otherwise theres enkei tuning (original taiwan) and advanti which imo are also pretty decent...

can look for oz racing rims ultralegera etc/japanese rim like enkei gtc01/rs05rr/gtf01/rpf1 price range somewhere around rm 3xxx-4xxx

i ask for quotation around shop in shah alam/klang.

Guys and sifus,

I am thinking of buying this rims : 18" Taiwan Rims (SSR alike), 18x8.0J (VIA 4x100 500kg/5x100 520kg)

May I know if its good? 2nd hand item..

where you found 2k for the konig rim?

yeah, so many replicas out there, some are eye-catching 

Thanks for the tip.. love enkei design but have to see how deep is my wallet..  if not have to go like advanti

Enkei Tuning from Taiwan is actually pretty affordable. But anyway Advanti is also about equally good, especially the Storm series because those are the lightweight ones..

And if i may ask.. where is their authorized outlet?

been looking around at kingofrims

seems like my choice is either a 17 inch enkei original rims cost ard 2.4k

or a advanti taiwan rims cost ard 1.4k

any advise between ori jap rims and taiwan rims?

a bit skeptical on the taiwan rims as i did some research, seems like quite easy to get bend or dented. but price diff is ard 1k. is it worth it to top up the additional 1k

varro flow form rims very affordable at rm2xxx almost same with advanti original rim price.the enkei rs05rr way out of budget.double the price of this varro.but this vd06 is top pick.saw many car using this as well.

Dealer shop also recommend 235/55R18. You are correct, ive searched thru V12E2 & FK510 doesnt have the profile mentioned

So far these are the available tyres for 235/55

1- Yokohama Advan Fleva V701 - not sure price
2- Conti MC6 - RM500+
3- Conti UC6 - RM500+
4- Hankook S1 Evo2 - RM400+

Not sure about Michelin, Toyo etc.

For V12E2 the nearest one available is 235/50R18

Which brand would you choose? Thanks!!

I think it is manufactured in US.

Yeah the price is very affordable IMO. And so far no imitation Varro rims I can found around.

varro original rims likely made in taiwan..just like sparco,they are under o.z italy if not mistaken but the rims is made in taiwan so it is affordable.around rm 2500-2600+..same range as varro wheels.
p/s but sparco are not flow forms..the advanti in the range of 2.5k++ are flow form rims.

Im just guessing hehe, not sure from where it is manufactured. But Varro Wheels is a California based company.

The VD06 available from 17" up to 22"

So far I ask around, can get from

King of Rims - Shah Alam
TMK Motorsport - I think in Sunway

Thanks!!

Btw ive found that this 18" Varro VD06 weighs 8.9kg..

Is that considered lightweight?

The 18" x 8.5J - 8.9kg

and 19" x 9.5J

Considered light or not ya?