  proc die not my fault ya  Maybe pump somemore nb/sb volts too.  |
|
|
Aug 20 2008, 11:00 AM
Return to original view | Post
#12
|
|
Junior Member
28 posts Joined: Jul 2005
|
QUOTE(adib1992 @ Aug 20 2008, 10:59 AM) RAM:Mushkin Enhanced Basic 667MHz@729MHz probably is the cpu multiplier Timing:5-5-5-15-2T vCore:Stock vCore HTT:1215MHz what do u mean by mul?? |
|
Topic ClosedOptions
|
| Change to: |  0.0382sec
 0.67
 7 queries
 GZIP Disabled
Time is now: 10th December 2025 - 04:33 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.