THE DD-WRT V2 ( V24 SP2 Firmware Released ), Support For All DD-WRT Compatible Router
|
|
 Oct 14 2008, 11:06 AM
Return to original view | Post
#1
|
 
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun  
|
All sifu here, i wanna ask if i flash my WRT54G2 to this DD-WRT firmware, it is i can set the setting like u guys use although u guys dint use the same modem like me, right??? Can i set my modem(Linksys AM300) as Bridge mode only, then set my broadband router(If successful flash to DD WRT) as PPPOE???
|
|
|
Oct 14 2008, 10:18 PM
Return to original view | Post
#2
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(NtahX @ Oct 14 2008, 08:08 PM) Even though i don't quite understand the "settings" as u mentioned. but i do get the last point u were saying... Sry, the "Setting" i mean is the router website, it is all will be same, the menu option and the setup setting?? Yes.. set your modem to bridge mode 1st then connect the rj45 cable from the modem to WAN port of u'r WRT54G2 router then connect u'r pc/laptop to the WRT54G2 router access through web 192.168.1.1 change setup to PPPoE & configure it done! for WRT54G2 pls check the supported device list of dd-wrt FW http://www.dd-wrt.com/wiki/index.php/Suppo...ed_til_today.29 WRT54G2 v1.0 Broadcom $45 Micro Only BCM5354 chip rev 2 240 Mhz ? 8 MB 2 MB None / 2 Internals 4 LAN, 1 WAN no ? 12V/0.5A no 203 x 35 x 160 mm ? WIP  So my router support the FW if my device is inside the list?? |
|
|
Oct 15 2008, 05:50 AM
Return to original view | Post
#3
|
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(NtahX @ Oct 15 2008, 05:21 AM) almost the same. Thx bro check this image for reference/example: http://ntahx.net/images/setup.jpg Not all on the list will be supported such as WRT54G v7... pls read-out the "Notes for Running DD-WRT" as for u'rs u might want to check this page 1st & understand the guides to flash the dd-wrt FW http://www.dd-wrt.com/phpBB2/viewtopic.php?p=206237#206237 be carefull not to brick u'r routers   , hope the luck is ony my side, will update here if my router can successful flash the fw. Opps... still working in process, so i m dun have the fw to flash it yet.This post has been edited by nakata101: Oct 15 2008, 06:04 AM |
| Change to: |  0.0220sec
 0.59
 7 queries
 GZIP Disabled
Time is now: 5th December 2025 - 05:24 PM |
Quote