Cause slow surfing is caused by ACK resolving at outbound.. I don't care inbound .. read QoS how to at linksysinfo.org Tomato forum.

---

Added on February 2, 2009, 9:14 amYou need enough free memory in your page size defined when mounting the kernel and build compilation... take source code and work for it but be careful to maintain the right ratio, the most important is the resumed hash table, others are the son of the last result. I extended hash table up to 8192 tracking connection with a ported 2.4.35 linux kernel, enough for one individual and for a comunity with the right repartition using QoS or IP/MAC limiter TCP/UDP connection limit.



This post has been edited by Victek: Feb 2 2009, 09:14 AM

I don't know what you mean, sorry, If you enabled the QoS there are some rules already defined, so, it will affect the test you show ...

---

Added on February 7, 2009, 7:30 amNo, , we are talking about a neutral router, so.. why do you expect that one router without dsl modem will offer you pppoe passthrough? ... Essentially this feature enables an rfc1483 bridge mode in the modem so the PPPoE process occurs in the connected device, eg a firewall router or one PC. The router can't handle it.


This post has been edited by Victek: Feb 7 2009, 07:30 AM

Yes, there is one way, but out of this thread of Tomato, it is a help forum, not a laboratory

developer,

1.23.8513 ND is a version for router with wl_core revision >7 check it before.

A new release for ASUS WL500gP v1 & v2, WL520GU is available. Some features are:

USB Ready
FTP LAN/WAN server Ready with users and privileges.
SNAT & MASQUERADE Ready
Wireless driver wl_core revision >7
New theme (skin) upgrade.
Release 1.23.8620 RAF ND-USB

BE Careful, only for the mentioned routers, don't try in others, it's your responsability.

Download from http://victek.is-a-geek.com

Some screenshoot..

http://img255.imageshack.us/img255/1092/usb.png

Then just do an nvram erase before and after update the firmware and the default settings will ensure you an smooth wireless operation.

Prasys,
For bandwidth monitoring ... Administration/Bandwidth Monitoring .. and you can select where do you want to keep your data:
RAM
NVRAM
CIFS 1
CIFS 2
JFFS2
Or any customized path ..like the IP of your PC and the path ..

The frequency of data export can be also fixed.. every hour, 2 hour, one week, one month..

For SNMP ... Administration/Syslog .. tick Log to Remote System and select the frequency and the kind of events you want to monitor... then use a more convenient tool like Syslog Watcher in your PC (using UDP port 514) and that's all.

Cheers

Go to Access restriction and create a rule for the clients you want to restrict Internet access (tick this option), then LAN/WLAN traffic is permited, WAN traffic is blocked.

This post has been edited by Victek: Mar 4 2009, 05:24 PM

jackieng, already answer you in linksysinfo.org ..

calvin, for sure you have to use the nice Tomato RAF 1.23.8623.2 release, Samba, FTP and printer support is built in

This post has been edited by Victek: Mar 30 2009, 09:28 PM

It's great to see how Tomato make happy user, please don't post links to download server, use http://victek.is-a-geek.com to check for newer version.

Hi all, back again with a new release after we fixed some inconsistencies in Tomato 1.24 & 1.25 official releases. So, here it's; Tomato RAF 1.25.8515 ND is released with the following changes and improvements over 1.23/1.24 and 1.25 official release.

Changelog:

_ DNSMasq 2.49
_ Busybox 1.14.2
_ Passive mode for Wireless Survey
_ Regulatory mode for wireless
_ Wireless Auto channel by default
_ TCP_Conntrack up to 8192 connection
_ Allow multiple MAC address per device
_ SSH remote forwarding allowed
_ More precise match for l7 ftp pattern
_ Miniupnpd updated to ver. 20090605
_ Wan_is_a_LAN feature included when WAN is disabled
_ All the features of Official Tomato 1.25
_ All the features of Tomato RAF
_ ND version with wireless driver 4.158.4.0
_ 140 IP/MAC in restriction table
_ 140 IP/MAC limit in IP/MAC limiter

You can download as always from http://victek.is-a-geek.com/tomato.html

In test version section you have the link. Also the source code following the terms of the GPL is available in Source code section.

Enjoy!!! and also comment any issue you will find.

barry80, go for this test version, after 1390 downloads no issues has been reported. Almost of complaints was due to inexperience from user. I'll fix as stable version today.

Hi prasys, no doubt, OpenWRT is the right answer... but .. wait a while .. you will see some interesting news in next RAF release ...

IcEMoCHa, hehe, you got it .. yes, passive mode and new wireless Auto channel set the best channel for your wireless environment.. this is the reason why Tomato is more convenient for non skill people playing wireless channel and interferences ... the target is to have a firmware for dummies. Don't misunderstand my words, I mean.. easy to set, ready to go.

This post has been edited by Victek: Jul 7 2009, 11:49 PM

Tomato 1.25.8025 (normal wifi driver version) is ready to download. When you must use this version? Do the following:

Open a DOS sesion and Telnet the router IP (telnet 192.168.1.1.. i.e)



If corerev digit is =>7 or 9 then use ND version (1.25.8515 ND)
If corerev digit is <7 use normal version (1.25.8025)

Thanks

This post has been edited by Victek: Jul 12 2009, 05:48 PM

developer, really need it? it's simple.. but all the people ask "WHERE IS THE RESET BUTTON" first

Cheers

developer , working in your request .. will add reset button disabled option in administration screen... but a silly question, how will you enter in your router if you forgot your password? ..... funny... Use the SES front button and select 'Reset to default', then after you pressed continously for more than N seconds reset is done, is ok for you?

Well, longtime ago since my last visit to this amaizing forum to deserve a post for my mods, I hope everything is OK and apreciate your comments.

You have now 14 diferent version of Tomato RAF adapted to your particular model.

Thank you very much!

http://victek.is-a-geek.com

If your Internet account gives you more than 50Mb speed, then use 1.28.121006
If you have problems with WDS mode then use 1.28.8515 ND
If you're a stronger P2P user then use 1.28.8617

Thank you for the feedback, two clarifications:

Versions based on K2.6 are TeddyBear version with RAF mods only affects to IP/MAC limiter, As already stated in linksysinfo.org WRT54GL is an old unit to handle K2.6 kernel, Bandwidth is poor with K2.6 ... but people asked to shift to K2.6

Version 1.28.121006 is based in the previous RAF version updated, so, I appreciate your comment, this version is based in 2.4.20 kernel, then the CPU usage is more reasonable and more convinient for heavy P2P.

Show the top process and P2P values (conntrack_ct) in your router to fix your statement about 'extremely unstable', then you can help in a more positive way , but I'm sure Tomato RAF 1.28.121006 is the right version for you.

This post has been edited by Victek: Dec 11 2010, 01:19 AM

Rgds!

---

Added on December 12, 2010, 10:05 amWithout USB? ... Why? ... anyway, it's your beer ...

Then I would recommend you Tomato_RAF_1.28.121006 very, very stable w/o USB and VPN but.. your router has plenty of capacity to run Tomato-RAF-1.28.8525_VPN.7z (with USB (Samba, Printer Server, FTP, DLNA & VPN)), .. CPU is faster than WRT54GL..

This post has been edited by Victek: Dec 12 2010, 10:07 AM

You can flash with Tomato RAF 1.28.121006 (standar with kernel 2.4.20) .. but please try also 1.28.8618 (kernel 2.6 Mipsr1)

Regards!