Request to victek
Can you have a link that tells us which version is stable and which isn't?
Because it'd be really nice... As it is everything works except for these two things (reconnect/disconnect stop working after you do it several times over and over again) and QoS is messed a little, some connections(TCP) going into the Highest priority when they shouldn't

---

Added on April 2, 2009, 2:29 amUsed a workaround.
I believe this issue is caused by TCP connections made from torrents confused as NTP packets, and thus being queued in a higher hierarchy than normal.
The workaround is to simply place the bitttorent rule at the top of the list so everything gets dumped into class E first.
I don't know if this is an issue with utorrent(+vpn) or the router firmware, so I hope more light can be shed on this issue by someone who knows more than I do on this matter(I know squat.)

Sadly I can't say the other problem is fixed, and once it's there it prevails
Disconnect/Reconnect button issue.

This post has been edited by PSB: Apr 2 2009, 02:29 AM

Under Access Restriction, I set as below:

TCP/UDP, IPP2P: All IPP2P Filters
TCP/UDP, IPP2P: BitTorrent
TCP/UDP, L7: bittorrent
TCP/UDP, L7: pplive
TCP/UDP, L7: xunlei

is it correct if I want to block p2p and pplive? what is the difference between TCP/UDP, IPP2P: BitTorrent & TCP/UDP, L7: bittorrent??

Not enable this. your router will hang.

suggest~ (p2p)
IP/MAC BW Limit
set low piority , tcp 20-50 , udp 5-10.

+

enable qos. victek default setting.

but my router no hang wor...

if i enable qos, then do i need to set the Outbound Direction under classification?

my wireless signal lost or dc every few hours. the old version work nicer than the new version. 1.22 version is fine for me. but since 1.23 the point after victek do some code optimization, my router wireless is unstable.

y is tat i can't see "IP/MAC Bandwidth Limiter" function?? im using 1.22 victek

1.23 ver. have this function
http://victek.is-a-geek.com/tomato.html

i thought 1.23 got bugs/prob?

http://cdn.adslzone.net/pub/repos/victek/T...23.8515.5-ND.7z
*- 1.23.8515 ND For Router with wireless (wl0_corerev) => 9

not sure. but the 2nd update 1.23.8515.5 .. will fix wireless connection.

y is my torrent running so slow?? im using wrt54gl bridged with dlink dsl-520b.
im using tomato raf 1.23ND (victek). i only touched the "ip/mac bw limiter" wif UPNP function enabled.
im on 1mb streamyx package. last time i used linksys wag200g running wif torrents..it was no prob wif 100kbps above. but now after i switched to wrt54gl, my torrent is crawling at less than 10kbps. however, my normal surfing is ok. went to speed test and the results was 1.5Mbps. Why is my torrent speed so slow? wat's actually goin on??
anyone facing tis prob???

This post has been edited by bsb85my: May 1 2009, 04:12 AM

-did you port forward ?
-what you set in ip/mac bw limiter?
-did you enable QOS or TCP VEGAS setting?

Port Forward:


IP/Mac Limiter:


I did not enable the "Default" QoS and TCP Vegas...

Help!!!

---

Added on May 1, 2009, 12:21 pmprob solved...found the solutions.

This post has been edited by bsb85my: May 1 2009, 12:21 PM

How can i access modem web GUI through router . For dd-wrt i juz need paste some script on startup command and firewall command . I need to monitoring my modem for line SNR

chiafoo, FYI
another happy Tomato-er reporting in!

bought WRT54GL and flashed to Tomato 1.23 yesterday. it works like charm! able to P2P@ 350KB/s without hagging.

This post has been edited by shitmyx: May 2 2009, 05:25 PM

please let me know connection stay how long~?

my router get disconnect uncertain time. If no p2p, longest can stay 28days.

maybe your router cant handle too much connections

tell us what u dl/ul most of time

afaik, my normal Tomato 1.19 longest 45days with same IP, base on my RS log

the most basic, yr modem must be good/handle DSL sync <== if super peak dl/ul can cause DC

some modem allow u to view certain details, dsl startup time & dsl uptime

thanks to Tomato.

now I am able to P2P for long hours without disconnection. stable speed@ 350-400KB/s.

Date Download Upload Total
2009-05-05 0.58 GB 0.05 GB 0.63 GB
2009-05-04 21.49 GB 1.52 GB 23.01 GB
2009-05-03 5.91 GB 0.66 GB 6.57 GB
2009-05-02 11.21 GB 0.94 GB 12.14 GB

I'M LOVIN IT!

It's great to see how Tomato make happy user, please don't post links to download server, use http://victek.is-a-geek.com to check for newer version.

question about this script:


/usr/sbin/iptables -I POSTROUTING -t nat -o vlan1 -d 192.168.1.0/24 -j MASQUERADE
ip addr add 192.168.1.2/24 dev vlan1 brd +

my modem's IP is 10.0.0.1, so...

/usr/sbin/iptables -I POSTROUTING -t nat -o vlan1 -d 10.0.0.0/24 -j MASQUERADE
ip addr add 10.0.0.2/24 dev vlan1 brd +

correct? used to be able to get it to work on my old modem, never got it to work on my new one.