Any plans for real-time / over-time bandwidth usage reporting PER-IP/MAC? Or maybe there's already a method of doing this that I haven't figured out!
Thanks!
The Tomato/Victek's Tomato Firmware Club, Victek himself is here to help you !
|
|
Jan 28 2009, 11:01 PM
Return to original view | Post
#1
|
![]()
Newbie
0 posts Joined: Jan 2009 |
Thanks for the Tomato Firmware Mod. I'm enjoying the IP/MAC Bandwidth limiter
Any plans for real-time / over-time bandwidth usage reporting PER-IP/MAC? Or maybe there's already a method of doing this that I haven't figured out! Thanks! |
|
|
Jan 29 2009, 08:13 PM
Return to original view | Post
#2
|
![]()
Newbie
0 posts Joined: Jan 2009 |
QUOTE(Victek @ Jan 29 2009, 05:50 AM) If you are using Tomato RAF 1.23.8510ND you have the option for IMQ up to 16 interfaces or IP's, to do it read these instructions: Thanks! This is great. Though, I had something strange happen. It seemed like IMQ0 and IMQ1 were showing the same readout. Should IMQ0 be avoided? Also I noticed that in the "Last 24 Hours" section, only IMQ0 and IMQ1 seem to show up. Is that just a limitation, or did I do something wrong?For anyone who didn't know that type in console or firewall script: modprobe imq modprobe ipt_IMQ ip link set imq1 up iptables -t mangle -A POSTROUTING -d yyy.yyy.yyy -j IMQ --todev 1 ip link set imq1 up iptables -t mangle -A PREROUTING -s yyy.yyy.yyy -j IMQ --todev 1 ip link set imq2 up iptables -t mangle -A POSTROUTING -d yyy.yyy.yyy -j IMQ --todev 2 ip link set imq2 up iptables -t mangle -A PREROUTING -s yyy.yyy.yyy -j IMQ --todev 2 Thanks again for the great mod! Added on January 29, 2009, 8:16 pmOh, also I noticed there doesn't seem to be any differentiating between Upload/Download rates. It's either combined, or just showing the download. This post has been edited by nofixette: Jan 29 2009, 08:16 PM |
| Change to: | 0.0258sec
0.37
7 queries
GZIP Disabled
Time is now: 3rd December 2025 - 02:48 PM |