need to ask dd-wrt gurus here

i have 2 router dir-600 (standard v24 preSP2 dd-wrt) and wrt54g2 (micro dd-wrt). if i want to setup repeater or wds which one should be use as primary and secondary. by the way can i setup wds using this router ?

This post has been edited by kelembai: May 11 2010, 02:26 PM

http://www.wi-fiplanet.com/tutorials/artic...ss-Repeater.htm

[/quote]

okey thank , by the way repeater available on standard and micro ?

This post has been edited by kelembai: May 11 2010, 11:16 PM

which one is better, repeater or repeater bridge for home user , double story access by 2 laptop wireless

okey will try the wds, it is okey if i use 1 linksys wrt54g and wrt54g2 for wds ?

bro do not understand the configuration below, taken from the link


Step 5: Set the wireless network mode, SSID and channel for both routers. Click Wireless/Basic Settings. Set your Wireless Mode to "AP" for both routers.

Choose a "G-only" network mode only if you do not need to support any B mode clients. {Remember that if you choose a mixed or B-only network, you cannot use WPA security with WDS, and therefore must use either WEP security or none at all.} If i use mixed it is mean i cannot use WPA, is it true ?


Set the SSID for each router. Remember that if you choose a G-only network and use WPA security, the SSID must be identical for both routers. Otherwise, opt for different SSIDs, as shown here. This ensures I can specify exactly which AP -- upstairs or downstairs -- to connect to.

[SIZE=7]It is mean he use WEP[COLOR=red]

Please comment

This post has been edited by kelembai: May 27 2010, 04:52 PM