Vmod can allow you to clock higher and help stabilize higher clock.I guess vmod will give you another 100mhz

But i don dare to Vmod, void warranty le... CAn i rub off the the pencil stain if i don need it anymore? How about add voltage thru bios?

pencil mod even worst cuz hard to tune the voltage.. use resistors can desolder and send for warranty...

bios voltage mob not working..
pencil mod,measure the stock resistance first and after done pencil mod

oh, where to get the conductor pen? I heard they say use pen the thickness of the strip u applied will affect the voltage, i no multimeter also. Can recommend any? So coolice, my score ok bo?

at tat clock speed,me and longsiew(vrzone) got similar score for sm2 and sm3..ur cpu bottlenecking perhaps?

This post has been edited by coolice: Jul 4 2008, 10:02 PM

ATI HD4850 pencil modded to Vgpu 1.26v & Vmem 2.1v
Running@785core 1200mem


Attached thumbnail(s)

1.26v idle or load boss?

wah nice nice. Can u try 3dmark vantage?

---

Added on July 4, 2008, 11:32 pmBut how come my vantage score like 1k higher than urs?

This post has been edited by ben3003: Jul 4 2008, 11:32 PM

1.26v load 3D

I have heard about MSI bios is giving higher voltage, is it true? And can my sapphire flash to MSI bios? I scare like last time i flash my 9600gt from galaxy to evga one and it screw things up

tats the part i don understand..zzz..gonna try 32bit 2008 next week

Lolz.. another thing is, seem like my Vantage GPU score are better than most of the review site, even they have superior CPU, i also dunno why haha. I went to saw those ppl score, mine also slight higher lolz.

This post has been edited by ben3003: Jul 5 2008, 12:36 AM

anybody tried to overclock 4870?

i'm on XP.

680 / 1050 - 3dmark06 i get 11892

my processor is a little faster than yours i suppose, E2140 @ 3.2ghz.

unfortunately 680 / 1050 doesn't pass lost planet test.

default fan speed. is yours on default fan speed?

mine is on accelero s1+xigmatek 120mm fan running at full speed i think becos i straight plug into the molex one. Ur processor owes pull out better 3dmark06 score. But i think 3dmark a little bit processor dependant, when processor is better, the sm2.0 sm3.0 mark sure pull up by 300-400 one. Like if i oc my proc to 3.0ghz, sure i can get better score. But my PSU not enuf juice for me to oc both the card. Btw, i uploaded MSI bios that techpowerup forum said it come with higher voltage than normal one.

---

Added on July 5, 2008, 11:15 amanother question is, is e2160 more powerful than e6300? Or only faster in benchmarking but not in gaming? I tot 2160 only have 1mb cache while e6300 have 2mb cache.

This post has been edited by ben3003: Jul 5 2008, 11:15 AM

mine cannot get past 675/1050..
700/1100 fails artifact scanning, btw im waiting for factory oced 4850 bios, maybe the vgpu is higher

Tweak ur bios, use 1.2v. NOw my 1.2v rock stable i think, becos before that, i cant run 3dmark06, stuck at the firefly there, last night i change to 1.2v, it ran 3dmark06 sucessfully.

bios voltage mod actually working??

It worked until 1.2v and not higher than that, U can try and see, i dont have multimeter to see it really works or not. I saw ppl from techpowerup forum said so and they tested it. Normally the card only hit 1.1-1.5v.

---

Added on July 6, 2008, 10:43 amMy card black out at 700/1100 when playing age of conan lolz. Probably more Vmem is needed for 1100 to rock stable. I gonna try 700/1050 for the time being.

This post has been edited by ben3003: Jul 6 2008, 10:43 AM