Anyway, as a K810i owner, one of the weakness of the photos taken with the camera is noise (those red and green thingies, especially in the dark or not well lit areas). You can try using a software called Noiseware Community Edition (freeware) for a quick job of reducing or eliminating the noise.. Here's the download page: Imagenomic - Imagination at Shutter Speed: Downloads

Try looking here http://www.esato.com/board/viewforum.php?forum=17

Anyway, I'm using a modified camera driver...

Better fidelity, contrast and more vivid colors. I didn't like the original driver's dull (and sometimes "washed out") color..

Original driver
Modded driver

Images have been resized. Notice the greens, the blue on the building wall, parking lot yellow stripe, the brick fence..

I'm using Withan too.

Pros: Gives vivid color, better contrast, good fidelity (Kopritis driver has best fidelity, but not so vivid colors on the spot).

Cons: Due to increased color gain, image noise increase especially in not so well lit areas (compare the window frame on the above samples), not suitable for quick night shots (must use scene settings).

Which is why I use a "de-noise" utility if the picture has too much noise.

This post has been edited by lex: Jul 7 2008, 12:56 PM

You can do it yourself using the guide in the links posted... Only tricky part is getting the factory service mode to activate...

The FM radio antenna is using the "long wire part " of the headset itself. That's why the radio only works when the headset is plugged in...