just saw the news today, Techpowerup! release HD4850 RV770 VGPU, VMEM mod guide, after mod HD4850 kill GTX280 a piece of cake.

---

Added on July 2, 2008, 12:18 pmI think you adjust to 50% enough already, because over than 50% fan speed to noisy...

This post has been edited by Jian_yi: Jul 2 2008, 12:18 PM

last week I already tested with this extreme platform at my office.

Processor: Intel C2D E8400
Mainboard: Gigabyte X48-DQ6
GPU: Gigabyte ATI HD4850 512MB DDR3 * 2 (Crossfire)
RAM: Corsair 2GB *2 DDR2 800 XMS
HDD: Western Digital WD5000AAKS

# All runing on default clock. tomorrow upload pic to share.

This post has been edited by Jian_yi: Jul 2 2008, 05:52 PM

I don't know why, maybe AMD's Graphic engineer idiot setting the fan speed 20 ~ 30% only at BIOS...

Just 2 weeks ago, I already tested with this extreme platform at my office.

Processor: Intel C2D E8400
Mainboard: Gigabyte X48-DQ6
GPU: Gigabyte ATI HD4850 512MB DDR3 * 2 (Crossfire)
RAM: Corsair 2GB *2 DDR2 800 XMS
HDD: Western Digital WD5000AAKS
PSU: Acbel R8 800watt

Here the result, only 'play' this platform without 2 hours, just a simple test. All the parts is belong my customer, I just order & assemble the system to him. In the 'limited time' for 4 hours to setup.

Because I have no time to update my software version, I still using GPU-Z 0.21, some of the GPU information detection from GPU-Z 0.21 software was wrong.

Below the test, all running under default clock. because I no enough time to do overclocking tweaks.

*****All the 3D Mark test running on 1440*900 with No AA, and start with string "-nosysteminfo"*****

[attachmentid=521920]

[attachmentid=521922]

[attachmentid=521924]

[attachmentid=521926]

This post has been edited by Jian_yi: Jul 8 2008, 11:35 PM