And both my neighbours were robbed in Japan, luckily I was at home at the time... so my house was spared

There are 2 versions 1/3 and 1/5(but more like 1/6) with similiar pose. 1/3 version has bare feet, fully sculpted legs (so u can pose her without the skirt), but with an awkwardly sculpted/odd shape body(some people coin it as alien). 1/5 version have sandal feet, feet and skirt are one piece (so no exposed legs), nice body sculpt... but a bit small for a 1/5 scale

E2046 re-produce both versions painted with their gathering line...

This post has been edited by BeastX: Jul 3 2008, 04:32 AM

kemek can claim coupon also??.. the US$5 coupon for over US$50 purchase? or $5 no condition asked? if so I could have claimed plenty..

B.T.W. Play-Asia has 25% off their in-stock items... coupons cannot apply though...

Cold cast is a method in which Polystone, a type of resin with quality of porcelain is used. No flexing is allowed. Hard/silica like meterial is added to make it like porceline

Resin is plastic (2 liquid chemical components mixing producing reaction and heat) that allow some flexing, would be resistant to Pos Malaysia handling... you can use some heating to bend and reform the plastic... The polymer is similiar to plastic begs.. cannot recall the proper chemical structure/name..

Mikuru to be released in October...
Haruhi's pic... credit to akibahobby


This post has been edited by BeastX: Jul 16 2008, 11:58 AM

20ft and 40ft container is very cheap to Port Kelang(RM4k to RM6k respectively)... provided that you are near the major shipping ports..like Osaka, Tokyo, Kita-kyushu or Fukuoka... you may need to spend (RM800 to 2k) to a Forwarder company to handle the container at port Kelang.

p.s. you brother should move a high-end car back as well if he qualifies for an AP (will be taxed according to age) and all manner of electronic goodies.. like LCD TVs which only half the price in Malaysia but higher spec (local Jap market get the best tech advancement) but u will need 240 to 120v converters. I could have brought in more had I know that I will escape from tax. The requirement was 3months of ownership... but brand new will pass right through too ... I think...

use a hand drill with a drill bit of a smaller diameter to drill out the peg stuck in her foot. Drill holes to where the pegs were... embed aluminium /copper/or steel rods of similiar size to the holes on her foot to the base... add thick (3 mm at least) aluminium backing to the base if plastic layer of the base is too thin.

Lineage 2 human at 1/8 scale.... probably able to cast-off... out in November

I can find 4... if I am not mistaken all can cast-off to a certain degree

That particular sculpt figure with the feature is not in their listing yet... though likely in the near future...

The 1/3 scale (more like 1/3.5, as kanu is not that short) is from a different sculptor with a similiar pose.

The original resin kit is non cast-off and is listed by e2046 as 1/5 scale when it should be 1/6. Daiki improved on the original kit (maybe with the help of the original sculptor) with a unwrapped breasts/chest swaping alternative and a cast off skirt (most likely).


This post has been edited by BeastX: Jul 28 2008, 08:40 AM

Euphie... probably this coming Wonderfest...




from the creator/sculptor blog...
http://seeknack.blog71.fc2.com/

This post has been edited by BeastX: Jul 29 2008, 03:32 PM

Ringo has been released ....

She has 2 sets of hair pieces ... one set for the head... one for the beg..

stayed 4 years in Japan... cheapest air ticket is by Cathay Pacific.. to/from Sabah ... 2 ways about RM1.6 to 1.7k before fuel/airport tax increase..

get the Japan Rail Pass ... if you intend to travel cheaply, by bullet train/ordinary train.. about RM900 for 7 days (14/21 days too)... unlimited all over Japan from Hokaido to Kyushu/Shikoku... if not the train/plane fees will be murder your wallet

This post has been edited by BeastX: Jul 31 2008, 03:09 PM

Trains/subway are quite cheap/resonable.. for local area/short distance/same prefacture... However it will be prohibitively expensive if you cross to another prefacture... even by car/bus/bike, they charge fees like toll.. have not tried walking/cycling over

Say from Tokyo to Kyoto... one round trip alone would/could cost RM900...

This post has been edited by BeastX: Jul 31 2008, 03:56 PM

Painted version of Euphie... curi ...from e2046 forum






This post has been edited by BeastX: Aug 3 2008, 03:17 PM

yoko/asuka combo... with the eyes and hair... I would say Asuka cosplaying as Yoko



This post has been edited by BeastX: Aug 3 2008, 03:30 PM

Asuka cosplaying as Yoko... most likely

After Kanaru in Oct....comes another Shunya girl,Nasuka from the same maker.. PVC in Dec... copy from byakuchan of xl-forums and lowyat as well



This post has been edited by BeastX: Aug 5 2008, 10:06 AM

Many times I had to remind them (xl sales/customer) by e-mail, then they send what that have already arrived while other things from the same pre-order have not arrived yet...