V600 fits all ATX & m-ATX mobo, ATE price list --> wrong

usually it's kinda hard for the manufacturer itself to state wrong things about their products cause posting the product details isn't easy --> going through several process (which if got any error will be detected at any stage)


ATE shop --> third floor from the TOP floor

where? u have to look around for it

more spacing doesn't mean it got nicer air flow, air flow doesn't depends on your casing size, small casing also can have better air flow than bigger casing...

a good air flow determines by how well u managed ur cable inside (so it doesn't restrict air flow) & what type of fan u using the fans u using are actually resulting a significant air flow result

if using 100cfm intake & exhaust fan:
--> ur case will have 100 cubic feet of fresh air going inside ur casing every minute
--> ur case will let 100 cubic feet of hot air out of ur casing every minute

they all hides the cable at the 5" bay drive --> that's why u don't see em

the best thing about Lian Li transparent side panel is that the acrylic is riveted...

it's easy to get it off, wait till u want to put em back --> the acrylic will crack

wanna use screws, fine wait till how fugly it looks

remember my black parade, the transparent side panel should have been riveted, but somehow Ianho couldn't do it, cause the acrylic crack, dunno if he got a new method solving it

so Ianho, already found the solution??? i bet lotsa ppl gonna send their 007 to replace with a new acrylic

This post has been edited by E-J@1: Apr 7 2007, 05:34 AM

main thing light weight aje, 2nd cantik, dat's all for alu case

secc case is toughness on the material, but it's not like we going to play american football with our case

i'm not suprise why there's not seller for Raidmax
due to its design + structure that is suxx wanna gaming casing, got lots of brand that is better in design + quality made --> CoolerMaster & Gigabyte
however i will shock if no seller for Lian Li case

Lian Li PC-V1000 [Link]

or

Lian Li PC-V1200 (may need to add up RM20 - RM30) [Link]

are u damn sure that's dirt cheap, RM189 for an aluminum case with a superior spec for it if u are rite bout this, show us the link, i bet it took only 1 day for the stocks to finish, damn RM189 with:

1. 100% Aluminum Case
2. 1.5mm Aluminum Body
3. Removable Mobo Tray (Sliding Type)
4. Can be fitted Extended ATX Mobo (sure can be fitted 8800GTX SLIed)

sadly, too good to be true

go for it, the case can fit:

1. 5.25" x 5
2. 3.5" x 2
3. 3.5" x 6

two things i dislikes bout this case:

1. Weight = 11kg (case alone --> + psu + 5 hdds + 2 odd, damn heavy for me)
2. SECC

old case

NZXT LEXA Classic Series [Product Link]

Thermalright Heatpipe Cooling Case Series


HSC-100


HSC-300


HSC-500


HSC-700


really wonder how would a "heatpipe" case really helps cooling the case as i bet there would be no direct contact with the heat generator component

what cha all think?

really like the tower heatpipe casing

just hope their quality is nice, weight also is a problem, as long it stay below 8kg alrite by me

really, really like the tower heatpipe case, the design is unique like those custom design case

Lian Li PC-7YCF [Link]









This case comes with:

1. 12cm intake fan
2. 12cm exhaust fan
3. 08cm top blower fan
4. Transparent side panel (with 25cm side case fan)
5. Fully aluminum

Note: PC-007FA/007-FB is the Lian Li PC-7YCF [Link]

u have to add RM38.00 from your current budget

RM238 (Silver) / RM248 (Black)

plus another RM140 for transparent side panel

equals to RM378 (Silver) / RM388 (Black)

it's good that u narrow down to 2 brands, now tell us As Much As Possible bout ur taste for casing

example: do u prefer casing with doors?

btw, here's a Lian Li price list, check out which model is RM400 and below... then surf through Lian Li web site for more details


This post has been edited by E-J@1: Jun 13 2007, 05:57 PM

still prefer to buy a whole transparent side panel & ask modders to mod it --> blow a 120mm fan hole on the acrylic, nicer & i still able to see my hardware (if i don't use a non-transparent side case fan like aluminum fan )

but the modding is in da process la, not straight out the box

the trick to this is to make a long fan cable
make it long enough so that when u open ur side panel u can disattach the 3-pin cable easily, if it's too short then it would be a problem la

i found one Soldam Casing in the Garage Sale Section...

Model = Soldam XR3
Cost = RM1350

better i upgrade my graphic card or SLIing

LOL... my suggestion is based on local availability, don't think there is any disto bring in it here unless someone willing to buy and post it here

Cooler Master Stacker 830 CSX Limited Edition Series









Price = RM 3,488.00

pricey? next time state your budget