For case mod always prepare filing tools such as rounded file, flat file, semi-circle file. and tiny file to work on edges

im sure these are the cheapest mod tool around

For case mod always prepare filing tools such as rounded file, flat file, semi-circle file. and tiny file to work on edges

im sure these are the cheapest mod tool around

for the bezel no need 3M brand lah ...

just use those black color double sided tape can already. should be widely avaialble in most hardware stores


for 3.5" to 5.25" bay converter thing .. i've them but only in biege colors ..
shall be few pcs incase anyone need them ..

just cooling the cpu alone should be no problem.

if u can find a htpc case that's able to mount a 12cm fan behind, will be great. then can get a better performance :

1) 1x 120mm Radiator
2) swiftech's micro reservoir
3) cpu water block that able to mount 3/8" barb.

otherwise, change all to 1/4" barb & tubing then all use quick release barb

i'll try to show a pic tmr ..

is it the ones i use on the 3rd or last picture below ?