Guys, I have some question here. I'm running DD-WRT 18000 B.S. Mega build on Linksys E4200. I installed Optware the right way, then everything seems working fine except the automount function. I had format my external HD Bufallo into three ext3 partitions - 1st is for optware, 2nd swap and 3rd Data. The problem is everytime the router restarts - the GUI will show my 1st and 3rd mount to /opt. So i had to manually umount the 2nd /opt and mount it to /mnt. Then other service from Optware seem working fine. But still the web GUI shows there's 2 /opt but in the shell - everything is normal and i can access the shared /mnt drive via samba from my windows-based PC>

There's another user having the same problem as me.
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=153239

The router seem very stable and able to power up an external Buffallo USB HDD without an external power adaptor..

Then another issue is the HDD seem to can't spin down when idle - how to check there's no activity on HDD apart from the slight vibration/sound. I've set to hdparm command to 10 minutes.

---

Added on April 8, 2012, 2:25 amNew build release by Eko for Linksys.

http://www.dd-wrt.com/site/support/other-d...6%2Fsvn18946%2F

This post has been edited by hypermount: Apr 8 2012, 02:25 AM