Casings recommendation thread, What to buy, where to buy, how much?
|
|
 Mar 26 2007, 10:48 PM, updated 17y ago
Show posts by this member only | Post
#1
|
 
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan 
|
All u guys looking for new cases n recommendations, pls post here.
The previous thread sumhow got screwed up when I merged it with a new 1. So here's the new Casings Recommendations thread. This post has been edited by ianho: Jun 25 2008, 10:22 AM |
|
|
|
|
|
Mar 26 2007, 11:02 PM
Show posts by this member only | Post
#2
|
 
Senior Member
956 posts Joined: May 2006 From: Wichita / US 
|
Power Logic Modena 1200X
Market price : RM110 bundle with 250 true power PSU and transparent side panel.  |
|
|
Mar 27 2007, 01:34 AM
Show posts by this member only | Post
#3
|
Senior Member
2,723 posts Joined: Jan 2006 From: Pekopon Planet ~~~ 
|
i'm kinnda interested with elite cm..
where do u think in LYP i can "molest"  this casing?? coz went to all it, i cant find it there at the rack... i want to take a look first the casing ...  and roughly how much it gonna cost?? |
|
|
Mar 27 2007, 05:24 AM
Show posts by this member only | Post
#4
|
Junior Member
335 posts Joined: Nov 2004 From: Paradise in Hell 
|
Looking for a nice, spacious BTX casing. Might be running 2 SLi and PhysX. Able to fit in 6 hard disk spaciously + 2 optical drive. Most importantly, must have good airflow.
Budget max RM1k without PSU. Hope it's not too little. |
|
|
Mar 27 2007, 10:17 AM
Show posts by this member only | Post
#5
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(asmly14 @ Mar 27 2007, 05:24 AM) Looking for a nice, spacious BTX casing. Might be running 2 SLi and PhysX. Able to fit in 6 hard disk spaciously + 2 optical drive. Most importantly, must have good airflow. If it's a workhorse ur lookin for --> the old Stacker (not the new sh1t)Budget max RM1k without PSU. Hope it's not too little.  You can whack everything but the kitchen sink inside. |
|
|
Mar 27 2007, 11:51 AM
Show posts by this member only | Post
#6
|
Senior Member
824 posts Joined: Oct 2006 From: P J
|
TJ07. Should b good for all that you need.
|
|
|
|
|
|
Mar 27 2007, 04:23 PM
Show posts by this member only | Post
#7
|
Senior Member
734 posts Joined: Feb 2006 From: Selangor
|
QUOTE(sniper on the roof @ Mar 27 2007, 10:17 AM) If it's a workhorse ur lookin for --> the old Stacker (not the new sh1t) what are the main diferences of the old and new stacker?You can whack everything but the kitchen sink inside. anyway, rm1k can get pretty top end stuff.... |
|
|
Mar 27 2007, 04:43 PM
Show posts by this member only | Post
#8
|
Senior Member
1,597 posts Joined: Nov 2005
|
my bad....... read wrongly
This post has been edited by cablesguy: Mar 27 2007, 04:45 PM |
|
|
Mar 27 2007, 07:19 PM
Show posts by this member only | Post
#9
|
Senior Member
951 posts Joined: Nov 2005 From: Jager Bomb
|
Hello~~
Mind if i ask, can 8800gts be fitted into TJ04??  |
|
|
Mar 28 2007, 02:34 AM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(rastablank @ Mar 27 2007, 07:19 PM) Hello~~ Of course can. The GTS is very short oni.Mind if i ask, can 8800gts be fitted into TJ04?? |
|
|
Mar 28 2007, 10:08 PM
|
Junior Member
160 posts Joined: Mar 2006 From: Klang... tesco klang
|
guys,
i have some problems choosing some casings... i have narrow down my scope down to CM stacker 810 and TT Shark both are tower casing and around the same price. i'm still at lost at which is better compare to the other... pls don't tell me lian li is better... i know it's good but i can't get lian li in penang! so guys, in terms of peformance and price ratio...please enlighten me. other suggestion of other case are welcome. regards, point blanc |
|
|
Mar 28 2007, 11:29 PM
|
Senior Member
4,482 posts Joined: Jul 2005
|
gigabyte aurora 570!!!
up 2 u actually. wat u like then just get it. |
|
|
Mar 29 2007, 01:10 AM
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(asmly14 @ Mar 27 2007, 05:24 AM) Looking for a nice, spacious BTX casing. Might be running 2 SLi and PhysX. Able to fit in 6 hard disk spaciously + 2 optical drive. Most importantly, must have good airflow. Highly suggest that u get a TJ09, it can fit 6 drives, dedicated mid section air duct just for the display cards but it's not BTX Budget max RM1k without PSU. Hope it's not too little. |
|
|
|
|
|
Mar 29 2007, 01:48 AM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(Bliz @ Mar 29 2007, 01:10 AM) Highly suggest that u get a TJ09, it can fit 6 drives, dedicated mid section air duct just for the display cards but it's not BTX BTX can be done 1. No problemo.  |
|
|
Mar 29 2007, 02:07 AM
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(ianho @ Mar 29 2007, 01:48 AM) BTX can be done 1. No problemo. yeah, like what uncle done to his ultimate sponsored casing.very2 nice!!!!  |
|
|
Mar 29 2007, 10:11 AM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(ianho @ Mar 29 2007, 01:48 AM) BTX can be done 1. No problemo. It's going to be tougher than TJ07 since not all of the TJ09 internals are removable |
|
|
Mar 30 2007, 03:54 AM
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(fantagero @ Mar 27 2007, 01:34 AM) i'm kinnda interested with elite cm.. moderno = rm130 (+rm10 get transparent side panel!)where do u think in LYP i can "molest" this casing?? coz went to all it, i cant find it there at the rack... i want to take a look first the casing ... and roughly how much it gonna cost?? cycom = rm140 c-zone = rm269 wit 380w psu which model u prefer? i'd go for 330.. |
|
|
Mar 31 2007, 10:38 AM
|
|
Junior Member
160 posts Joined: Mar 2006 From: Klang... tesco klang
|
guys,
actually what do you look into when planning on a casing? besides: air flow, amount of fans it can support, weight, space (expansion of ROMS and HDD).. is there anything i left out? regards, point blanc |
|
|
Mar 31 2007, 12:15 PM
|
|
Senior Member
2,723 posts Joined: Jan 2006 From: Pekopon Planet ~~~
|
QUOTE(nazerry @ Mar 30 2007, 03:54 AM) moderno = rm130 (+rm10 get transparent side panel!) ehmm.. thanks..cycom = rm140 c-zone = rm269 wit 380w psu which model u prefer? i'd go for 330.. owh. moderno also got.. later can go to the shop.. any comment about this casing?? compare to C5 CM??? wut the diff bet 330 and 331??? as far as i can see from the picture.. this is the nearly perfect casing within it budget.. any model can beat this?? 12cm front and back.. QUOTE guys, actually what do you look into when planning on a casing? besides: air flow, amount of fans it can support, weight, space (expansion of ROMS and HDD).. is there anything i left out? regards, point blanc i thnk all.. depends on user..  me.. prefer not too big casing like TJ from silverstone.. coz i need to carry my cpu travelling back to my hometown This post has been edited by fantagero: Mar 31 2007, 12:17 PM |
|
|
Apr 1 2007, 07:11 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(fantagero @ Mar 31 2007, 12:15 PM) ehmm.. thanks.. owh. moderno also got.. later can go to the shop.. any comment about this casing?? compare to C5 CM??? wut the diff bet 330 and 331??? as far as i can see from the picture.. this is the nearly perfect casing within it budget.. any model can beat this?? 12cm front and back.. moderno got it on their website, still, better call them b4 u go there. just in case.. here's some camparison btw 330 and 331. cm5 got more reviews and recommendation tho.. why not add few more bucks for LL pc-g7 (if the promotion still got stock la  )edit: hey, fo33il's selling his cm5! QUOTE i thnk all.. depends on user.. owh i'd go anywhere with TJ-07!! me.. prefer not too big casing like TJ from silverstone.. coz i need to carry my cpu travelling back to my hometown  haha! This post has been edited by nazerry: Apr 1 2007, 07:13 AM |
|
|
Apr 1 2007, 10:48 AM
|
All Stars
14,908 posts Joined: Jul 2005 
|
QUOTE(nazerry @ Apr 1 2007, 07:11 AM) why not add few more bucks for LL pc-g7 (if the promotion still got stock la No, no more PC-G7 from ATE computers. )Stock finished, and promotion also no more. |
|
|
Apr 1 2007, 01:28 PM
|
|
Senior Member
2,723 posts Joined: Jan 2006 From: Pekopon Planet ~~~
|
QUOTE(nazerry @ Apr 1 2007, 07:11 AM) moderno got it on their website, still, better call them b4 u go there. just in case.. how much roughly is the g7???here's some camparison btw 330 and 331. cm5 got more reviews and recommendation tho.. why not add few more bucks for LL pc-g7 (if the promotion still got stock la )edit: hey, fo33il's selling his cm5! owh i'd go anywhere with TJ-07!! haha! if buy expensive casing.. cant mod leh... sayang.. haahahaya lo... more to gamer looks when carrying that TJ.. hahhaa like cfmc did.. |
|
|
Apr 1 2007, 01:49 PM
|
Junior Member
332 posts Joined: Nov 2005 From: w.maju / k.terengganu
|
is the gigabyte 3d aurora 570 good?
planning to buy the case. |
|
|
Apr 1 2007, 02:07 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(yellow_label2207 @ Apr 1 2007, 01:49 PM) is the gigabyte 3d aurora 570 good? As a previous owner & the first user of that casing in this forum [or maybe in malaysia planning to buy the case.  ] i would say no.I used that casing for only 3 month, then sell it back. The reason? bad airflow + bad thermal performance. |
|
|
Apr 2 2007, 06:11 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
fantagero : aw man, that's my dream case so far. but soooo not cheap! ayyak!
sHawTY : really?  it got such sweeeeet design!yellow_label2207 : hey how bout TT big armor then? hehee.. This post has been edited by nazerry: Apr 2 2007, 06:18 AM |
|
|
Apr 2 2007, 05:00 PM
|
|
Junior Member
332 posts Joined: Nov 2005 From: w.maju / k.terengganu
|
i thinking between stacker 810 @ stacker 830.
but i really like the 3d aurora 570. |
|
|
Apr 2 2007, 07:23 PM
|
Senior Member
2,524 posts Joined: Jan 2003 From: Beneath the starry night
|
QUOTE(sHawTY @ Apr 1 2007, 02:07 PM) As a previous owner & the first user of that casing in this forum [or maybe in malaysia Really!!!!?? That's odd. My friend is using the normal Aurora and the airflow is fine. I thought the internal for both Auroras is similar. ] i would say no.I used that casing for only 3 month, then sell it back. The reason? bad airflow + bad thermal performance. |
|
|
Apr 2 2007, 07:31 PM
|
|
Senior Member
2,497 posts Joined: Jan 2006 From: Selangor
|
QUOTE(hypermax @ Apr 2 2007, 07:23 PM) Really!!!!?? That's odd. My friend is using the normal Aurora and the airflow is fine. I thought the internal for both Auroras is similar. a few month back there's some forum discussing regarding this aurora casing (forgot the name's of the forum ).most of the user not satisfy with the casing for same reason: bad thermal dissipation and airflow is not good at all.... |
|
|
Apr 2 2007, 08:29 PM
|
|
Senior Member
4,482 posts Joined: Jul 2005
|
haha, memang la, the case comes with a few 1200rpm 12cm fanz rite? but then rm4xx rm5xx , therez alot other better choice.
|
|
|
Apr 3 2007, 12:54 AM
|
|
Senior Member
824 posts Joined: Oct 2006 From: P J
|
I can't comment much on the 3D aurora 570, but my bro using the original 3D aurora, it has not good ventilation bcoz his graphic card was blowing the hot air towards the HDD, this makes his 3 HDD warm up and the front intake not strong enuf to get it cool sufficiently, but the 2x 120mm exhaust fan does it's job coz with the Zalman CPU cooler, his Pentium D 930 can be cooled to 20C in an airconditioned room, only thing the bottom part of the casing is hot due to the 7800GT blowing all the hot air in.
I think of using the Vizo cooler like the one in Uncle ianho's King Kong II, it should solve some issues with it, or make sure the VGA cooler is blowing the hot air towards the back of the casing. |
|
|
Apr 3 2007, 09:26 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
The main problem about Gaygaybyte 3D Aurora [New model or Old model, it's the same] is about the intake fan.
There's a lot of problem on the intake area. 1) The HDD Bay are facing the sidepanel, which means the direct airflow is blocked by the HDD bay. 2) The HDD bay does have holes in it's wall, but the holes are too small to compare with my LL PC-G7 hdd bay. 3) The airflow is also blocked by the honeycomb as the fan is outside of the honeycomb, not inside. This, creates a turbulence where the air can't go straight into the casing which creates bad airflow. 4) One intake and two exhaust? Bad idea don't you think? Gaygaybyte should think of a way dealing with this kind of problem. To those 3D Aurora users, there is a way, you can send your aurora's to ianho and ask him to mod the HDD bay to face the PCI slots so that the airflow could go directly to the GFX and this will result to better airflow. If you want better result, ask the modder to cut a blowhole on that honeycomb, with this, the intake will be much much better as more air can go directly into the casing. To create a better airflow, i suggest putting another 120mm intake blowhole into the casing. Maybe on the top of the casing? Just my suggestion though. |
|
|
Apr 3 2007, 04:45 PM
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Need suggestion for casing with nice air flow.
Budget around rm200 ~300 (max). |
|
|
Apr 3 2007, 05:28 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
STOP opening new topics!
Go here: http://forum.lowyat.net/topic/432628 and ask you question there. Read here: http://forum.lowyat.net/index.php?showtopi...post&p=11010706 And here: http://forum.lowyat.net/index.php?showtopi...post&p=11010752 Don't you understand simple english?  This post has been edited by sHawTY: Apr 3 2007, 05:47 PM |
|
|
Apr 3 2007, 06:11 PM
|
Senior Member
2,239 posts Joined: Jun 2006 From: K.L
|
QUOTE(vincent09 @ Apr 3 2007, 04:45 PM) Need suggestion for casing with nice air flow. check my sig. 2 casing for saleBudget around rm200 ~300 (max). |
|
|
Apr 3 2007, 06:45 PM
|
|
Junior Member
332 posts Joined: Nov 2005 From: w.maju / k.terengganu
|
so a 3d aurora 570 is still ok but i must make a few mod to make the airflow better right.
i'm so relieved. really like the design. thanx guys. |
|
|
Apr 3 2007, 06:50 PM
|
All Stars
15,278 posts Joined: Jan 2003
|
im looking for something to replace my pratey 730, but i only have a budget of RM500 which leaves me with the TJ06.....
any of you guys know where to get sheet alu? |
|
|
Apr 3 2007, 06:57 PM
|
Senior Member
3,622 posts Joined: Jan 2003
|
........... mod it
|
|
|
Apr 3 2007, 07:01 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(kev da man @ Apr 3 2007, 06:50 PM) im looking for something to replace my pratey 730, but i only have a budget of RM500 which leaves me with the TJ06..... What's a Pratey 730? any of you guys know where to get sheet alu? Tried googling, but can't find any info about that. |
|
|
Apr 3 2007, 07:22 PM
|
Senior Member
1,997 posts Joined: Jan 2003 From: Your Grandma With Kisses
|
QUOTE(sHawTY @ Apr 3 2007, 07:01 PM) What's a Pratey 730? It's a praetorian lar Tried googling, but can't find any info about that. http://www.google.com.my/search?hl=en&clie...ian+730&spell=1 |
|
|
Apr 3 2007, 08:01 PM
|
Senior Member
719 posts Joined: Nov 2006 From: :morF
|
need opinion about this 2 casing.
tt soprano dx & tt armor jr soprano dx> armor jr or armor jr > soprano dx This post has been edited by dfcloud: Apr 3 2007, 08:01 PM |
|
|
Apr 3 2007, 08:08 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Need suggestion for casing with nice air flow.
Budget around rm200 ~300 (max). |
|
|
Apr 3 2007, 08:29 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Thanks z3r0717, i go check others XD.
Acey, if i know to mod XD i can do for it XD. |
|
|
Apr 3 2007, 09:39 PM
|
|
Senior Member
2,027 posts Joined: Jan 2003 From: Kuala Lumpur, MYS
|
Where to get a Lian-Li PC-V1200B Plus II in KL?
|
|
|
Apr 3 2007, 11:22 PM
|
 
Elite
4,210 posts Joined: Jan 2003 From: Malaysia
|
Need some help here..
1. Cooler Master Elite 330 2. Cooler Master Praetorian PAC-T01 3. HEC 6C Series Budget is RM350 max. Thanks in advance. |
|
|
Apr 3 2007, 11:43 PM
|
Senior Member
644 posts Joined: Dec 2006
|
any suggestion for getting casing without PSU
budget max rm150. can get from lowyat.. |
|
|
Apr 4 2007, 12:37 AM
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
Still thinking of getting a balanced case (quiet and silent). Have been searching all over the net, and SPCR seems to write the most thorough review about silent computers. However, they 'seemed' a bit biased in their recommendations, or are they not?
Recommendations! What case should I get? |
|
|
Apr 4 2007, 12:47 AM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(vassalle @ Apr 4 2007, 12:37 AM) Still thinking of getting a balanced case (quiet and silent). Have been searching all over the net, and SPCR seems to write the most thorough review about silent computers. However, they 'seemed' a bit biased in their recommendations, or are they not? Wah! U really dat unhappy with the V1200 kar? Haf u tried using just 1 fan, the rear fan as exhaust? Like how I used for my old rig? Recommendations! What case should I get? |
|
|
Apr 4 2007, 01:09 AM
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
QUOTE(outdoorxplorer @ Apr 3 2007, 09:39 PM) Where to get a Lian-Li PC-V1200B Plus II in KL? in KL? of course at LYP..  |
|
|
Apr 4 2007, 01:10 AM
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
the review does not even covers any lian li case ????
what a waste .. they should review the silent case series men .. it's definitely quiet enough ... |
|
|
Apr 4 2007, 01:11 AM
|
|
Senior Member
2,239 posts Joined: Jun 2006 From: K.L
|
QUOTE(outdoorxplorer @ Apr 3 2007, 09:39 PM) Where to get a Lian-Li PC-V1200B Plus II in KL? buy from vassalle, he is selling it. LOL |
|
|
Apr 4 2007, 01:32 AM
|
Senior Member
847 posts Joined: Jan 2005
|
Ok...need to ask whether you guys on Good Casing and Bad Casing.
My casing is non-branded, chaplang brand, E-Mag, installed with 80mm exhaust fan, when I opened up my casing sidepanel, my system temperature drops 5degree. so, can i assume that this is a bad casing? So, can I also assume that a good casing with front and exhaust fan will maintain my system temperature, even when I remove the sidepanel? |
|
|
Apr 4 2007, 05:40 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
IMO probably ur case ain't got a good airflow since it just got 80mm fan + psu fan to suck out air. maybe u can mod it to add some intake fan. important thing is to make sure u got the air flowing correctly inside the case.
just my opinion.. |
|
|
Apr 4 2007, 08:15 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(blessedvillain @ Apr 4 2007, 01:32 AM) Ok...need to ask whether you guys on Good Casing and Bad Casing. Does your casing has intake fans?My casing is non-branded, chaplang brand, E-Mag, installed with 80mm exhaust fan, when I opened up my casing sidepanel, my system temperature drops 5degree. so, can i assume that this is a bad casing? So, can I also assume that a good casing with front and exhaust fan will maintain my system temperature, even when I remove the sidepanel? If not, then the exhaust fans is just a waste, plus, it's making your casing have a really really high negative airflow. No intake, but has exhaust.  |
|
|
Apr 4 2007, 09:09 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
??? No suggestion for RM 200~300 casing ???
Or this price can't get a casing for nice air flow ? |
|
|
Apr 4 2007, 10:30 AM
|
|
Senior Member
719 posts Joined: Nov 2006 From: :morF
|
QUOTE(dfcloud @ Apr 3 2007, 08:01 PM) need opinion about this 2 casing. help me pls.....tt soprano dx & tt armor jr soprano dx> armor jr or armor jr > soprano dx |
|
|
Apr 4 2007, 11:01 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(sHawTY @ Apr 4 2007, 08:15 AM) Does your casing has intake fans? Actually only the exhaust fan is not totally a waste, it managed to reduced some temperature.... I'm just wondering, with a good casing,with good airflow, the temperature of my system will be cooler or the same with the sidepanel taken off?...If not, then the exhaust fans is just a waste, plus, it's making your casing have a really really high negative airflow. No intake, but has exhaust. because right now, after i took off my side panel, my cpu temp dropped 5C degree! |
|
|
Apr 4 2007, 01:21 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
For me if i take off the side panel, my pc temperature will raise up 3~4 degree.
2 fans ( 9x9cm ) intake and 3 fans ( 12x12cm, pci fan, 9x9cm ) for exhaust. |
|
|
Apr 4 2007, 01:40 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(vincent09 @ Apr 4 2007, 01:21 PM) For me if i take off the side panel, my pc temperature will raise up 3~4 degree. Nice!! Hahaha...that means this proves that good airflow in the casing really helps!! Thanks! 2 fans ( 9x9cm ) intake and 3 fans ( 12x12cm, pci fan, 9x9cm ) for exhaust. I'm getting Coolermaster Elite 330. Any bad or good comments?? |
|
|
Apr 4 2007, 02:16 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Now need some one suggest on budget Rm 200~rm 300 also no reply,
open a new post also let ppl scold dont know english. Call me post here and ask here..... Ok , i waiting .... blessedvillain, that Coolermaster Elite 330 not bad ah, if infront can intake air go in more nice XD. This post has been edited by vincent09: Apr 4 2007, 02:19 PM |
|
|
Apr 4 2007, 02:17 PM
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
izit really big difference btw alu and SECC? I remember last time got ppl discuss bout it, full alu just not as heavy as SECC, but the temp wont have any big diff.... But alu can absorb heat more quickly, rite?....
 Btw, any good/bad comment for LL 007? |
|
|
Apr 4 2007, 02:22 PM
|
Junior Member
360 posts Joined: Dec 2005 From: Ampang / Kuantan
|
QUOTE(vincent09 @ Apr 4 2007, 02:16 PM) Now need some one suggest on budget Rm 200~rm 300 also no reply, Try to look for PowerLogic Atrix 5000, ALL IT selling it at RM160, the case can support up to 6 FAN. 2x8cm Front,1x9cm Rear,1x8cm TOP & 1x12cm & 1x8cm Side Panel.open a new post also let ppl scold dont know english. Call me post here and ask here..... Ok , i waiting .... |
|
|
Apr 4 2007, 02:30 PM
|
|
Senior Member
4,482 posts Joined: Jul 2005
|
QUOTE(vincent09 @ Apr 4 2007, 02:16 PM) Now need some one suggest on budget Rm 200~rm 300 also no reply, haha becoz rm200 - rm300 chasis kinda uncommon i shud say haha. anyway you could try this few.open a new post also let ppl scold dont know english. Call me post here and ask here..... Ok , i waiting .... blessedvillain, that Coolermaster Elite 330 not bad ah, if infront can intake air go in more nice XD. gigabyte - Poseidon/Triton(nt recomended) lian-li - rm298 http://www.lian-li.com/product/product05.p...ex=1&ss_index=4 but farking ugly to me. due to the 25cm fan beside. Coolermaster - cm5,531,532, comes with side panel look nice. cm elite 330,331 cheaper version of the coolermasters and also look decent. cm Ammo, easier for you to carry around Thermaltake - matrix(non-alu version), soprano, swing(cost slightly more). i dun like them HEC6919 - cheapest full tower i shud say rm188, dam heavy. sunbeam- da transparent case rm225 if nt mistaken. btw, i think got lots more, i-cute itself already a lot model. check out sum others at modernopc.com. online window shopping there. |
|
|
Apr 4 2007, 02:34 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vincent09 @ Apr 4 2007, 02:16 PM) Now need some one suggest on budget Rm 200~rm 300 also no reply, For RM300, you should consider yourself a Lian Li PC-007open a new post also let ppl scold dont know english. Call me post here and ask here..... Ok , i waiting .... blessedvillain, that Coolermaster Elite 330 not bad ah, if infront can intake air go in more nice XD. It's a very good full aluminium chasis. Official Website: http://www.lian-li.com/product/product06.p..._index=4&type=b Picture: -b.jpg) Much much better than those chapalang SECC chasis. |
|
|
Apr 4 2007, 02:53 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(dfcloud @ Apr 4 2007, 10:30 AM) need opinion about this 2 casing. Armor Jr! tt soprano dx & tt armor jr soprano dx> armor jr or armor jr > soprano dx help me pls..... |
|
|
Apr 4 2007, 02:57 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(dfcloud @ Apr 3 2007, 08:01 PM) need opinion about this 2 casing. None of them.tt soprano dx & tt armor jr soprano dx> armor jr armor jr > soprano dx Because: Thermaltake: EEEUUWWW!!!! This post has been edited by sHawTY: Apr 4 2007, 03:02 PM |
|
|
Apr 4 2007, 03:01 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Hahaha ... sHawTY is official LL supporter now ..
of course the thing is paying RM500 for SECC steel is a no no compare to Lian Li case that offer much more features... Of course out of the TT case mentioned .. i would said Armour JR Alu version is the best ... but compare the price against features... still LL case at that range outstanding .. the call is still up to the buyer ....visit ATE and see for urself ..then only can understand the beauty of KK.... This post has been edited by Doom: Apr 4 2007, 03:01 PM |
|
|
Apr 4 2007, 03:03 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Doom @ Apr 4 2007, 03:01 PM) Hahaha ... sHawTY is official LL supporter now .. True... of course the thing is paying RM500 for SECC steel is a no no compare to Lian Li case that offer much more features... Of course out of the TT case mentioned .. i would said Armour JR Alu version is the best ... but compare the price against features... still LL case at that range outstanding .. the call is still up to the buyer ....visit ATE and see for urself ..then only can understand the beauty of KK....  True... You can only understand the beauty of LL by touching and seeing it yourself. PS: Beside an official supporter of Lian-Li, i'm also a supproter for SOLDAM which i can never get in my hands. |
|
|
Apr 4 2007, 05:21 PM
|
|
Senior Member
719 posts Joined: Nov 2006 From: :morF
|
haih...
i think i choose armor jr la.. |
|
|
Apr 4 2007, 05:40 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
C those info first, got problem pm again.
But those casing can find in Low yat ? |
|
|
Apr 4 2007, 06:01 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vincent09 @ Apr 4 2007, 05:40 PM) C those info first, got problem pm again. What type of casing?But those casing can find in Low yat ? If you're talking about Lian Li, yes, it is available at Lowyat Plaza. Find ATE Computers, and feel the love on each of the Lian Li casing. Lian Li casings doesn't have those fancy schmancy desing like Thermaltake [EEUUWW!!!]. Lian Li design their casings to look smart and more to executive looks.  Thermaltake [EEUUWW!!! again] design their casings to look fancy schmancy like children toys. |
|
|
Apr 4 2007, 06:45 PM
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Apr 4 2007, 06:01 PM) What type of casing? Do you know where i could find the pricing for LL cases online?Thinking of getting one as well if i got the budget in the future..lol..If you're talking about Lian Li, yes, it is available at Lowyat Plaza. Find ATE Computers, and feel the love on each of the Lian Li casing. Lian Li casings doesn't have those fancy schmancy desing like Thermaltake [EEUUWW!!!]. Lian Li design their casings to look smart and more to executive looks. Thermaltake [EEUUWW!!! again] design their casings to look fancy schmancy like children toys. And just wondering, is that PC007B full alu?Kinda attracted to it since the price is good as well.Maybe its time to dump my C5..lol.. This post has been edited by akachester: Apr 4 2007, 06:47 PM |
|
|
Apr 4 2007, 07:27 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(akachester @ Apr 4 2007, 06:45 PM) Do you know where i could find the pricing for LL cases online?Thinking of getting one as well if i got the budget in the future..lol.. I don't think you can find any pricing for LL casing online. And just wondering, is that PC007B full alu?Kinda attracted to it since the price is good as well.Maybe its time to dump my C5..lol.. PC007B is full alu, dude, where got Lian Li casing got no full alu? |
|
|
Apr 4 2007, 07:38 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Apr 4 2007, 07:27 PM) I don't think you can find any pricing for LL casing online. lol..i dont know anything about LL casing before.Just realise how beautiful they are but the price as seen in those garage sales was PC007B is full alu, dude, where got Lian Li casing got no full alu? ..Seems so expensive..lol..But reading from the top, there is low end LL casing priced below RM300 which should be fine with me.Therefore, i kinda interested to get it..Too bad it has a big 24cm fan  Hate that..lol...Any version below RM300 that dont have that big fan but comes with side panel window? |
|
|
Apr 4 2007, 07:48 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(akachester @ Apr 4 2007, 07:38 PM) lol..i dont know anything about LL casing before.Just realise how beautiful they are but the price as seen in those garage sales was Dude, the one with that 24CM fan is the PC7 la.. ..Seems so expensive..lol..But reading from the top, there is low end LL casing priced below RM300 which should be fine with me.Therefore, i kinda interested to get it..Too bad it has a big 24cm fan Hate that..lol...Any version below RM300 that dont have that big fan but comes with side panel window? The PC007 [James Bond] doesn't come with that uber large fan liao. The PC007 shouldn't be more than RM300 IINM. This is PC-7BYCF: http://www.lian-li.com/product/product06.p..._index=4&type=b This is PC-007B: http://www.lian-li.com/product/product06.p..._index=4&type=b This post has been edited by sHawTY: Apr 4 2007, 07:50 PM |
|
|
Apr 4 2007, 07:50 PM
|
Junior Member
474 posts Joined: Jan 2003 From: Ampang @ http://himitsu.us
|
haha... shawty screams so many times.. lol!
I want to get A10 but its wayyy out of budget for now |
|
|
Apr 4 2007, 07:55 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Cyrus2k @ Apr 4 2007, 07:50 PM) haha... shawty screams so many times.. lol! Not scream la, it's more than want to puke when i hear thermaltake name. I want to get A10 but its wayyy out of budget for now A10? That's my previous dream casing. Now my dream casing is V1200B Plus II!!! |
|
|
Apr 4 2007, 07:58 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Apr 4 2007, 07:55 PM) Not scream la, it's more than want to puke when i hear thermaltake name. lol...I love the V1200B as well but damn, at that price point, i would have been broke.. A10? That's my previous dream casing. Now my dream casing is V1200B Plus II!!! Now i understand more about that LL..lol..About the PC007, does it come with sidepanel window?I wanted a sidepanel window as well...Below RM300 should be affordable with me but not for now..maybe a month time.. This post has been edited by akachester: Apr 4 2007, 07:58 PM |
|
|
Apr 4 2007, 08:04 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(akachester @ Apr 4 2007, 07:58 PM) lol...I love the V1200B as well but damn, at that price point, i would have been broke.. The PC-007 does not come with sidewindow. Now i understand more about that LL..lol..About the PC007, does it come with sidepanel window?I wanted a sidepanel window as well...Below RM300 should be affordable with me but not for now..maybe a month time.. |
|
|
Apr 4 2007, 08:06 PM
|
|
Junior Member
474 posts Joined: Jan 2003 From: Ampang @ http://himitsu.us
|
I don't think 007 comes with sidepanel... you will have to mod it or buy an additional sidepanel
My 2nd choice will be the Classical Silent series... but not sure about the price tag EDIT: Damn, the LL craz... err Shawty beats me to it This post has been edited by Cyrus2k: Apr 4 2007, 08:07 PM |
|
|
Apr 4 2007, 09:09 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
That pc-007 nice but if that side fan burn out got replace part ah ?
I dont c any fan like so big for selling ...... |
|
|
Apr 4 2007, 09:11 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
There are few models for classial silent types range from RM550+ ~RM767...
I like the PC-767 and B20 but too bad both cases does not work for me ... i need more air flow hich this two cases can't provides... |
|
|
Apr 4 2007, 09:30 PM
|
|
Senior Member
1,223 posts Joined: May 2006 From: Klang
|
im looking for raidmax ninja black or smilodon one where can i get it if i go 2 LYP?
n how much izzit??? |
|
|
Apr 4 2007, 09:30 PM
|
|
Senior Member
719 posts Joined: Nov 2006 From: :morF
|
QUOTE(sHawTY @ Apr 4 2007, 07:55 PM) Not scream la, it's more than want to puke when i hear thermaltake name. kesian la saya, saya baru hendak belajar UV modding(in bm?) bekas komputer. A10? That's my previous dream casing. Now my dream casing is V1200B Plus II!!! belanjawan saya kecik sahaja This post has been edited by dfcloud: Apr 4 2007, 09:30 PM |
|
|
Apr 4 2007, 09:33 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
I love this thermal take casing...BachVX
not sure malaysia have this model or not... http://www.thermaltake.com/product/Chassis...X/vf4000bws.asp |
|
|
Apr 4 2007, 10:06 PM
|
|
Junior Member
474 posts Joined: Jan 2003 From: Ampang @ http://himitsu.us
|
QUOTE(Doom @ Apr 4 2007, 09:11 PM) There are few models for classial silent types range from RM550+ ~RM767... Yeah.. had my eye on B20 I like the PC-767 and B20 but too bad both cases does not work for me ... i need more air flow hich this two cases can't provides... Now I need to wait for my pay day.. haha |
|
|
Apr 4 2007, 10:09 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vincent09 @ Apr 4 2007, 09:09 PM) That pc-007 nice but if that side fan burn out got replace part ah ? Dude, that's not PC-007, that's PC-7 I dont c any fan like so big for selling ...... PC-007 does not come with that fugly 24CM fan. PC-7 is the one that comes with that 24CM fan. |
|
|
Apr 4 2007, 10:14 PM
|
|
Senior Member
2,027 posts Joined: Jan 2003 From: Kuala Lumpur, MYS
|
TQVM, all my querries has been answered by ATE.
QUOTE(kalakatu @ Apr 4 2007, 01:09 AM) in KL? of course at LYP.. |
|
|
Apr 4 2007, 10:41 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
So did u buy any case today ??? or any case that u are looking forward to ....
|
|
|
Apr 4 2007, 10:47 PM
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
yo Doom...what happened to ur GT? sold off liao ah?
make use of the case man... as HTPC or torrent/ file server rig |
|
|
Apr 4 2007, 10:47 PM
|
|
Senior Member
2,027 posts Joined: Jan 2003 From: Kuala Lumpur, MYS
|
Very likely will pickup a v1000+ ii or v1200+ ii this friday with some accs...
QUOTE(Doom @ Apr 4 2007, 10:41 PM) So did u buy any case today ??? or any case that u are looking forward to .... |
|
|
Apr 4 2007, 10:52 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hoohohohoh ... i am thinking of getting the case this week also ..
anyway which color u are going to grab ??? besides, what accessories u would be getting ??? |
|
|
Apr 4 2007, 10:59 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
PC-7 is the one that comes with that 24CM fan.
Ok then i ask again, if that pc-7's 24 fans got problem, i can buy another 24 fans for it? I didn't c or maybe i didn't look properly is it got selling or not. |
|
|
Apr 4 2007, 11:34 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vincent09 @ Apr 4 2007, 10:59 PM) PC-7 is the one that comes with that 24CM fan. I believe the only way to get the answer for your question is to ask those guys at ATE Computers Lowyat Plaza. Ok then i ask again, if that pc-7's 24 fans got problem, i can buy another 24 fans for it? I didn't c or maybe i didn't look properly is it got selling or not. I'm not sure either you can find a replacement fan of that size, infact, i think it's impossible. |
|
|
Apr 5 2007, 12:22 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Just wondering, is the difference between the PC-7 and the PC-007 only at the sidepanel?From the look of the front design, it seems there aint much difference.If they are the same, i guess my best choice (if i am going to get this casing) would be getting the PC-7, take out that fugly 24cm fan, and replace it with a normal acrylic...Damn, i am starting to get addicted to LL...lol..
Anyway, just found this out.If any of you needed to know the price of LL casing in ATE, there is an updated price list at hardwarezone malaysia.Try finding it there... This post has been edited by akachester: Apr 5 2007, 12:25 AM |
|
|
Apr 5 2007, 12:54 AM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(akachester @ Apr 5 2007, 12:22 AM) Just wondering, is the difference between the PC-7 and the PC-007 only at the sidepanel?From the look of the front design, it seems there aint much difference.If they are the same, i guess my best choice (if i am going to get this casing) would be getting the PC-7, take out that fugly 24cm fan, and replace it with a normal acrylic...Damn, i am starting to get addicted to LL...lol.. Just went to find out at hardwarezone.com, the ATE price list was the last week 1, not the latest.... Anyway, just found this out.If any of you needed to know the price of LL casing in ATE, there is an updated price list at hardwarezone malaysia.Try finding it there...  |
|
|
Apr 5 2007, 01:31 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
If there's no major changes to the price list i think they update it twice a week ,,, just my sense ... the best way still to visit them and grab the paper price list from they ..
there's no difference for PC-7 and PC-007 in term of internal structure ... my sense ... |
|
|
Apr 5 2007, 02:02 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(dfcloud @ Apr 4 2007, 09:30 PM) kesian la saya, saya baru hendak belajar UV modding(in bm?) bekas komputer. case TT mahal jugak. belanjawan saya kecik sahaja LL nye case lagi mahal, tapi ada promotion ari tu, so sme orang ckp psal LL PC-G7 & PC-007.. tapi, serius Armor Series tu lawa beb! go for your own style dude!QUOTE(blessedvillain @ Apr 4 2007, 09:33 PM) I love this thermal take casing...BachVX nvr saw this case b4.. pretty sleek.. not sure malaysia have this model or not... http://www.thermaltake.com/product/Chassis...X/vf4000bws.asp QUOTE(Doom @ Apr 4 2007, 10:52 PM) hoohohohoh ... i am thinking of getting the case this week also .. sorry which case r u thinking Doom? ~im curious.. hehe anyway which color u are going to grab ??? besides, what accessories u would be getting ??? |
|
|
Apr 5 2007, 02:47 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
V1000B Plus II bro .... sexy, elegant in black finishing ...
somehow still have dilema of setting the wiring if to get the case,, |
|
|
Apr 5 2007, 04:13 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
whoa nice pick Doom! i just love cases with partitioned/compartmented psu. i saw someone got bezel with holes to match the case. just like the a16 bezel.
post up pic of the case real quick ok bro! can't wait to see it! pros here sure can help with the wiring things.. |
|
|
Apr 5 2007, 07:15 AM
|
|
Senior Member
719 posts Joined: Nov 2006 From: :morF
|
QUOTE(nazerry @ Apr 5 2007, 02:02 AM) case TT mahal jugak. hehe, tima kaseh.. LL nye case lagi mahal, tapi ada promotion ari tu, so sme orang ckp psal LL PC-G7 & PC-007.. tapi, serius Armor Series tu lawa beb! go for your own style dude!hujung minggu ni dapat la kot |
|
|
Apr 5 2007, 07:31 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Just wondering, how do we know whether a casing is going to fit an ATX mobo or its design to fit the mATX version?
Is the V600 able to fit an ATX mobo?Cause from their website, they state that it will fit P4 mobo and ATX but from ATE's price list, its categorized as mATX.. |
|
|
Apr 5 2007, 07:46 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
ATX < is what ??
May i know the ATE computer shop in LY is near where ? |
|
|
Apr 5 2007, 08:17 AM
|
|
Senior Member
2,027 posts Joined: Jan 2003 From: Kuala Lumpur, MYS
|
QUOTE(vincent09 @ Apr 5 2007, 07:46 AM) ATX < is what ?? I wanna to know too. Visiting ATE today..May i know the ATE computer shop in LY is near where ? |
|
|
Apr 5 2007, 08:23 AM
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(akachester @ Apr 5 2007, 07:31 AM) Just wondering, how do we know whether a casing is going to fit an ATX mobo or its design to fit the mATX version? V600 fits all ATX & m-ATX mobo, ATE price list --> wrong Is the V600 able to fit an ATX mobo?Cause from their website, they state that it will fit P4 mobo and ATX but from ATE's price list, its categorized as mATX.. usually it's kinda hard for the manufacturer itself to state wrong things about their products  cause posting the product details isn't easy --> going through several process (which if got any error will be detected at any stage)QUOTE(vincent09 @ Apr 5 2007, 07:46 AM) ATX < is what ?? May i know the ATE computer shop in LY is near where ? QUOTE(outdoorxplorer @ Apr 5 2007, 08:17 AM) I wanna to know too. Visiting ATE today.. ATE shop --> third floor from the TOP floorwhere? u have to look around for it |
|
|
Apr 5 2007, 08:25 AM
|
|
Senior Member
2,239 posts Joined: Jun 2006 From: K.L
|
QUOTE(vincent09 @ Apr 5 2007, 07:46 AM) ATX < is what ?? May i know the ATE computer shop in LY is near where ? QUOTE The ATX (for Advanced Technology Extended) form factor was created by Intel in 1995. It was the first big change in computer case and motherboard design in many years. ATX overtook AT completely as the default form factor for new systems. ATX addressed many of the AT form factor's annoyances that had frustrated system builders. Other standards for smaller boards (including microATX, FlexATX and mini-ITX) usually keep the basic rear layout but reduce the size of the board and the number of expansion slot positions. In 2003, Intel announced the new BTX standard, intended as a replacement for ATX. As of January 2007 the ATX form factor remains the industry standard for do-it-yourselfers; BTX has however made inroads into pre-made systems, being adopted by computer makers like Dell, Gateway, and HP. source: http://en.wikipedia.org/wiki/ATXThe official specifications were released by Intel in 1995, and have been revised numerous times since, the most recent being version 2.2[1], released in 2004. A full size ATX board is 12" wide by 9.6" deep (305 mm x 244 mm). This allows many ATX form factor chassis to accept microATX boards as well. |
|
|
Apr 5 2007, 09:01 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
outdoorxplorer can tungpang help me c c what LL casing selling at ATE there XD.
ATX means reduce the casing board and keep the layout suitable to slot in those hardware insde. Ic, i though casing more spacing = nice air flow... |
|
|
Apr 5 2007, 09:07 AM
|
|
Senior Member
2,027 posts Joined: Jan 2003 From: Kuala Lumpur, MYS
|
I am looking at V Series Plus II and confirm 1200, 1200 & 2000 is in stock.
QUOTE(vincent09 @ Apr 5 2007, 09:01 AM) outdoorxplorer can tungpang help me c c what LL casing selling at ATE there XD. ATX means reduce the casing board and keep the layout suitable to slot in those hardware insde. Ic, i though casing more spacing = nice air flow... |
|
|
Apr 5 2007, 09:16 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(vincent09 @ Apr 5 2007, 09:01 AM) outdoorxplorer can tungpang help me c c what LL casing selling at ATE there XD. more spacing doesn't mean it got nicer air flow, air flow doesn't depends on your casing size, small casing also can have better air flow than bigger casing...ATX means reduce the casing board and keep the layout suitable to slot in those hardware insde. Ic, i though casing more spacing = nice air flow... a good air flow determines by how well u managed ur cable inside (so it doesn't restrict air flow) & what type of fan u using the fans u using are actually resulting a significant air flow resultif using 100cfm intake & exhaust fan: --> ur case will have 100 cubic feet of fresh air going inside ur casing every minute --> ur case will let 100 cubic feet of hot air out of ur casing every minute |
|
|
Apr 5 2007, 09:21 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
managed ur cable inside ?
hmm this i havnt c before, check cooling post just show picture that without c the cable, all hiding it. Don't know those guys how to do it. |
|
|
Apr 5 2007, 09:27 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(vincent09 @ Apr 5 2007, 09:21 AM) managed ur cable inside ? hmm this i havnt c before, check cooling post just show picture that without c the cable, all hiding it. Don't know those guys how to do it. they all hides the cable at the 5" bay drive --> that's why u don't see em |
|
|
Apr 5 2007, 12:48 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
hmm i go check around, at cooling there c got guide for that or not.
I just know my pc can't do that because is a normal casing. Added on April 5, 2007, 1:03 pmPC-7BYCF and PC-007B price is it nearly big different ? PC-7BYCF and PC-007B is it can use other PSU ? This post has been edited by vincent09: Apr 5 2007, 01:03 PM |
|
|
Apr 5 2007, 02:33 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
I am interested in this 2 models as well.If any of you know the price, please do inform here ok..
PC-7BYCF and PC-007B |
|
|
Apr 5 2007, 03:27 PM
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
ATE is located at 2nd floor, very near the OP
|
|
|
Apr 5 2007, 03:35 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vincent09 @ Apr 5 2007, 12:48 PM) PC-7BYCF and PC-007B price is it nearly big different ? Just go there and find it out for yourself.PC-7BYCF and PC-007B is it can use other PSU ? Easy. |
|
|
Apr 5 2007, 04:53 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Thanks Zicron, find 1 day go check check.
|
|
|
Apr 5 2007, 05:20 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(vincent09 @ Apr 5 2007, 04:53 PM) Thanks Zicron, find 1 day go check check. When u go there, be sure to look for billy |
|
|
Apr 5 2007, 05:30 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Just now look some Lian li casing on web, some air flow interesting, back fan also intake air go in....
pc-G7 not bad ah XD. Some i still don't understand, infront got fan and without hole how to intake air go in ? |
|
|
Apr 5 2007, 07:43 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(vincent09 @ Apr 5 2007, 05:30 PM) Just now look some Lian li casing on web, some air flow interesting, back fan also intake air go in.... Yea, i have this doubt as well.There are some casing that have a cover at the front without any ventilation holes but there is a front intake fan.How do they actually provide the air for intake?Casings like the LL PC-A10 (IINM) have front plate to cover those roms slot etc.pc-G7 not bad ah XD. Some i still don't understand, infront got fan and without hole how to intake air go in ? |
|
|
Apr 5 2007, 08:18 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vincent09 @ Apr 5 2007, 05:30 PM) Just now look some Lian li casing on web, some air flow interesting, back fan also intake air go in.... pc-G7 not bad ah XD. Some i still don't understand, infront got fan and without hole how to intake air go in ? QUOTE(akachester @ Apr 5 2007, 07:43 PM) Yea, i have this doubt as well.There are some casing that have a cover at the front without any ventilation holes but there is a front intake fan.How do they actually provide the air for intake?Casings like the LL PC-A10 (IINM) have front plate to cover those roms slot etc. Look at the side of the PC-G7 properly, and you'll see a lot of ventilation holes that lets the air move in.And on the lower part of the front panel, there's a huge gap that serves as a vent to let the air in. |
|
|
Apr 5 2007, 08:45 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Ic... that G7 not bad leh, more expensive than pc-7 ?
|
|
|
Apr 5 2007, 08:54 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
nope .. .G7 was priced at Rm198 during the promotion period ...
but too bad there's no more stock and production so far ... |
|
|
Apr 5 2007, 10:26 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(vincent09 @ Apr 5 2007, 08:45 PM) Ic... that G7 not bad leh, more expensive than pc-7 ? The G7 seems to be the cheapest LL available as far as i can see..But not sure whether ATE still have them or not cause i am really tempted.Damn, if only i could have my budget earlier.. |
|
|
Apr 5 2007, 10:38 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vincent09 @ Apr 5 2007, 08:45 PM) Ic... that G7 not bad leh, more expensive than pc-7 ? It's the cheapest casing from all Lian Li lines of casing. But too bad that you won't be able to get it at the RM198 price anymore, as the promotion is over, and the stocks is finished too. QUOTE(akachester @ Apr 5 2007, 10:26 PM) The G7 seems to be the cheapest LL available as far as i can see..But not sure whether ATE still have them or not cause i am really tempted.Damn, if only i could have my budget earlier.. Nope, they don't have it anymore. |
|
|
Apr 5 2007, 10:59 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
For me i like the G7 is because some features like > easy assembling Hdd, the side fan also cool.
Got any LL casing near feature like that ? |
|
|
Apr 6 2007, 12:44 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm ... so far LL has been working on case that with more futuristic look rather than like G7 ....
maybe u could email them and ask about it .... |
|
|
Apr 6 2007, 12:56 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
I see, well i go check around at ATE first then buy from there, just waiting to buy new pc....
|
|
|
Apr 6 2007, 01:00 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
How about the 007?Do ATE still have those?I still cant consider those high end, uber expensive LL.If not, i would need to abandon the ambition of owning a LL..lol...
|
|
|
Apr 6 2007, 01:04 AM
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(akachester @ Apr 6 2007, 01:00 AM) How about the 007?Do ATE still have those?I still cant consider those high end, uber expensive LL.If not, i would need to abandon the ambition of owning a LL..lol... for 007...ATE still got them...  better hurryyyyy... |
|
|
Apr 6 2007, 01:06 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(fo33il @ Apr 6 2007, 01:04 AM) for 007...ATE still got them... Oh..My.... better hurryyyyy... Then this is too tempting. And i thought i wanted 1month to get the budget and buy the casing..Damn..  |
|
|
Apr 6 2007, 01:25 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
There still have more of the stock and today i saw someone bought one silver unit ...
fast fast before stock run out ... !! |
|
|
Apr 6 2007, 01:28 AM
|
|
Junior Member
386 posts Joined: Sep 2006
|
How much is the 007? It doesn't have the ugly 25cm fan right?
Can it fit a 8800gtx? |
|
|
Apr 6 2007, 02:03 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Too bad it does come with the large side fan ....
yah it can but a bit restricted for the HDD area... or u could use a HDD cooler and move the HDD to optical drive area... |
|
|
Apr 6 2007, 06:42 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(unamed @ Apr 6 2007, 01:28 AM) How much is the 007? It doesn't have the ugly 25cm fan right? RM298Can it fit a 8800gtx? Doom, correct me if i'm wrong. That's the correct price right? |
|
|
Apr 6 2007, 08:12 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Because of ATX, so what we need to care if buy LL casing?
Like inside enought space to put many pci card or those big big cpu fans inside or something like that problem ? |
|
|
Apr 6 2007, 08:34 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vincent09 @ Apr 6 2007, 08:12 AM) Because of ATX, so what we need to care if buy LL casing? Make it simple.Like inside enought space to put many pci card or those big big cpu fans inside or something like that problem ? If a casing can fit ATX, it can fit various types of board from Mini ATX, Micro ATX to Full Size ATX but not extended ATX. Full size ATX board has 7 slots that consists of mixed PCI-E, PCI, or AGP slot, it depend on your motherboard itself. Normally all Lian Li casings can fit any types of heatsink fan. Except for those casings that are made for HTPC setups. **Extended ATX boards are a very rare occasion. The easiest way to find out is to give us the model of your motherboard. This post has been edited by sHawTY: Apr 6 2007, 08:34 AM |
|
|
Apr 6 2007, 08:44 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
LL PC-007 + transparent window + 25cm fan (ayyo..
) = RM288 |
|
|
Apr 6 2007, 09:13 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(nazerry @ Apr 6 2007, 08:44 AM) LL PC-007 + transparent window + 25cm fan (ayyo.. You don't want that 25CM fan?) = RM288Easy. Take out the sidepanle that comes with the 25CM fan, buy a new arcylic in any advertisement makers shops, cut the new arcylic to the same size of the original arcylic that comes with the LL casing, then put the new arcylic on the sidepanel back, then wallah! This post has been edited by sHawTY: Apr 6 2007, 09:14 AM |
|
|
Apr 6 2007, 09:18 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Apr 6 2007, 09:13 AM) You don't want that 25CM fan? Yea, thats what i had been thinking as well.I dont want that 25cm fan but asking me to cut an acrylic seems Easy. Take out the sidepanle that comes with the 25CM fan, buy a new arcylic in any advertisement makers shops, cut the new arcylic to the same size of the original arcylic that comes with the LL casing, then put the new arcylic on the sidepanel back, then wallah! ..lol...Maybe i just go ahead and ask people to do it for me..lol..EDITED: Actually from ATE's price list, they list down the PC-007 as a version that comes with side panel and a 25cm fan.Does this means that the casing is actually the PC-7? This post has been edited by akachester: Apr 6 2007, 09:23 AM |
|
|
Apr 6 2007, 09:26 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(akachester @ Apr 6 2007, 09:18 AM) Yea, thats what i had been thinking as well.I dont want that 25cm fan but asking me to cut an acrylic seems You're in PJ dude, just send your sidepanel to ianho and get yourself a new sidewindow that doesn't have that fugly fan. ..lol...Maybe i just go ahead and ask people to do it for me..lol..EDITED: Actually from ATE's price list, they list down the PC-007 as a version that comes with side panel and a 25cm fan.Does this means that the casing is actually the PC-7? Plus, u can also ask him to make you a sidewindow with a smaller fan either 80mm, 92mm or 120mm. |
|
|
Apr 6 2007, 09:29 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Apr 6 2007, 09:26 AM) You're in PJ dude, just send your sidepanel to ianho and get yourself a new sidewindow that doesn't have that fugly fan. Great idea as well.Wondering how much would that cost..Will need to find him later i guess if i really buy that.But need to wait another 1-2 weeks before i could get them.Anyway, is having a side fan recommended?I mean, it makes alot of difference in term of airflow and temperature? Plus, u can also ask him to make you a sidewindow with a smaller fan either 80mm, 92mm or 120mm. This post has been edited by akachester: Apr 6 2007, 09:30 AM |
|
|
Apr 6 2007, 09:40 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(akachester @ Apr 6 2007, 09:29 AM) Anyway, is having a side fan recommended?I mean, it makes alot of difference in term of airflow and temperature? Yes!You know that the PC-G7 has the sidepanel fan right? I made the sidepanel fan as intake [originally, it's exhaust] to cool my 8800, and to my surprise, my 8800 were 5 degrees cooler compared to if the sidepanel fan were not there. So, it's up to you either you want to put fan there or not, but if i were you, i'd put a blowhole on the sidepanel to blow directly to my GFX. |
|
|
Apr 6 2007, 09:54 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Apr 6 2007, 09:40 AM) Yes! Great.Thanks for the idea..I guess all i need to do now is find $$$ and get that LL...You know that the PC-G7 has the sidepanel fan right? I made the sidepanel fan as intake [originally, it's exhaust] to cool my 8800, and to my surprise, my 8800 were 5 degrees cooler compared to if the sidepanel fan were not there. So, it's up to you either you want to put fan there or not, but if i were you, i'd put a blowhole on the sidepanel to blow directly to my GFX. |
|
|
Apr 6 2007, 11:35 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
How bout if i say like that, LL casing now just like normal casing can fit all thing inside?
|
|
|
Apr 6 2007, 01:04 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
I would say, if wasnt for the Aluminium body of the LL, i dont think i will consider the lower end of LL casing..
|
|
|
Apr 6 2007, 02:18 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Hehee i scare got $$$ buy but no stock let me buy more ........*cry*...
I have measure the size of pc-7 just bigger than my old pc casing 1~2 cm XD. Still ok if that size, i though is smaller than my old 1 XD. This post has been edited by vincent09: Apr 6 2007, 02:22 PM |
|
|
Apr 6 2007, 03:19 PM
|
|
Senior Member
2,027 posts Joined: Jan 2003 From: Kuala Lumpur, MYS
|
Got my Lian-Li PC-V1000B Plus II from ATE LYP yesterday. It was a last demo unit and my earlier intention was a V1200B Pluss II but no stock too. Peripherals were transferred rom CM WaveMaster yesterday and cable management completed today.
Another Proud LL Owner in Town. |
|
|
Apr 6 2007, 06:01 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
outdoorxplorer so nice XD.
Hmm dont know still got other stock like pc-7 or g7 or not. |
|
|
Apr 6 2007, 06:26 PM
|
|
Junior Member
386 posts Joined: Sep 2006
|
What time does ATE operates their store in lowyat? Are they open everyday?
|
|
|
Apr 6 2007, 06:53 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(vincent09 @ Apr 6 2007, 06:01 PM) outdoorxplorer so nice XD. Many people have said that the PC-G7 is already out of stock at ATE and they would not restock it as it had discontinued production already.Thats why i turn my attention to the PC-007...Hmm dont know still got other stock like pc-7 or g7 or not. |
|
|
Apr 6 2007, 07:24 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(unamed @ Apr 6 2007, 06:26 PM) What time does ATE operates their store in lowyat? Are they open everyday? Yeap, ATE opens eviday, from 11-8, I think |
|
|
Apr 6 2007, 09:41 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
G7 is definitely no stock and 007 still ok ..
ATE open daily from 11 to 8 pm ..some times longer ... grab it fast for which ever casing ,,, or have to wait slowly for the special orders... |
|
|
Apr 6 2007, 10:50 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
now still waiting pc drop price, hope that day got stock XD or just get other casing if no LL at ATE.
|
|
|
Apr 6 2007, 11:56 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
They would be restock this month ... around 100 more cases arriving ...
only thing's whether the case arrived includes those that u wanted or not ... |
|
|
Apr 7 2007, 12:27 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Just wondering, is the 007 still in production?If it is, then i guess they would still be able to order them right if its out of stock?
|
|
|
Apr 7 2007, 12:37 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
yah ,, u got to ask them personally then ....
|
|
|
Apr 7 2007, 05:28 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(sHawTY @ Apr 6 2007, 09:13 AM) You don't want that 25CM fan? Easy. Take out the sidepanle that comes with the 25CM fan, buy a new arcylic in any advertisement makers shops, cut the new arcylic to the same size of the original arcylic that comes with the LL casing, then put the new arcylic on the sidepanel back, then wallah! QUOTE(akachester @ Apr 6 2007, 09:29 AM) Great idea as well.Wondering how much would that cost..Will need to find him later i guess if i really buy that.But need to wait another 1-2 weeks before i could get them.Anyway, is having a side fan recommended?I mean, it makes alot of difference in term of airflow and temperature? the best thing about Lian Li transparent side panel is that the acrylic is riveted...it's easy to get it off, wait till u want to put em back --> the acrylic will crack wanna use screws, fine wait till how fugly it looks remember my black parade, the transparent side panel should have been riveted, but somehow Ianho couldn't do it, cause the acrylic crack, dunno if he got a new method solving it so Ianho, already found the solution??? i bet lotsa ppl gonna send their 007 to replace with a new acrylicThis post has been edited by E-J@1: Apr 7 2007, 05:34 AM |
|
|
Apr 7 2007, 08:37 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(E-J@1 @ Apr 7 2007, 05:28 AM) the best thing about Lian Li transparent side panel is that the acrylic is riveted... Well, then that should be a trouble eh it's easy to get it off, wait till u want to put em back --> the acrylic will crack wanna use screws, fine wait till how fugly it looks remember my black parade, the transparent side panel should have been riveted, but somehow Ianho couldn't do it, cause the acrylic crack, dunno if he got a new method solving it so Ianho, already found the solution??? i bet lotsa ppl gonna send their 007 to replace with a new acrylic Was really hoping to get this next week an join the Ah Lian's Club if my budget arrives..lol..Any other cheap LL casing besides teh G7 and 007? |
|
|
Apr 7 2007, 08:56 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Hope ATE will get the new stock lo, nothing can do XD.
Besides LL got other suggestion? Just around rm200~rm300 and with nice a flow . |
|
|
Apr 7 2007, 12:27 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(akachester @ Apr 7 2007, 08:37 AM) Well, then that should be a trouble eh There's other smaller size LL case with good built quality and new features such as A05 and V300 .... Was really hoping to get this next week an join the Ah Lian's Club if my budget arrives..lol..Any other cheap LL casing besides teh G7 and 007?if u don't use too many stuffs these two cases should be able to handle it well enough ... the price wise is slightly over RM 300 and below RM400 I am going to help my friend to get the A05 for his new rig in the upcoming month .. QUOTE(vincent09 @ Apr 7 2007, 08:56 AM) Hope ATE will get the new stock lo, nothing can do XD. For that amount of budget of course u could get nice case from CM and Gigabyte ...Besides LL got other suggestion? Just around rm200~rm300 and with nice a flow . the only thing is those are SECC steel cases and have difficulty in managing the cables..... it will take lots of hard work to get the cable management done .. that's one of the main reason i abandoned my CM530 and become the lover of LL ... it just so close to perfection ... This post has been edited by Doom: Apr 7 2007, 12:28 PM |
|
|
Apr 7 2007, 01:57 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Is the 007 good for cable management?I am having trouble doing good cable management with my C5 and i would hope that my next casing would be easier..I noticed about the A05 as well but its too small to my liking.I had considered the V600 before but after seeing the casing in ianho's MiniMe, i decided to give it about for the reason of having the PSU almost clashing with the mobo..
|
|
|
Apr 7 2007, 02:35 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Scare when i want to buy and no stock only, 7 or 007 is ok to me.
|
|
|
Apr 7 2007, 03:11 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmmm ... 007 has good internal for cable management ... the only weakness is the HDD cage is not easy maintain as compared to G7 ..
u could check out the Lian Li thread for picture of G7 ... then determine urself ... for me 007 and G7 is one of the easist case in doing nice cable management of course G7 still is the winner with the betrer HDD cage design ... |
|
|
Apr 7 2007, 03:16 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
if got easy assembling hdd or hardware also nice.
G7 no stock liao, so no need to get lo. no choice then just go 7 or 007 only. Who also know G7 is nice. XD This post has been edited by vincent09: Apr 7 2007, 03:17 PM |
|
|
Apr 7 2007, 03:23 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(Doom @ Apr 7 2007, 03:11 PM) hmmm ... 007 has good internal for cable management ... the only weakness is the HDD cage is not easy maintain as compared to G7 .. Ok.If thats the case, the 007 would be my best choice as of now.If any of you did went to ATE, please do inform me regarding the price and availability of it as i might be going there next weekend to purchase one... u could check out the Lian Li thread for picture of G7 ... then determine urself ... for me 007 and G7 is one of the easist case in doing nice cable management of course G7 still is the winner with the betrer HDD cage design ... |
|
|
Apr 7 2007, 03:23 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Even with 007 cable management can be done without sweathing so much ....
or maybe u could grab a HDD cooler than u could just remove the HDD cage... it also reduce the air flow to the gc area. . . . |
|
|
Apr 7 2007, 03:29 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
I'm sure this month april i won't go low yat, that's y need tumpang ppl go there help for c still go t what stock left.
|
|
|
Apr 7 2007, 03:45 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
ic ic .... u could just call them up to check out the stock availability loh ...
no need to go personally unless u want to touch and feel the case in person ... what i usually do before getting a case ... . |
|
|
Apr 7 2007, 05:25 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(Doom @ Apr 7 2007, 03:23 PM) Even with 007 cable management can be done without sweathing so much .... the hdd cage can be remove...the cage using rivet rite...is there any other LL cage that can replace the stock hdd cage? or maybe u could grab a HDD cooler than u could just remove the HDD cage... it also reduce the air flow to the gc area. . . . i'm asking coz still dont put my hardware into the GT,might want to wait till buying SS Psu...  |
|
|
Apr 7 2007, 05:30 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm .yes it is installed with rivet ... i am not sure about the replacement HDD cage ... some how i have seen before in other forum that the fellor replace with 90 degree HDD cage ...
dont know where he got it from ... |
|
|
Apr 7 2007, 05:46 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(Doom @ Apr 7 2007, 05:30 PM) hmm .yes it is installed with rivet ... i am not sure about the replacement HDD cage ... some how i have seen before in other forum that the fellor replace with 90 degree HDD cage ... hmm...looks like i'll hv to do more research with hdd cage... dont know where he got it from ... i think the G7's hdd case is more better then 007's... |
|
|
Apr 8 2007, 02:27 AM
|
|
Junior Member
386 posts Joined: Sep 2006
|
I want to go get a 007 too since it's consireably cheap for being fully aluminium!
But i can't drive yet! How to get there tru public transport(rapidkl, LRT)? Is it possible for me to get that casing to subang using public transport? |
|
|
Apr 8 2007, 03:22 AM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(unamed @ Apr 8 2007, 02:27 AM) I want to go get a 007 too since it's consireably cheap for being fully aluminium! off course u can But i can't drive yet! How to get there tru public transport(rapidkl, LRT)? Is it possible for me to get that casing to subang using public transport? ....u can take subang komuter to kl sentral...then walk through brickfields monorail to plaza imbi station (if not mistaken)...tada!!!now u are around bb... if using rapidkl transportation..erm,i'm not quite sure... go go go...take the 007 |
|
|
Apr 8 2007, 03:35 AM
|
|
Junior Member
386 posts Joined: Sep 2006
|
QUOTE(fo33il @ Apr 8 2007, 03:22 AM) off course u can Is that the best way? I used Google Earth and it's an estimated 1.76miles from KL Sentral to Lowyat direct route which will be further by foot. What about the Bukit Bintang monorail station? What services does it provide LRT or KTM? ....u can take subang komuter to kl sentral...then walk through brickfields monorail to plaza imbi station (if not mistaken)...tada!!!now u are around bb... if using rapidkl transportation..erm,i'm not quite sure... go go go...take the 007  |
|
|
Apr 8 2007, 03:46 AM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(unamed @ Apr 8 2007, 03:35 AM) Is that the best way? I used Google Earth and it's an estimated 1.76miles from KL Sentral to Lowyat direct route which will be further by foot. What about the Bukit Bintang monorail station? What services does it provide LRT or KTM? UGPM bro, i think better tell u thru pm....coz this is a lil bit off topic... |
|
|
Apr 8 2007, 07:39 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(unamed @ Apr 8 2007, 02:27 AM) I want to go get a 007 too since it's consireably cheap for being fully aluminium! Take the monorail in imbi to KL sentral, then, from kl sentral, use komuter to komuter subang, and wallah! But i can't drive yet! How to get there tru public transport(rapidkl, LRT)? Is it possible for me to get that casing to subang using public transport? You got yourself a PC-007 and u have arrive subang safely.  |
|
|
Apr 8 2007, 04:59 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Hmm besides LL casing, got other suggestion ? like cooler master, icute or other.
|
|
|
Apr 8 2007, 05:32 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
go for thermaltake case! the sweeet armor series!
|
|
|
Apr 8 2007, 09:38 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(fo33il @ Apr 7 2007, 05:25 PM) the hdd cage can be remove...the cage using rivet rite...is there any other LL cage that can replace the stock hdd cage? GT??? u got the GT?? did Doom sell the GT?? or u bought urself?? i'm asking coz still dont put my hardware into the GT,might want to wait till buying SS Psu... |
|
|
Apr 8 2007, 09:57 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
i soldemy GT to him as i am using LLV1000 now ...
i dont want to occupy the room with lots of cases lying around .. |
|
|
Apr 8 2007, 10:00 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
ooooooooo...in that case...
fo33il, welcome to the elite group of GT owners!! why elite? because its just the 2 of us!!! can tendang Doom out liao |
|
|
Apr 8 2007, 10:07 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
yah and now is his turn to join the 'My new Toys' thread ....
It has been no update so far since my last update... The tradition my carry on passing from one generation to another ... This post has been edited by Doom: Apr 8 2007, 10:08 PM |
|
|
Apr 8 2007, 10:10 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
yahor.....me oso gotta update that thread... coz i got myself ANOTHER new toy
me in Singapore now. will be driving back to KL tomorrow |
|
|
Apr 8 2007, 11:06 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(mADmAN @ Apr 8 2007, 10:00 PM) ooooooooo...in that case... fo33il, welcome to the elite group of GT owners!! why elite? because its just the 2 of us!!! can tendang Doom out liao i guess its not group yet...its just couple...huahaha i've to introduce myself in that case,i'm fo33il...new member of GT owner's club.. mADmAN: wat casing that u hunting in sg? Doom: will try to carry on the GT tradition This post has been edited by fo33il: Apr 8 2007, 11:08 PM |
|
|
Apr 9 2007, 09:16 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
New casing from ASSUS.
ASUS TS-8B Official Website: http://www.asus.com/products4.aspx?l1=7&l2...604&modelmenu=1 Pictah:  ASUS TS-8A Official Website: http://www.asus.com/products4.aspx?l1=7&l2...601&modelmenu=1 Pictah:  |
|
|
Apr 9 2007, 02:53 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
@sHawTY ...
what's so nice about this case besides it's small size ??? Are u considering to do a bulk or just to give some alternative to the forumer here ..... |
|
|
Apr 9 2007, 03:08 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Ai this post all about LL now only c other casing here XD.
|
|
|
Apr 10 2007, 09:57 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
Guys,
Do you have any comments on this HEC 6A34. http://www.hec-group.com.tw/model.php?cate..._tower&model=6a Attached image(s)  |
|
|
Apr 10 2007, 10:17 AM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(blessedvillain @ Apr 10 2007, 09:57 AM) Guys, Standard utilitarian casing lor... Works like any casing would but nothing really exciting.Do you have any comments on this HEC 6A34. http://www.hec-group.com.tw/model.php?cate..._tower&model=6a |
|
|
Apr 10 2007, 10:26 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(sniper on the roof @ Apr 10 2007, 10:17 AM) Standard utilitarian casing lor... Works like any casing would but nothing really exciting. May I know which is exciting casing? Still not sure wat casing to get for average budget. I'm not looking for fancy, pancy casing, just a good casing with good airflow (12cm fan) and silent. |
|
|
Apr 10 2007, 10:40 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Doom @ Apr 9 2007, 02:53 PM) @sHawTY ... Nothing, i just post about that casing here, afterall, this is a casing recommandation thread right? what's so nice about this case besides it's small size ??? Are u considering to do a bulk or just to give some alternative to the forumer here ..... QUOTE(blessedvillain @ Apr 10 2007, 10:26 AM) May I know which is exciting casing? Still not sure wat casing to get for average budget. I'm not looking for fancy, pancy casing, just a good casing with good airflow (12cm fan) and silent. All LL casing is exciting, it doesn't have the "fancy schmancy" design.All LL casing design is smart and cool, it have the executive look. This post has been edited by sHawTY: Apr 10 2007, 10:41 AM |
|
|
Apr 10 2007, 10:55 AM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(blessedvillain @ Apr 10 2007, 10:26 AM) May I know which is exciting casing? Still not sure wat casing to get for average budget. I'm not looking for fancy, pancy casing, just a good casing with good airflow (12cm fan) and silent. Hahaha... its a geek thing. In essence, a case a just a metal box so basically everything works more or less the same. Exciting in this case means... perhaps more exotic material like aluminum, some non-conventional internal layout or for some folks fancy pancy bling etc... or |
|
|
Apr 10 2007, 01:06 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Understanding the design of the case in term of air flow and structure as well as component inside is the key of getting the right case ...
always look into air flow issue first ... as u can't go wrong with it ... |
|
|
Apr 10 2007, 01:57 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
The airflow of the HEC 6A34 should be fine I think? It's around RM180, not considered too cheap...
This post has been edited by blessedvillain: Apr 10 2007, 01:57 PM |
|
|
Apr 10 2007, 07:56 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Yah it's good enough for general PC ... as long as not with very hot graphic card ...
the side fan would benefit CPU more ... so no problem for OC the CPU .. tool less design are very good as well |
|
|
Apr 13 2007, 01:15 PM
|
|
Senior Member
1,577 posts Joined: May 2005 From: USJ
|
planning to get an Antec P180 or P182.. Is it recommended? I like the look of it. how's the build quality?
|
|
|
Apr 13 2007, 01:19 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
P180 n P182 are good cases... the build quality is alright and its also very goo for a silent setup.
the biggest flaw of the case is that its a cable management nightmare! so many people have complained about the case being so difficult for cable management. |
|
|
Apr 14 2007, 02:33 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
ok since there's pcfair, how bout sumbody look for the best choice of case available there. in term of price(promotions) and features.. i think it'll help lotsa ppl here..
|
|
|
Apr 14 2007, 06:29 AM
|
Senior Member
1,180 posts Joined: Apr 2007 From: Pasir Gudang. Johor 
|
where do u think in LYP i can "molest" this casing?? coz went to all it, i cant find it there at the rack... i want to take a look first the casing ...
and roughly how much it gonna cost?? |
|
|
Apr 14 2007, 09:18 AM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
But i go pc fair didnt c any casing selling ( not include buying whole pc that kind ). Most of them sell mp4 mp4 mp4 call all the where XD.
Hope after pc fair ATE can get some new stock for those LL casing T-T. |
|
|
Apr 14 2007, 10:58 AM
|
|
Senior Member
2,239 posts Joined: Jun 2006 From: K.L
|
got ar... Gigabyte casings the most.. = ="
|
|
|
Apr 14 2007, 12:25 PM
|
|
Senior Member
824 posts Joined: Oct 2006 From: P J
|
Got some Gigabyte casings, some AVF and CoolerMaster too. Mostly there are selling Mp4s.
|
|
|
Apr 14 2007, 01:28 PM
|
Junior Member
330 posts Joined: Mar 2005 From: JB-SG
|
QUOTE(jy14 @ Apr 14 2007, 12:25 PM) Got some Gigabyte casings, some AVF and CoolerMaster too. Mostly there are selling Mp4s. This time PC fair not really got 1 stall sell a lot Casing...too bad.... many are selling mp4, pendrive, memory card.... i think bcs the price of them cheaper and easier get sales ^^ Anyway..... i would like to ask the CM staker 830 the side panel fans, are used to exaust the hot air from inside, right?? |
|
|
Apr 14 2007, 01:45 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
nope it's for u to bring the cool air into the case and let the rear case fan and PSU fan to take it out ...
of couse u could have it mounted with ur own preference but it wont be that efficient as pulling air into the case for cooling ... |
|
|
Apr 14 2007, 04:54 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Hmm maybe i miss, i just c 1 coolermaster display on there ( dont know sell or not) and with alot coolermaster psu there. Beside got some new 3d card and motherboard display there. Other i just alot ppl scream there mp4 mp4 mp4........ or external HD external HD.
Not really c on it like selling casing, just c alot show off casing running there .... |
|
|
Apr 14 2007, 06:25 PM
|
|
Senior Member
951 posts Joined: Nov 2005 From: Jager Bomb
|
PC Fair Gigabyte 3D Aurora 570 price tag at RM675, i was
 , whoever buy that casing must be an idiot |
|
|
Apr 14 2007, 06:50 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
y say like that? Is too expensive ??
|
|
|
Apr 14 2007, 07:14 PM
|
|
Senior Member
951 posts Joined: Nov 2005 From: Jager Bomb
|
You can get cheaper at bulk~
|
|
|
Apr 14 2007, 09:30 PM
|
Senior Member
1,318 posts Joined: Jan 2003 From: メラカ /b/PowerLvl:Over9000!
|
I'm looking for those mini casings using mini ATX one.. Kinda like Shuttle brand. Boxy and looks nice.. Any good recommendations?
From Shuttle brand what model is good and cheap? It comes with Mini ATX, PSU and cooling fan rite? Other brands got anything similiar, cheaper and better? |
|
|
Apr 14 2007, 11:07 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm actually Shuttle is the best if u are looking for single solution that covers everything from mobo, PSU to case ... in addition the cooling kit also provide excellent deal..
|
|
|
Apr 15 2007, 11:01 AM
|
Senior Member
1,142 posts Joined: Sep 2004 From: Puchong 
|
Anybody here uses the Silverstone's TJ06? Is it good? And what kind of motherboard can i fit into it?
|
|
|
Apr 15 2007, 12:22 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
Pretty roomy casing but i don't like the ideaof putting HDD below the PSU
, it's ok i u have only 1 or 2 hdd but if u have more than that the HDD will overheat(from what i read from review around the web, don'tflame me lol ). It's quite tall as well so make sure u have the space for it, not to mention it looks damn good , the biggest mobo it can fit is ATX style mobo |
|
|
Apr 15 2007, 04:51 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Yah but for the price of RM500 .. .hmm it's kind of expensive for such size that does not come with adiditional feature ...
further more cooling solution have to self prepare ...which is very limited to few choices ... |
|
|
Apr 15 2007, 06:40 PM
|
|
Senior Member
1,142 posts Joined: Sep 2004 From: Puchong
|
hmm.. i see i see... can you tell me what are the options for the cooling solution? I'm really newbie in this. Or is there another case that you would like to recommend? Main concern is that the case has to be black and well, looks good. Heheh..
|
|
|
Apr 15 2007, 08:41 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(BlueSilver @ Apr 15 2007, 06:40 PM) hmm.. i see i see... can you tell me what are the options for the cooling solution? I'm really newbie in this. Or is there another case that you would like to recommend? Main concern is that the case has to be black and well, looks good. Heheh.. Why not u try to check out some Lian Li casings? Seriously nicer silverstone casing is very expensive(~RM1k) like those TJ09 or TJ07, which is out of your budget by quite a lot . |
|
|
Apr 15 2007, 10:03 PM
|
|
Senior Member
1,577 posts Joined: May 2005 From: USJ
|
any idea where i can get antec P182? really like the looks of it and seems like they've put some improvement on it over P180.
|
|
|
Apr 15 2007, 10:14 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
where to find lian li pca-07 review and pictures?? I cant seem to google it..
|
|
|
Apr 15 2007, 10:35 PM
|
Senior Member
3,145 posts Joined: Oct 2006
|
Any recommendation for full tower ? to support cards like R600 length or dual psu.
|
|
|
Apr 15 2007, 11:56 PM
|
|
Senior Member
1,142 posts Joined: Sep 2004 From: Puchong
|
QUOTE(Bliz @ Apr 15 2007, 08:41 PM) Why not u try to check out some Lian Li casings? Seriously nicer silverstone casing is very expensive(~RM1k) like those TJ09 or TJ07, which is out of your budget by quite a lot hmm.. yes i've also thought of the Lian Li PC-V1000B Plus II. I guess i still need to think more. . Thanks for the suggestion. |
|
|
Apr 16 2007, 02:09 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(BlueSilver @ Apr 15 2007, 06:40 PM) hmm.. i see i see... can you tell me what are the options for the cooling solution? I'm really newbie in this. Or is there another case that you would like to recommend? Main concern is that the case has to be black and well, looks good. Heheh.. If black is what u are looking for that would be easy.. Lian Li-V1000, V1100, A16, PC101, B20, V600 and A05.. it all depend on ur preference of appearance and hardware component inside ... |
|
|
Apr 16 2007, 04:31 PM
|
|
Senior Member
1,577 posts Joined: May 2005 From: USJ
|
sigh.. my fav P180 won't be able to handle 8800gtx.. guess have to look for another chasis.. Any recommendations? dun wan to spend too much.. tj07 is really out of budget.. Anything from Lian Li which is roomy and yet reasonably priced?
budget about RM 600-700 |
|
|
Apr 16 2007, 04:39 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Added on April 16, 2007, 4:41 pmThen A16 will works for the budget range, it has lots of ventilations holes to keep the entire rig cool .... and reallocatable HDD cage ... or push up budget up to RM800 to grab V1000 series. It has side patent fan that can be reversed to breath cool air to the 8800GTX, it help to keep the card cool down by 5c as compared to exhaust hot air out through the side patent fan ... This post has been edited by Doom: Apr 16 2007, 04:42 PM |
|
|
Apr 16 2007, 05:14 PM
|
|
Senior Member
1,577 posts Joined: May 2005 From: USJ
|
kinda like the looks of PC-A10 over v1000.. what's the local pricetag for it? and where can i buy it?
|
|
|
Apr 16 2007, 07:19 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
PCA10 is priced at RM798 from ATE of LYP ...
i owned the case before and not really satisfied with the design.. in the end sell it off and grab V1000A .. . love it .. so much as much more easier to control the airflow ... |
|
|
Apr 16 2007, 07:21 PM
|
|
Senior Member
2,156 posts Joined: Apr 2005
|
anyone have any comments comparing the cm elite 330/331 with the cm centurion 5. i went to see them last week and feel that the centurion 5 is like more harder as in better quality.
the power button also looks and feels better, unlike the 331 that is kinda loose and cheap. the 330 is not that bad tho. dang, now i gotta raise my budget for a cent 5 again. T_T |
|
|
Apr 16 2007, 07:23 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
The price tag already tells the different .... besides that the number of Centurion user also clarify the quality, solidness and performance of the case ...
|
|
|
Apr 16 2007, 07:37 PM
|
Junior Member
376 posts Joined: Jun 2006
|
Any other cheaper Lian Li case besides G7? (so sad no more G7, coz only got budget now).
|
|
|
Apr 16 2007, 08:17 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Nth as cheap as the promotion G7 ... others are PC7 at RM288 or S07 around RM300 as well...
other cases would cost more .. like V600 and A05 around RM360+.. then follow by RM5++ for the other cases.. |
|
|
Apr 16 2007, 09:01 PM
|
|
Senior Member
1,577 posts Joined: May 2005 From: USJ
|
so PC-A10 is about RM 798 and V1000 at RM 800?
like that then i'd go for v1000 di lo. |
|
|
Apr 16 2007, 09:33 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
A10 is RM798
V1000A RM748 V1000B RM758 |
|
|
Apr 17 2007, 12:27 AM
|
|
Senior Member
1,577 posts Joined: May 2005 From: USJ
|
question. does the v1000 gather much dust? i don't usually clean pc often.. and those 2mm holes really look like a dust catcher..
|
|
|
Apr 17 2007, 12:46 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Hmmm .. so far i dont experience too much of dust accumulated inside the case but cleaning it for once a month is something must be practiced..
|
|
|
Apr 17 2007, 12:51 AM
|
|
Junior Member
376 posts Joined: Jun 2006
|
QUOTE(Doom @ Apr 16 2007, 08:17 PM) Nth as cheap as the promotion G7 ... others are PC7 at RM288 or S07 around RM300 as well... How is this LL S07 looks like? Coz I tried google for it but no result for that model. (or is it A07?)other cases would cost more .. like V600 and A05 around RM360+.. then follow by RM5++ for the other cases.. This post has been edited by alijoe: Apr 17 2007, 01:09 AM |
|
|
Apr 17 2007, 11:02 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(awh85 @ Apr 16 2007, 07:21 PM) anyone have any comments comparing the cm elite 330/331 with the cm centurion 5. i went to see them last week and feel that the centurion 5 is like more harder as in better quality. I have use the C5 before changing to the LL and i must say that the C5 is very well made. Love it very much but there is a few problems that i encounter :the power button also looks and feels better, unlike the 331 that is kinda loose and cheap. the 330 is not that bad tho. dang, now i gotta raise my budget for a cent 5 again. T_T The filters of the C5 really collects alot of dust. You will need to clean it up very often as you will see a tiny layer of dust after a few days. Taking off the front panel might be troublesome. This is because you will need to take it out whenever you wanted to clean the front intake fan and take out the Rom. Besides, the pins of the leg are kinda flimsy and you must becareful taking them off. I damages one leg before previously and there is no way you could replace them. Cable management is extremely tough. No many places for you to hide the cables.. Other than those, i like the C5 very much.For a low price and a good design, especially being tooless as well, it is a very good casing. The built quality is very very good and tough. Anyway, besides white, silver side, and blue side, i also say a fully black (black side) as well at ALL IT the other day when i went to LYP.. This post has been edited by akachester: Apr 17 2007, 11:03 AM |
|
|
Apr 17 2007, 11:21 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(alijoe @ Apr 17 2007, 12:51 AM) How is this LL S07 looks like? Coz I tried google for it but no result for that model. (or is it A07?) Sorry my mistake to reverse pronounce the name .. PC-7S That's the link to the case ... affordable enough at RM300... |
|
|
Apr 17 2007, 12:18 PM
|
|
Junior Member
376 posts Joined: Jun 2006
|
Thnx doom..will check on the PC7 and PC-7S next week.
|
|
|
Apr 17 2007, 12:28 PM
|
|
Junior Member
330 posts Joined: Mar 2005 From: JB-SG
|
Wow...
the V1000 air flow system seem like quite special after i read up this casing at LianLi website but i still can't understand the cashflow sysyem is how =.= |
|
|
Apr 17 2007, 01:23 PM
|
|
Junior Member
14 posts Joined: Jul 2006
|
QUOTE(Doom @ Apr 17 2007, 11:21 AM) Sorry my mistake to reverse pronounce the name .. ermm want to ask is there any fan on top ?? PC-7S That's the link to the case ... affordable enough at RM300... and for the side panel is it transparent , planing to buy a case lest then rm 500 fo my pending new com hope can see those blink blink stuff |
|
|
Apr 17 2007, 03:10 PM
|
Senior Member
3,988 posts Joined: Apr 2005 From: KL
|
I'm very new to this modding. I plan to buy new dekstop pc soon.
As a beginner to modding, which casing suit me? Just want a simple case with good air flow(front and back fan), transparent side panel, and easy to mod with to become a bling bling case. My bro using power logic dont know what model... got transparent side panel but very noisy. Oh ya, normally buy casing come together with psu? I need recommendation and guides. Thanks in advance. |
|
|
Apr 17 2007, 03:12 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
Kelv
state ur budget. otherwise people will start recommending cases that costs over 1k |
|
|
Apr 17 2007, 03:29 PM
|
|
Senior Member
3,988 posts Joined: Apr 2005 From: KL
|
Ok, as a newbie.. my budget just 200 bucks.
I know is low... but let me try out with cheap and simple stuff first. |
|
|
Apr 17 2007, 04:31 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(alijoe @ Apr 17 2007, 12:18 PM) Thnx doom..will check on the PC7 and PC-7S next week. Sure no problem, check out the case and feel it before deciding to buy it or not ..QUOTE(oldfox @ Apr 17 2007, 12:28 PM) Wow... acutally from the graph.. the rear intake will take cool air in and after passed through the CPU area and rise to the graphic card area and exhaust through the side patent fan. the V1000 air flow system seem like quite special after i read up this casing at LianLi website but i still can't understand the cashflow sysyem is how =.= while the bottom part will be intake for HDD till reach PSU for exhaust ... QUOTE(alexlv @ Apr 17 2007, 01:23 PM) ermm want to ask is there any fan on top ?? Go for Lian Li RM300 and mod the side window urself or can also buy from the shopas well ..and for the side panel is it transparent , planing to buy a case lest then rm 500 fo my pending new com hope can see those blink blink stuff |
|
|
Apr 18 2007, 12:04 AM
|
|
Senior Member
1,577 posts Joined: May 2005 From: USJ
|
sigh. no more PC-A10 from ATE.. they say dunno when only bringing in.. maybe might go for V1000..
|
|
|
Apr 18 2007, 08:44 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Well, i thought i heard from them that they have a new batch of casing incoming soon?
|
|
|
Apr 18 2007, 08:03 PM
|
|
Senior Member
3,988 posts Joined: Apr 2005 From: KL
|
Need recommendation, newbie here.
Budget 200+- bucks. Prefer got window side panel, front and rear silent fan, simple and neat look. Is it normally casing come together with PSU? |
|
|
Apr 18 2007, 10:18 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
wa ATE now still got what casing for LL ??
I think when i buy all LL casing habis.... |
|
|
Apr 20 2007, 07:18 AM
|
Junior Member
8 posts Joined: Apr 2007
|
apa lebihnya kalu pakai case aluminium compare with normal case? mmg la lg cantik, but dr segi penyejukan system main pranan gak ke?
(just wondering; never use alum case, still using old style ATX case ) |
|
|
Apr 20 2007, 07:59 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(zul2 @ Apr 20 2007, 07:18 AM) apa lebihnya kalu pakai case aluminium compare with normal case? mmg la lg cantik, but dr segi penyejukan system main pranan gak ke? The most important thing about using Aluminium casing would be:(just wondering; never use alum case, still using old style ATX case )Lightweight Take a sample of two casings that is on the same size, and the material is on the same thickness. One of them is using SECC material, and one of them is aluminium. Then compare the weight by yourself. There you'll see that aluminium cases are either half the weight of the SECC casing and the max would be 70% of the weight of an SECC chasis. Just my opinion though. |
|
|
Apr 20 2007, 11:11 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(zul2 @ Apr 20 2007, 07:18 AM) apa lebihnya kalu pakai case aluminium compare with normal case? mmg la lg cantik, but dr segi penyejukan system main pranan gak ke? main thing light weight aje, 2nd cantik, dat's all for alu case(just wondering; never use alum case, still using old style ATX case )secc case is toughness on the material, but it's not like we going to play american football with our case  |
|
|
Apr 20 2007, 05:51 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Apr 20 2007, 07:59 AM) The most important thing about using Aluminium casing would be: Yea, i agree on this. I could take the PC-7 casing easily with just one hand.But on the other hand, i am suffering when trying to take my older C5 with one hand..lol..Lightweight Take a sample of two casings that is on the same size, and the material is on the same thickness. One of them is using SECC material, and one of them is aluminium. Then compare the weight by yourself. There you'll see that aluminium cases are either half the weight of the SECC casing and the max would be 70% of the weight of an SECC chasis. Just my opinion though. Anyway, wondering would aluminum casing help in terms of providing better airflow/cooler air?Cause i have seen plenty of enclosure which uses aluminum as their material.. |
|
|
Apr 20 2007, 08:46 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
if it does not why would so many enthusiast insist on using aluminum case ....
however the effect isn't that much different but weight itself is a plus point to own an aluminum case ... |
|
|
Apr 21 2007, 05:55 PM
|
Junior Member
68 posts Joined: Mar 2007 From: Klang
|
no more raidmax sellers at lowyat?
|
|
|
Apr 21 2007, 07:25 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(kyosukeX @ Apr 21 2007, 05:55 PM) no more raidmax sellers at lowyat? i'm not suprise why there's not seller for Raidmax due to its design + structure that is suxx wanna gaming casing, got lots of brand that is better in design + quality made --> CoolerMaster & Gigabyte however i will shock if no seller for Lian Li case |
|
|
Apr 21 2007, 09:11 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
The main problem is the look is too out standing and the price as well..
besides it's not well design internally // |
|
|
Apr 21 2007, 11:52 PM
|
|
Junior Member
160 posts Joined: Mar 2006 From: Klang... tesco klang
|
QUOTE(Doom @ Apr 20 2007, 09:46 PM) if it does not why would so many enthusiast insist on using aluminum case .... doom,however the effect isn't that much different but weight itself is a plus point to own an aluminum case ... if lightweight is the only reason to go for alu. doesn't that a bit overkill to have an expensive casing? for most of us, moving the casing is to clean the dirt and dust accumulated on a monthly or weekly basis... if alu can play a major role in lowering the temp of the internals. if it does.. it's only about 1-3 C only right? regards, point blanc |
|
|
Apr 21 2007, 11:59 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
yah ..it's only about 3c of difference ... besides cooling the internal structure of the Alu case is always better than steel case ..
|
|
|
Apr 22 2007, 12:36 AM
|
|
Junior Member
160 posts Joined: Mar 2006 From: Klang... tesco klang
|
QUOTE(Doom @ Apr 22 2007, 12:59 AM) yah ..it's only about 3c of difference ... besides cooling the internal structure of the Alu case is always better than steel case .. doom,so theoritically not much of a difference between the two besides the minor temp, and the weight. bling-bling factor is up to individual.. i guess i'll consider again of getting a new casing... regards, point blanc |
|
|
Apr 22 2007, 01:47 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Do remember that 1-3 degrees in temperature drop is not something that you should take lightly.
1-3 degrees of temperature drop is very high for me. That's why i choose Alu case. |
|
|
Apr 22 2007, 02:08 AM
|
Senior Member
5,065 posts Joined: Jan 2003 From: Taman Tun, KL
|
Aluminum cases being cooler than steel cases are a myth. That being said, it does feel alot nicer and you feel like you're getting the sort of quality you paid for.
But, steel cases have some advantages too: 1) Cheaper 2) Sturdier. Say what you want, but a steel chassis is less likely to vibrate/resonate/hum than an aluminum one. I hate the way my Lian Li panels can rattle, I had to remedy it with dampening material and velour strips. |
|
|
Apr 22 2007, 09:35 AM
|
Junior Member
84 posts Joined: Mar 2007
|
hi where to find Raidmax Ninja at Lowyat and the price...
thanks |
|
|
Apr 22 2007, 12:57 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(evilnickwong @ Apr 22 2007, 02:08 AM) Aluminum cases being cooler than steel cases are a myth. That being said, it does feel alot nicer and you feel like you're getting the sort of quality you paid for. i wouldnt say its a myth....i say its UTTER BULL But, steel cases have some advantages too: 1) Cheaper 2) Sturdier. Say what you want, but a steel chassis is less likely to vibrate/resonate/hum than an aluminum one. I hate the way my Lian Li panels can rattle, I had to remedy it with dampening material and velour strips.  . alu cases does NOTHING for hardware temps. |
|
|
Apr 22 2007, 01:02 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(sHawTY @ Apr 22 2007, 01:47 AM) Do remember that 1-3 degrees in temperature drop is not something that you should take lightly. Yah same here, besides it always good to have aluminum case to store invested hardwares...1-3 degrees of temperature drop is very high for me. That's why i choose Alu case. QUOTE(evilnickwong @ Apr 22 2007, 02:08 AM) Aluminum cases being cooler than steel cases are a myth. That being said, it does feel alot nicer and you feel like you're getting the sort of quality you paid for. It depend on which case that refers to, according to what i heard from ATE sales guys LL case can withstand a person weight up to 80KG standing on it ...But, steel cases have some advantages too: 1) Cheaper 2) Sturdier. Say what you want, but a steel chassis is less likely to vibrate/resonate/hum than an aluminum one. I hate the way my Lian Li panels can rattle, I had to remedy it with dampening material and velour strips. |
|
|
Apr 22 2007, 03:06 PM
|
|
Junior Member
160 posts Joined: Mar 2006 From: Klang... tesco klang
|
QUOTE(sHawTY @ Apr 22 2007, 02:47 AM) Do remember that 1-3 degrees in temperature drop is not something that you should take lightly. sHawTY,1-3 degrees of temperature drop is very high for me. That's why i choose Alu case. erm...sHawTY can u tell me why 1-3C drop shouldn't be taken lightly? i'm a noob in pc temp control... my opinion -> when you compare the heat from ...lets say GC.. say.. idle is 50C with stock HSF, and say... idle 40C with 3party HSF (a drop of 10C), lets say casing influence.. 37C (a drop of 3C) .. when i compare the drop between those two .. as in HSF and casing.. it's not that significant.. that's my theory by the way.. if i'm dead wrong.. please enlighten me.. hehe regards, point blanc |
|
|
Apr 22 2007, 04:09 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(point blanc @ Apr 22 2007, 03:06 PM) sHawTY, Think, with 1-3 degrees less in temps, don't you think you can overclock your hardwares higher?erm...sHawTY can u tell me why 1-3C drop shouldn't be taken lightly? i'm a noob in pc temp control... Yes you do. That's why a temp differences of 1-3 degrees is something you should not take lightly. |
|
|
Apr 22 2007, 08:03 PM
|
|
Junior Member
84 posts Joined: Mar 2007
|
any one know where to buy Raidmax Ninja black casing
|
|
|
Apr 23 2007, 07:13 PM
|
Senior Member
1,304 posts Joined: Nov 2005 From: A place
|
need recommandation ~ i hav a budget of RM500
any brand will do ... most important thing is good airflowing for my PC check my sig for my Rig info .... Thx for all pr0s recommandation first.... how about TT tsunami ? |
|
|
Apr 23 2007, 09:06 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(Mr.Lonely @ Apr 23 2007, 07:13 PM) need recommandation ~ i hav a budget of RM500 How bout Silverstone TJ06? Or maybe u wanna check out some Lian Li casing at ATE, several nice models for under RM 500 available there any brand will do ... most important thing is good airflowing for my PC check my sig for my Rig info .... Thx for all pr0s recommandation first.... how about TT tsunami ? |
|
|
Apr 23 2007, 09:16 PM
|
|
Senior Member
1,304 posts Joined: Nov 2005 From: A place
|
bro, i wan look nice one wo n good airflow ~ XD
|
|
|
Apr 23 2007, 10:07 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(Mr.Lonely @ Apr 23 2007, 09:16 PM) bro, i wan look nice one wo n good airflow ~ XD Well beauty is in the eye of beholder, just go and browse Silvestone's webpage to get an idea of TJ06, for lian li i dun really like their cheaper casing stylings, i only like those PC A10 or V series casing |
|
|
Apr 23 2007, 10:13 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
I dot think that B20 is a very sexy case from Lian Li despite the fact it's using 8CM intake at the rear side ....
|
|
|
Apr 24 2007, 08:29 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(Mr.Lonely @ Apr 23 2007, 09:16 PM) bro, i wan look nice one wo n good airflow ~ XD The TJ-06 should have a good airflow but about looks nice?i guess thats really up to ur preferences of what you like. I feel the Tj-06 looks nice as well but you may not like it..Therefore, it really depends.. |
|
|
Apr 24 2007, 04:48 PM
|
Senior Member
2,562 posts Joined: Jan 2003
|
any recommendatios for allu tower casing that can hold 5-6 units of 3.5" hdd and good air ventilation for hot 8800gts card , budget around Rm600-800?
This post has been edited by rayfoo: Apr 24 2007, 04:50 PM |
|
|
Apr 24 2007, 05:28 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
|
|
|
Apr 25 2007, 04:01 AM
|
Junior Member
43 posts Joined: Jun 2006 From: ampang
|
where to get lian li casings in kl?
|
|
|
Apr 25 2007, 08:39 AM
|
Senior Member
625 posts Joined: Aug 2006 From: Subang Jaya
|
QUOTE(hazwan @ Apr 25 2007, 04:01 AM) where to get lian li casings in kl? MyATE Computers at Lowyat Plaza Their site : http://www.myate.com/ |
|
|
Apr 25 2007, 10:32 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(hazwan @ Apr 25 2007, 04:01 AM) where to get lian li casings in kl? ATE have most of them there at LYP. And the last time i check, CYCOM also have a few of them but price is higher.. |
|
|
Apr 25 2007, 11:55 AM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
most shop at LYP now got LL case. mostly got pc-007 model
|
|
|
Apr 25 2007, 12:50 PM
|
Junior Member
55 posts Joined: Jan 2005 From: Seremban
|
Lian Li PC-60A PLUS II
where can i get it and what be the price..... looking ATE price list but seem can't find it at hardwarezone price list |
|
|
Apr 25 2007, 02:36 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
PC-60A Pluss II priced at RM398 with free upgrade to the transparent side panel window..
|
|
|
Apr 25 2007, 02:47 PM
|
|
Junior Member
55 posts Joined: Jan 2005 From: Seremban
|
QUOTE(Doom @ Apr 25 2007, 02:36 PM) PC-60A Pluss II priced at RM398 with free upgrade to the transparent side panel window.. nice price, hope they got the black colour..... |
|
|
Apr 26 2007, 12:02 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(CoolerMaster @ Apr 25 2007, 02:47 PM) nice price, hope they got the black colour..... I saw a black version on display at Tuesday when i was there.. |
|
|
Apr 27 2007, 12:28 AM
|
|
Junior Member
160 posts Joined: Mar 2006 From: Klang... tesco klang
|
is ATE seldom update their webpage or i have to place an order first before i go to their shop??? their price list contain more models than the products listed in their webpage (for casings...)
regards, point blanc |
|
|
Apr 27 2007, 04:21 AM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(CoolerMaster @ Apr 25 2007, 02:47 PM) nice price, hope they got the black colour..... yes...they do hv black colour wanPC-60B Plus II one thing that lack bout this thing....their rear fan is only 80mm QUOTE(point blanc @ Apr 27 2007, 12:28 AM) is ATE seldom update their webpage or i have to place an order first before i go to their shop??? their price list contain more models than the products listed in their webpage (for casings...) u can always call them for confirmation of stocks...regards, point blanc but, i think they do hv the casing in their store |
|
|
Apr 27 2007, 06:01 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
The only problem with ATE is their poor site and price list availability ....
i think i would recommend them to deal with it since it's quite often mentioned here.. just wait for my news ... |
|
|
Apr 28 2007, 10:27 AM
|
Junior Member
35 posts Joined: Aug 2006 From: Miri
|
i'm now looking for a new casing...LianLi PC-G7 Vs Thermaltake Armor Junior, which one better...
...need some opinion from u guys... |
|
|
Apr 28 2007, 11:20 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Even if G7 is better but u wont get it from the shop front now days as it's no longer in production. You have to look for other LL case if stick to the brand itself.
else Armour Junior Aluminum version is another good choice as well ... |
|
|
Apr 28 2007, 01:12 PM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
QUOTE(bOy13 @ Apr 28 2007, 10:27 AM) i'm now looking for a new casing...LianLi PC-G7 Vs Thermaltake Armor Junior, which one better... but sadly, currently there are no more stocks for G7 and its no longer in production.. ...need some opinion from u guys... well, Armor Junior is also not bad..read the review and feedback form the ThermalTake thread..im sure many forumer are using it.. |
|
|
Apr 28 2007, 01:33 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
go for armor jr alu..
nice.. nice.. |
|
|
Apr 28 2007, 09:29 PM
|
|
Junior Member
332 posts Joined: Nov 2005 From: w.maju / k.terengganu
|
is tt shark any good?
and what is the price now? thank u. |
|
|
Apr 28 2007, 11:29 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(bOy13 @ Apr 28 2007, 10:27 AM) i'm now looking for a new casing...LianLi PC-G7 Vs Thermaltake Armor Junior, which one better... If shawty bringing in LL casing, u MIGHT can get G7 from him ...need some opinion from u guys... |
|
|
Apr 29 2007, 04:59 PM
|
Junior Member
442 posts Joined: Feb 2007 From: Kuala Lumpur - Selangor
|
tt armor jr and tsunami which one better ?
|
|
|
Apr 30 2007, 11:03 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
both are very similar in term of overall design, just that Tsunami come with pure aluminum while only silver Ar Jr comes in aluminum.
Tsunami has more features than Ar Jr but Ar Jr has more ventilation holes for cooling purpose ... so it's more down to which type of casing u are looking for ... sleek design with door and reduced noise or cool and stylish but a bit noisy case. |
|
|
Apr 30 2007, 01:15 PM
|
Junior Member
8 posts Joined: Jun 2006
|
QUOTE(Zicron @ Apr 28 2007, 11:29 PM) If shawty bringing in LL casing, u MIGHT can get G7 from him If bro shawty bring LL here..yeah..I'll make sure to order 1 G7 |
|
|
Apr 30 2007, 01:19 PM
|
Senior Member
1,602 posts Joined: Aug 2005
|
QUOTE(kenneth87 @ Mar 26 2007, 11:02 PM) Power Logic Modena 1200X ...........................Market price : RM110 bundle with 250 true power PSU and transparent side panel. i js bought my 1200x @ RM139 lol >"< |
|
|
Apr 30 2007, 02:49 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(motosan @ Apr 30 2007, 01:15 PM) If bro shawty bring LL here..yeah..I'll make sure to order 1 G7 High 5 men..i oso waiting for the G7 |
|
|
Apr 30 2007, 05:45 PM
|
|
Junior Member
274 posts Joined: Jan 2007 From: johor/klang
|
QUOTE(Zicron @ Apr 28 2007, 11:29 PM) If shawty bringing in LL casing, u MIGHT can get G7 from him QUOTE(motosan @ Apr 30 2007, 01:15 PM) If bro shawty bring LL here..yeah..I'll make sure to order 1 G7 shawty bringin g7 in? maybe what zicron meant was shawty bought another LL case, then can get his g7. |
|
|
Apr 30 2007, 07:31 PM
|
|
Junior Member
8 posts Joined: Jun 2006
|
QUOTE(nazerry @ Apr 30 2007, 05:45 PM) shawty bringin g7 in? maybe what zicron meant was shawty bought another LL case, then can get his g7. Hmm..as long as it is G7..then I dun mind hehe..Anyway..That TT Armor Junior in black look nice also aa..and not bad, plus full alu like LL.maybe some forumer using it can give some feedback. |
|
|
Apr 30 2007, 07:43 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(nazerry @ Apr 30 2007, 05:45 PM) shawty bringin g7 in? maybe what zicron meant was shawty bought another LL case, then can get his g7. I think shawty might doin bulk for LL case..bt his post was clean few pages back |
|
|
Apr 30 2007, 08:03 PM
|
|
Senior Member
625 posts Joined: Aug 2006 From: Subang Jaya
|
For those of you who are experiencing the excitement for shawty's Lian Li bulk, particularly the G7, I've got some bad news for yah, especially for those with tight budgets
 According to him personally, the cost for a G7 will not be the RM198 we saw at ATE due to the fact we all forgot that back then, ATE's price was a 'clear stock promotion', hence the low, low price.Also, he has mentioned that we should expect the price to be somehow similiar to that of ATE's pricing before the promotion, which was RM298, RM100 more This post has been edited by Samanoske Akechi: Apr 30 2007, 08:03 PM |
|
|
Apr 30 2007, 08:22 PM
|
Senior Member
1,405 posts Joined: Jun 2005
|
anyone know nice sff casing selling in LYN?...
something like microfly brand selling at the bulk section there.. thanx.. |
|
|
May 1 2007, 03:41 AM
|
|
Junior Member
376 posts Joined: Jun 2006
|
Uwahh..yup ATE price is promotion to clear stock..hopefully price range RM200-250. A little higher pun its ok. Then I can sell my Centurion C532 hehe..
This post has been edited by alijoe: May 1 2007, 03:50 AM |
|
|
May 1 2007, 11:52 AM
|
Junior Member
391 posts Joined: Jul 2005 From: Bandar Baru Bangi/ Jalan Klang Lama
|
Aiseh, someone is bringing in LL in bulk order ke? I just got myself PC-60 Plus since it is within my budget....maybe next time can get V1000 ke...
And do v600 is good in term of practicality, since some people said that the PSU location will block something(ah, i forgot, is it HSF )This post has been edited by katunX: May 1 2007, 11:56 AM |
|
|
May 1 2007, 01:45 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(katunX @ May 1 2007, 11:52 AM) Aiseh, someone is bringing in LL in bulk order ke? I just got myself PC-60 Plus since it is within my budget....maybe next time can get V1000 ke... Yea, i saw the mod of the V600 by uncle ianho (MiniMe) if i not forgotten and it does seem like the PSU is blocking the processor HSF. But the V600 is indeed a beautiful case..And do v600 is good in term of practicality, since some people said that the PSU location will block something(ah, i forgot, is it HSF ) |
|
|
May 1 2007, 02:30 PM
|
|
Junior Member
391 posts Joined: Jul 2005 From: Bandar Baru Bangi/ Jalan Klang Lama
|
QUOTE(akachester @ May 1 2007, 01:45 PM) Yea, i saw the mod of the V600 by uncle ianho (MiniMe) if i not forgotten and it does seem like the PSU is blocking the processor HSF. But the V600 is indeed a beautiful case.. That's what exactly what I see and the ATE people told me, so I go for classical series instead, if wanna go for v1000 seems like over my budget already... I know a little bit too late about G7 though, i found out the pciture in Lian Li thread, a btter looking casing rather than normal look PC-60, if the bulk is a lil bit earlier maybe i will go for G7... |
|
|
May 1 2007, 02:48 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(katunX @ May 1 2007, 02:30 PM) That's what exactly what I see and the ATE people told me, so I go for classical series instead, if wanna go for v1000 seems like over my budget already... Yea, i was there searching for the G7 as well last time out but opted for the PC-7 instead. Too bad i missed the promotion on the PC-60 as well cause if not, i rather spend another RM100 extra just for the accesories... I know a little bit too late about G7 though, i found out the pciture in Lian Li thread, a btter looking casing rather than normal look PC-60, if the bulk is a lil bit earlier maybe i will go for G7... |
|
|
May 1 2007, 05:31 PM
|
|
Junior Member
391 posts Joined: Jul 2005 From: Bandar Baru Bangi/ Jalan Klang Lama
|
QUOTE(akachester @ May 1 2007, 02:48 PM) Yea, i was there searching for the G7 as well last time out but opted for the PC-7 instead. Too bad i missed the promotion on the PC-60 as well cause if not, i rather spend another RM100 extra just for the accesories... i just got mine for RM398 including window side panel for PC-60, is it the normal price before? They said this is the promotion price including the side panel as I opt for the one without, they said only got with the window side panel... |
|
|
May 1 2007, 07:45 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(katunX @ May 1 2007, 05:31 PM) i just got mine for RM398 including window side panel for PC-60, is it the normal price before? They said this is the promotion price including the side panel as I opt for the one without, they said only got with the window side panel... Yea, IIRC, they are giving away that side panel window FREE as promotion. Didnt notice it when i bought mine there. Really cheap price for a LL Anyway, the PC-60 is having a 8cm fan as exhaust right?Others exactly the same like PC-7? (Top - 8cm, Front - 12cm) |
|
|
May 2 2007, 01:09 PM
|
Senior Member
1,413 posts Joined: Jun 2006 From: Shah Alam
|
Any idea what is the price of CM Media? Is it available here? Looks nice for multimedia rig
|
|
|
May 2 2007, 03:40 PM
|
|
Junior Member
391 posts Joined: Jul 2005 From: Bandar Baru Bangi/ Jalan Klang Lama
|
QUOTE(akachester @ May 1 2007, 07:45 PM) Yea, IIRC, they are giving away that side panel window FREE as promotion. Didnt notice it when i bought mine there. Really cheap price for a LL I'm not really sure the size of the exhaust fans on the top, and front because frankly speak, I only take a peek at the casing at ATE and right now the casing stilll in the wrapping box sitting in my room waiting for new system to set it up.... Anyway, the PC-60 is having a 8cm fan as exhaust right?Others exactly the same like PC-7? (Top - 8cm, Front - 12cm) This post has been edited by katunX: May 2 2007, 03:40 PM |
|
|
May 4 2007, 03:11 AM
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
Anybody can recommend me a good looking casing around the price of RM200?it's for my mom's PC.i just want it to look "expensive" rather than some good airflow casing but ordinary design because what women usually want is the "looks"
so far my survey: 1. Raidmax Ninja RM220 PC-Zone 2. Powerlogic Atrix 5000T RM160 PC-Zone 3. I-cute casing which is like a jet-engine RM220 Centurion 5 looks cheap tho |
|
|
May 4 2007, 05:17 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Get those branded manufacturer case if possible such as HP, Dell and etc...
|
|
|
May 4 2007, 09:11 PM
|
Junior Member
508 posts Joined: Mar 2005 From: KL/Cyberjaya.
|
Where can I find shop selling Lian-li casing? Also, got any price list for it online?
|
|
|
May 4 2007, 09:48 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(kurogane @ May 4 2007, 09:11 PM) Where can I find shop selling Lian-li casing? Also, got any price list for it online? ATE, lowyat plazahttp://www.myate.com |
|
|
May 4 2007, 09:59 PM
|
|
Junior Member
508 posts Joined: Mar 2005 From: KL/Cyberjaya.
|
Ah, thanks a lot for the prompt reply. Couldn't search LYN for it due to word limit.
|
|
|
May 5 2007, 07:53 PM
|
|
Junior Member
330 posts Joined: Mar 2005 From: JB-SG
|
any know who got help ppl paint their casing??
he he...i want pearl white color |
|
|
May 6 2007, 12:41 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Call up Uncle Ianho through PM or drop him a message in his thread over Garage Sales there...
|
|
|
May 6 2007, 03:45 AM
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
QUOTE(Doom @ May 4 2007, 05:17 PM) Get those branded manufacturer case if possible such as HP, Dell and etc... wah..where to get? |
|
|
May 6 2007, 12:10 PM
|
Senior Member
2,415 posts Joined: Nov 2004 From: Cheras
|
Is Coolermaster Elite 331 casing a good buy ? Anyone have it ? Mind to give some opinion on it ?
 This post has been edited by ccy1989: May 6 2007, 12:10 PM |
|
|
May 6 2007, 02:55 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(ccy1989 @ May 6 2007, 12:10 PM) Is Coolermaster Elite 331 casing a good buy ? Anyone have it ? Mind to give some opinion on it ? i hv owned it before...i think the chasis is quite the same with centurion 5..but..overall,i would recommend c5 rather than this 331... u can topup abThis post has been edited by fo33il: May 6 2007, 02:56 PM |
|
|
May 7 2007, 04:38 AM
|
Junior Member
55 posts Joined: May 2007 From: Kampung Pisang
|
QUOTE(cloudstrife07 @ May 4 2007, 03:11 AM) Anybody can recommend me a good looking casing around the price of RM200?it's for my mom's PC.i just want it to look "expensive" rather than some good airflow casing but ordinary design because what women usually want is the "looks" get Powerlogic Atrix 5000T, it seems incongruous if u buy Raidmax Ninja or I-cute with jet-engine for ur mom.so far my survey: 1. Raidmax Ninja RM220 PC-Zone 2. Powerlogic Atrix 5000T RM160 PC-Zone 3. I-cute casing which is like a jet-engine RM220 Centurion 5 looks cheap tho another good choice is Centurion 531, planning to buy this case actually.. but suddenly changed my mind to get LL after visit this thread |
|
|
May 7 2007, 09:26 AM
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
QUOTE(Nocturnal @ May 7 2007, 04:38 AM) get Powerlogic Atrix 5000T, it seems incongruous if u buy Raidmax Ninja or I-cute with jet-engine for ur mom. ok.thx mate for ur opinion another good choice is Centurion 531, planning to buy this case actually.. but suddenly changed my mind to get LL after visit this thread i just notice the Asus Vento.anybody knows how much it cost?the one which look like an alien.AllIT has it on display.i forgot to ask them the price. |
|
|
May 7 2007, 11:12 AM
|
|
Senior Member
2,415 posts Joined: Nov 2004 From: Cheras
|
QUOTE(cloudstrife07 @ May 7 2007, 09:26 AM) ok.thx mate for ur opinion The one with Blue Colour and greyish look wan ? i just notice the Asus Vento.anybody knows how much it cost?the one which look like an alien.AllIT has it on display.i forgot to ask them the price. |
|
|
May 7 2007, 11:44 AM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
 This is the one..AFAIK, most of the lyp shops are promoting this now |
|
|
May 7 2007, 12:13 PM
|
|
Senior Member
2,415 posts Joined: Nov 2004 From: Cheras
|
Hmm....the design is quite weird actually...
|
|
|
May 7 2007, 06:30 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm . i don't like it coz it's made of too much of plastic for the covers .. and the swing doors doesn't feel solid ...
besides the size is huge but the interior isn't .... |
|
|
May 7 2007, 08:32 PM
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
QUOTE(Zicron @ May 7 2007, 11:44 AM) This is the one..AFAIK, most of the lyp shops are promoting this now |
|
|
May 7 2007, 10:56 PM
|
|
Senior Member
2,524 posts Joined: Jan 2003 From: Beneath the starry night
|
QUOTE(cloudstrife07 @ May 7 2007, 08:32 PM) yeap, that's the one.anybody knows how much is the price? This case is priced at RM499 in All IT and also ATE. It was priced at RM699 during last year's PC fair. I guess this case is not selling and most of the shops are clearing stocks.I had a chance to "molest" this case during my trip to All IT. The internal construction is quite solid (thick aluminum), but the exterior is mostly made out of plastic. One can easily get a full aluminum lian li case at much lower price.  |
|
|
May 7 2007, 11:58 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Totally agree and some how it looks like alien's head to me...
i really wonder anyone bought this case ... . |
|
|
May 8 2007, 08:18 AM
|
|
Junior Member
55 posts Joined: May 2007 From: Kampung Pisang
|
QUOTE(Doom @ May 7 2007, 11:58 PM) Totally agree and some how it looks like alien's head to me... design not bad what?. i really wonder anyone bought this case ... . the body Suppose to be a big case but intenal space very limited to me.. same size as CM Elit i guess... still consider worth for money since only 110 unit available in the market (not sure in LY or in malaysia) This post has been edited by Nocturnal: May 8 2007, 08:23 AM |
|
|
May 8 2007, 03:03 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
It's not a practical design to have scuh large case from apperance but ended with limited working space within it.
beside with the amount of money paid for it just for the sake of "Asus" brand ?? come on be more realistic ... of course it's still up to the individual preference but it surely not mine.. no offense just to share the opinion here,, |
|
|
May 8 2007, 03:28 PM
|
|
Senior Member
2,524 posts Joined: Jan 2003 From: Beneath the starry night
|
QUOTE(Nocturnal @ May 8 2007, 08:18 AM) design not bad what?. Only 110 units in the market? you sure about that? the body Suppose to be a big case but intenal space very limited to me.. same size as CM Elit i guess... still consider worth for money since only 110 unit available in the market (not sure in LY or in malaysia) Anyway, design is kinda cool if you ask me, but too much plastic turns me off. |
|
|
May 9 2007, 12:02 AM
|
Junior Member
483 posts Joined: Jan 2006
|
can anyone recommend me a nice and stylish SFF casing.. i rembered there was one SFF casing with the acrylic side panel.. anyone got pictures of those or any casing taht is better than that..
|
|
|
May 9 2007, 10:33 AM
|
Junior Member
73 posts Joined: Apr 2007 From: Gombak Island
|
any review and comment of raidmax ninja case. thinking of sapu 1. where can get and price info.. or any reccomendation anything look alike dat.. thanx
|
|
|
May 9 2007, 04:45 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(lolo(tm) @ May 9 2007, 10:33 AM) any review and comment of raidmax ninja case. thinking of sapu 1. where can get and price info.. or any reccomendation anything look alike dat.. thanx here u are...http://www.tweaknews.net/reviews/raidnin/ http://www.bigbruin.com/reviews05/raidmaxn...ndex.php?file=1 http://www.tweaktown.com/reviews/881/raidm...view/index.html user's review: http://www.newegg.com/Product/ProductRevie...N82E16811156177 i think other casing that look alike raidmax maybe asus vento...but, i like raidmax better....(Raidmax RX-9) u can asking for assistance in raidmax thread Raidmax League.... |
|
|
May 9 2007, 05:11 PM
|
|
Junior Member
55 posts Joined: May 2007 From: Kampung Pisang
|
QUOTE(Doom @ May 8 2007, 03:03 PM) It's not a practical design to have scuh large case from apperance but ended with limited working space within it. also not mine actually.. beside with the amount of money paid for it just for the sake of "Asus" brand ?? come on be more realistic ... of course it's still up to the individual preference but it surely not mine.. no offense just to share the opinion here,, but my brother really obsessed about those case..QUOTE(hypermax @ May 8 2007, 03:28 PM) Only 110 units in the market? you sure about that? err.. not very sure Anyway, design is kinda cool if you ask me, but too much plastic turns me off. , some1 told me like that lah.. dont remember who. |
|
|
May 9 2007, 06:10 PM
|
|
Senior Member
2,524 posts Joined: Jan 2003 From: Beneath the starry night
|
QUOTE(Nocturnal @ May 9 2007, 05:11 PM) also not mine actually.. I think if you want the design, raidmax ninja is not a bad choice and in addition it is much cheaper than the Asus case, although the Ninja is made of SECC and not aluminum. but my brother really obsessed about those case..err.. not very sure , some1 told me like that lah.. dont remember who. |
|
|
May 9 2007, 09:13 PM
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
so, all of u recommend to buy a ninja than a vento eh?
hmm i wonder, is the tag price RM220 from PC-Zone is with PSU or without |
|
|
May 9 2007, 09:17 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(cloudstrife07 @ May 9 2007, 09:13 PM) so, all of u recommend to buy a ninja than a vento eh? i dont think the raidmax is with a PSU..coz,almost all casing around that price is not including a PSU.... hmm i wonder, is the tag price RM220 from PC-Zone is with PSU or without yeah,I personally like raidmax than asus (ninja VS vento) |
|
|
May 9 2007, 09:35 PM
|
|
Senior Member
2,524 posts Joined: Jan 2003 From: Beneath the starry night
|
Vento is way overprice. If it is cheaper (RM300), then i would recommend it to people.
|
|
|
May 10 2007, 12:12 AM
|
|
Junior Member
483 posts Joined: Jan 2006
|
any shop in low yat selling sff casings other than the silverstone SG01.. like the microfly??
|
|
|
May 10 2007, 12:15 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
microfly aint available in LYP...nearest place u need to go to Sim Lim Square to get it. and thats in Singapore.
|
|
|
May 10 2007, 09:27 AM
|
|
Senior Member
2,524 posts Joined: Jan 2003 From: Beneath the starry night
|
QUOTE(ggoo @ May 10 2007, 12:12 AM) any shop in low yat selling sff casings other than the silverstone SG01.. like the microfly?? Get Shuttle XPC, smaller but more expensive. |
|
|
May 10 2007, 09:25 PM
|
Senior Member
635 posts Joined: Feb 2006
|
I would like to know,if there is any affordable quality casing that can fit 2 120mm fans one at the front and one at the back and also enough space for a 8800gtx.
|
|
|
May 10 2007, 09:39 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
There are many cases fit ur requirements, Lian Li, Silverstone, CoolerMaster and etc...
maybe u could mention about ur budget /// |
|
|
May 10 2007, 10:58 PM
|
|
Senior Member
635 posts Joined: Feb 2006
|
just say rm250 tops?
|
|
|
May 10 2007, 11:03 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm then:
Coolermaster Centurion series RM200 Lian Li PC-007, PC-7S RM238 (recommended for full aluminum) |
|
|
May 10 2007, 11:11 PM
|
|
Senior Member
635 posts Joined: Feb 2006
|
the pc-7s is not bad.does it have a transparent side panel?
|
|
|
May 10 2007, 11:18 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
If u want u could ask ATE can sell with transparent side panel or not ..
|
|
|
May 11 2007, 03:36 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(Nemesis181188 @ May 10 2007, 09:25 PM) I would like to know,if there is any affordable quality casing that can fit 2 120mm fans one at the front and one at the back and also enough space for a 8800gtx. Well, the LL PC-7S does not original comes with 2 * 12cm fan for the front. Only one. But of course you can mod it or fit in a fan extension on the 5.25" panel...QUOTE(Nemesis181188 @ May 10 2007, 11:11 PM) the pc-7s is not bad.does it have a transparent side panel? No.It does not.You will need to get another side panel or mod it.. |
|
|
May 11 2007, 03:58 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(akachester @ May 11 2007, 03:36 PM) Well, the LL PC-7S does not original comes with 2 * 12cm fan for the front. Only one. But of course you can mod it or fit in a fan extension on the 5.25" panel... I think he meant front 1*12cm fan and 1*12cm at the back.. No.It does not.You will need to get another side panel or mod it.. This post has been edited by Zicron: May 11 2007, 03:58 PM |
|
|
May 11 2007, 08:09 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Yah he said two fans but one for the front while another for the back ...
Basically one could really negotiate with ATE when getting the case with desirable side panel. |
|
|
May 12 2007, 10:06 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Opss..sorry for the misunderstanding..lol...
|
|
|
May 12 2007, 06:33 PM
|
Junior Member
256 posts Joined: Apr 2007
|
QUOTE(Doom @ May 11 2007, 08:09 PM) Yah he said two fans but one for the front while another for the back ... So that means that the PC-7S doesn't come with a windowed side panel but you could negotiate them to replace the normal 1 with a windowed 1? How's the price? PC-7S + window price or maybe less because you didnt take the original side panel?Basically one could really negotiate with ATE when getting the case with desirable side panel. |
|
|
May 12 2007, 10:02 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
It would be more coz the acrylic panel is more expensive than standard side panel ..
|
|
|
May 12 2007, 10:07 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
The acrylic panel i think cost about RM150 the last time i ask.Not sure about bundle price though..
|
|
|
May 12 2007, 10:12 PM
|
Senior Member
1,113 posts Joined: Jan 2005 From: <Insert interesting place>
|
hey guys, just wanna ask, can a 8800GTX fit in a Centurion 5?
|
|
|
May 12 2007, 10:21 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(Xonius @ May 12 2007, 10:12 PM) hey guys, just wanna ask, can a 8800GTX fit in a Centurion 5? Can ngam ngam fit only, might have problem if have 2 or more HDDs |
|
|
May 13 2007, 01:03 AM
|
|
Senior Member
2,415 posts Joined: Nov 2004 From: Cheras
|
Anyone know which shop at Lowyat have the cheapest Coolermaster Centurion 5 casing with transparent sidepanel ?
|
|
|
May 13 2007, 02:08 AM
|
Senior Member
4,390 posts Joined: Oct 2004 From: Cheras, Malaysia
|
Hi guys, I need help of suggestion a casing with at least 1 12cm intake fan, exhaust role might be taken over by psu with 12cm fan, Low noise will be my main concern.
At least 3 or 4 HDD rack above, 5.25' bay, at least 2 ~ 3? 2.5' bay too. Possible with cover door panel. NO TRANSPARENT SIDE PANEL, Not A BLACK CASING, only alu or piano white please, I hope you guys got what i trying to say here.. I have check out some lian-li case, some were suitable but way out my budget, RM700+, i have not decided on my budget yet, therefore i need a advice which Casing to choose for, no high end video card will be used. |
|
|
May 13 2007, 03:45 AM
|
|
Junior Member
256 posts Joined: Apr 2007
|
QUOTE(Doom @ May 12 2007, 10:02 PM) It would be more coz the acrylic panel is more expensive than standard side panel .. I mean will it be 238 + 150(PC-7S + windowed side panel) or less? Should be less right since you get 2 panels instead of 3(2ori + 1 windowed)? |
|
|
May 13 2007, 07:37 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(Sky.Live @ May 13 2007, 02:08 AM) Hi guys, I need help of suggestion a casing with at least 1 12cm intake fan, exhaust role might be taken over by psu with 12cm fan, Low noise will be my main concern. I think the casing you are looking for is indeed Thermaltake Tsunami Dream, it's:At least 3 or 4 HDD rack above, 5.25' bay, at least 2 ~ 3? 2.5' bay too. Possible with cover door panel. NO TRANSPARENT SIDE PANEL, Not A BLACK CASING, only alu or piano white please, I hope you guys got what i trying to say here.. I have check out some lian-li case, some were suitable but way out my budget, RM700+, i have not decided on my budget yet, therefore i need a advice which Casing to choose for, no high end video card will be used. 1. Aluminium 2. Got Front Door 3. Can opt for windowless sidepanel 4. Stylish too.  |
|
|
May 13 2007, 10:31 AM
|
All Stars
10,472 posts Joined: Jan 2003 From: Sarawak
|
QUOTE(ccy1989 @ May 13 2007, 01:03 AM) Anyone know which shop at Lowyat have the cheapest Coolermaster Centurion 5 casing with transparent sidepanel ? viewnet is selling at rm175. IMO, the newest black color theme looks the best. |
|
|
May 13 2007, 11:13 AM
|
|
Senior Member
2,415 posts Joined: Nov 2004 From: Cheras
|
How abt the price for Coolermaster Centurion 5 at All IT Hypermarket ?
|
|
|
May 13 2007, 12:51 PM
|
|
Senior Member
4,390 posts Joined: Oct 2004 From: Cheras, Malaysia
|
QUOTE(blessedvillain @ May 13 2007, 07:37 AM) I think the casing you are looking for is indeed Thermaltake Tsunami Dream, it's: thanks for the input i am very glad with the suggestion, after some googling and research, i found some other casing which might suit my taste, need some opinion on them.1. Aluminium 2. Got Front Door 3. Can opt for windowless sidepanel 4. Stylish too. Lian-Li 767A Lian-li 101A PC B20A Antec P180 i have not check other brand such as gigabyte, asus, silverstone, sunbeam, cooler-master, vantec, zalman etc. Any other casing from those brand which have a nice design which might suit me, you might just realised i like plain simple silver colour casing, multiple easy access hdd tray, and also 120mm IN TAKE FAN. Thanks for the input |
|
|
May 13 2007, 01:35 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(Sky.Live @ May 13 2007, 12:51 PM) thanks for the input i am very glad with the suggestion, after some googling and research, i found some other casing which might suit my taste, need some opinion on them. i can see you preference...very toned down, very non bling bling type. If I have the budget, i'll go for those too... Lian-Li 767A Lian-li 101A PC B20A Antec P180 i have not check other brand such as gigabyte, asus, silverstone, sunbeam, cooler-master, vantec, zalman etc. Any other casing from those brand which have a nice design which might suit me, you might just realised i like plain simple silver colour casing, multiple easy access hdd tray, and also 120mm IN TAKE FAN. Thanks for the input |
|
|
May 14 2007, 10:08 AM
|
|
Junior Member
55 posts Joined: May 2007 From: Kampung Pisang
|
QUOTE(ccy1989 @ May 13 2007, 11:13 AM) How abt the price for Coolermaster Centurion 5 at All IT Hypermarket ? All IT selling at RM179.QUOTE(Sky.Live @ May 13 2007, 12:51 PM) thanks for the input i am very glad with the suggestion, after some googling and research, i found some other casing which might suit my taste, need some opinion on them. what about CoolerMaster Praetorian 730?. Lian-Li 767A Lian-li 101A PC B20A Antec P180 i have not check other brand such as gigabyte, asus, silverstone, sunbeam, cooler-master, vantec, zalman etc. Any other casing from those brand which have a nice design which might suit me, you might just realised i like plain simple silver colour casing, multiple easy access hdd tray, and also 120mm IN TAKE FAN. Thanks for the input i heard about some hardisk noise on this cassing, but i think u can apply some rubber washer to sort that out. |
|
|
May 14 2007, 05:19 PM
|
Senior Member
627 posts Joined: May 2006 From: Terengganu
|
Any recommendation for casing which are around RM150-200?
Can I get a transparent window with that price? If not, how low can it be? |
|
|
May 14 2007, 05:50 PM
|
|
Senior Member
1,304 posts Joined: Nov 2005 From: A place
|
QUOTE(lswang @ May 14 2007, 05:19 PM) Any recommendation for casing which are around RM150-200? if wanna get a cool look with not bad air flow can try Centurion 5 <~ Nice casing stick with me for 2 year... and finally i retired it lol..... in 2 year time with me it giv me good exprience!! Can I get a transparent window with that price? If not, how low can it be? |
|
|
May 14 2007, 07:13 PM
|
|
Senior Member
627 posts Joined: May 2006 From: Terengganu
|
Heh, thanks.
How about silverstone TJ03? Do you have any idea about it? |
|
|
May 14 2007, 08:43 PM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(lswang @ May 14 2007, 07:13 PM) Heh, thanks. TJ03 is a lovely classic case. U can c that the Hi end Custom PC company called Falcon Northwest is still using it for all their hi end rigs. How about silverstone TJ03? Do you have any idea about it? |
|
|
May 14 2007, 08:59 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
TJ03 is certainly over RM 1k, which is over your budget by 5 times
|
|
|
May 14 2007, 11:08 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(Bliz @ May 14 2007, 08:59 PM) TJ03 is certainly over RM 1k, which is over your budget by 5 times TJ03 rm189 at bulkTJ09 only over 1k |
|
|
May 15 2007, 12:23 AM
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
guys, will Coolermaster GeminiII wit 2 12cm fans on it fit in CM Centurion 532?
|
|
|
May 15 2007, 12:33 AM
|
|
Senior Member
627 posts Joined: May 2006 From: Terengganu
|
QUOTE(Zicron @ May 14 2007, 11:08 PM) TJ03 rm189 at bulk Are you sure? Great. I'm gonna buy that monster! TJ09 only over 1k Do you know what is it retail price? And can you show me the bulk? I cannot find it..This post has been edited by lswang: May 15 2007, 12:38 AM |
|
|
May 15 2007, 12:42 AM
|
|
Senior Member
2,239 posts Joined: Jun 2006 From: K.L
|
QUOTE(james2306 @ May 15 2007, 12:23 AM) guys, will Coolermaster GeminiII wit 2 12cm fans on it fit in CM Centurion 532? dun really think so.. but u can check their website.. they have examples which CM casing can fit. |
|
|
May 15 2007, 01:14 AM
|
Senior Member
3,593 posts Joined: Feb 2005 From: ***Penang***
|
QUOTE(z3r0717 @ May 15 2007, 12:42 AM) dun really think so.. but u can check their website.. they have examples which CM casing can fit. I think it should fits laSome really depending on the motherboard socket placing |
|
|
May 15 2007, 01:17 AM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
ok...thx for the info..
BTW, whr can i get lian li cases? and Silverstone cases too? This post has been edited by james2306: May 15 2007, 01:26 AM |
|
|
May 15 2007, 01:31 AM
|
|
Senior Member
2,239 posts Joined: Jun 2006 From: K.L
|
QUOTE(james2306 @ May 15 2007, 01:17 AM) ok...thx for the info.. sure np.. BTW, whr can i get lian li cases? and Silverstone cases too? Lian li cases from ATE @ LYP. Silverstone cases from Edifier show room @ LYP Or from BULKS |
|
|
May 15 2007, 07:12 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(Zicron @ May 14 2007, 11:08 PM) TJ03 rm189 at bulk are u damn sure TJ09 only over 1k that's dirt cheap, RM189 for an aluminum case with a superior spec for it if u are rite bout this, show us the link, i bet it took only 1 day for the stocks to finish, damn RM189 with:
» Click to show Spoiler - click again to hide... « sadly, too good to be true |
|
|
May 15 2007, 08:07 AM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
sorry im n00b, got lots of questions
im looking for a BIG case, i need lots of space Fully alloy body ( hate metal ) 2 fans, (intake,exhaust) around RM200-300 styling doesn't really matter thx for all ur help guys! |
|
|
May 15 2007, 01:20 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(lswang @ May 15 2007, 12:33 AM) Are you sure? Great. I'm gonna buy that monster! Do you know what is it retail price? And can you show me the bulk? I cannot find it..QUOTE(E-J@1 @ May 15 2007, 07:12 AM) are u damn sure Really sorry, i mistaken the NT03 as TJ 03 that's dirt cheap, RM189 for an aluminum case with a superior spec for it if u are rite bout this, show us the link, i bet it took only 1 day for the stocks to finish, damn RM189 with:
» Click to show Spoiler - click again to hide... « sadly, too good to be true Here is some silverstone bulk Edit by mod: Bulk links deleted. Pls dont link any garage sales stuff in here. This post has been edited by ianho: May 18 2007, 09:18 PM |
|
|
May 15 2007, 01:36 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(james2306 @ May 15 2007, 08:07 AM) sorry im n00b, got lots of questions PC-7S, PC-7 Plus from lian li seems to be fine..im looking for a BIG case, i need lots of space Fully alloy body ( hate metal ) 2 fans, (intake,exhaust) around RM200-300 styling doesn't really matter thx for all ur help guys! |
|
|
May 15 2007, 04:42 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
guys,
know any shops in LY plaza that sell casing accessories, like fan filter, good quality fans, UV lamps...etc.? I know there are a lot, but any specific or favourite ones from you guys? or recommendation? This post has been edited by blessedvillain: May 15 2007, 05:25 PM |
|
|
May 15 2007, 05:54 PM
|
|
Senior Member
627 posts Joined: May 2006 From: Terengganu
|
QUOTE(E-J@1 @ May 15 2007, 07:12 AM) are u damn sure Do you know the retail price for it? Or maybe the cheapest it can be? Its price range. Thanks. that's dirt cheap, RM189 for an aluminum case with a superior spec for it if u are rite bout this, show us the link, i bet it took only 1 day for the stocks to finish, damn RM189 with:
» Click to show Spoiler - click again to hide... « sadly, too good to be true |
|
|
May 15 2007, 07:43 PM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
QUOTE(akachester @ May 15 2007, 01:36 PM) PC-7S, PC-7 Plus from lian li seems to be fine.. kewl they look nice.. any idea on the price? exact price? |
|
|
May 15 2007, 07:50 PM
|
Senior Member
1,810 posts Joined: Mar 2007
|
Hey need some recommendations for a medium tower casing arnd RM200-RM250. Colour scheme preferably black and red with transparent side. Any brand is welcome
. Preferably without PSU coz I wont know where to throw it This post has been edited by joe_star: May 15 2007, 07:51 PM |
|
|
May 15 2007, 10:05 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(james2306 @ May 15 2007, 07:43 PM) kewl they look nice.. It is around RM238 for 7S while PC-7 is about RM288... any idea on the price? exact price? QUOTE(joe_star @ May 15 2007, 07:50 PM) Hey need some recommendations for a medium tower casing arnd RM200-RM250. Colour scheme preferably black and red with transparent side. Any brand is welcome Hmm it's hard to fine a case that comes with red color or partially red besides raidmax .. however the price is beyond ur expectation ... Preferably without PSU coz I wont know where to throw it |
|
|
May 15 2007, 10:51 PM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
QUOTE(Doom @ May 15 2007, 10:05 PM) It is around RM238 for 7S while PC-7 is about RM288... kewl, got details on those two, bro?does it come wit PSU? side panels? fans? im sory if this fells too much, all ur help is greatly appreciated |
|
|
May 15 2007, 11:09 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
Seller irangan, in bulk order is selling for RM220 for PC-7S without wheels. he just pm me.
|
|
|
May 15 2007, 11:36 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(james2306 @ May 15 2007, 10:51 PM) kewl, got details on those two, bro? It does not come with PSU and it comes with standard side panel and fans as well ... does it come wit PSU? side panels? fans? im sory if this fells too much, all ur help is greatly appreciated QUOTE(blessedvillain @ May 15 2007, 11:09 PM) Seller irangan, in bulk order is selling for RM220 for PC-7S without wheels. he just pm me. hmm .. should check it out ... |
|
|
May 16 2007, 11:29 PM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
kewl. thx for the help!
just 1 last question! i promise! any idea how much a Lian Li PC-G7 (A or B) is here? its the VERY LAST ONE, i give u my word |
|
|
May 16 2007, 11:33 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(james2306 @ May 16 2007, 11:29 PM) kewl. thx for the help! No longer availablejust 1 last question! i promise! any idea how much a Lian Li PC-G7 (A or B) is here? its the VERY LAST ONE, i give u my word You can however try 2nd hand |
|
|
May 17 2007, 10:27 PM
|
Senior Member
841 posts Joined: Jan 2005 From: Penang > Parit Buntar > Bagan Serai > Taiping
|
Guys.. need a little help here choosing a good chasing. I'm going to get my self a 8800GTS soon... and just only realize how long the card is
Longer than my 6800GS. And my 6800GS... almost touch my harddisk drive due to my normal 'decent' size of casing. So now I need to get myself a new casing that will definitely be long enough to house my 8800GTS without touching the harddisk And now... I'm putting my budget around RM200 for casing. Currently Cooler Master Elite 331 and PowerLogic Atrix 5000G has caught my attention. Didn't know the full size of it though as I only look at the picture from the internet. Between these two casing... which one is a better choice?? And second.. any other recommendation for me?? I'll be glad to accept it Thanks in advance... |
|
|
May 17 2007, 10:46 PM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
QUOTE(Phoenixwunin @ May 17 2007, 10:27 PM) Guys.. need a little help here choosing a good chasing. I'm going to get my self a 8800GTS soon... and just only realize how long the card is This thread will help youLonger than my 6800GS. And my 6800GS... almost touch my harddisk drive due to my normal 'decent' size of casing. So now I need to get myself a new casing that will definitely be long enough to house my 8800GTS without touching the harddisk And now... I'm putting my budget around RM200 for casing. Currently Cooler Master Elite 331 and PowerLogic Atrix 5000G has caught my attention. Didn't know the full size of it though as I only look at the picture from the internet. Between these two casing... which one is a better choice?? And second.. any other recommendation for me?? I'll be glad to accept it Thanks in advance... NVIDIA 8800GTX "Will It Fit" But basically, the CM 331 is more than enough to house a 8800GTS |
|
|
May 17 2007, 11:25 PM
|
|
Senior Member
841 posts Joined: Jan 2005 From: Penang > Parit Buntar > Bagan Serai > Taiping
|
omg... that thread has so many post to go through
Well... I assume CM 331 refers to Cooler Master Elite 331 correct?? Then.. what about owerLogic Atrix 5000G... the LCD temp infront of it looks kinda cool... *I'm kinda noob in casing segment.. hopefully sifu here can guide me and show me the light... |
|
|
May 17 2007, 11:57 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
go with the CM...the powerlogic is of poor build quality...the LCD is also practically useless... tends to die off
|
|
|
May 18 2007, 12:20 AM
|
|
Senior Member
841 posts Joined: Jan 2005 From: Penang > Parit Buntar > Bagan Serai > Taiping
|
oh... okay then. Thanks for your advice on that..
Now I'll definitely go for Cooler Master.. thanks a lot Just wondering though if CM 311 is a good casing now.. among other Cooler Master's casings.. but I'll post that question in Cooler Master topic. |
|
|
May 18 2007, 12:54 AM
|
Junior Member
133 posts Joined: Jan 2003 From: Kajang
|
Hi guys, currently i have 5 x hdds and 2 x optical drives, it's almost too crowded for my old enlight casing, so im thinking of changing it.
I need something that can fit all those drives while still having maybe one or two spare slots, and most importantly, good sound proofing. I can spend up to 500 if it really worths it. If it is ok, please tell me where to buy too, thanks~ |
|
|
May 18 2007, 10:43 AM
|
|
Senior Member
899 posts Joined: Mar 2005 From: Klang
|
Better if you could add up to rm900, get a lian li v1000, silverstone tj-07(rm1200), or CM stacker 830(rm800++)
|
|
|
May 18 2007, 11:20 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Unless u go for full tower else it would be hard to store 5 hdds with 2 optical drives in the case without having sound leakage ....
for that amount of budget it's kind of hard .... only goes up to full tower budget could get u the desired case... |
|
|
May 18 2007, 09:05 PM
|
|
Senior Member
627 posts Joined: May 2006 From: Terengganu
|
QUOTE(ianho @ May 14 2007, 08:43 PM) TJ03 is a lovely classic case. U can c that the Hi end Custom PC company called Falcon Northwest is still using it for all their hi end rigs. Does anybody know the price for it? |
|
|
May 18 2007, 10:21 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm u could ask Gary from uglyvamp .. he's there are singapore where lots of Silverstone case available from the shop there...
|
|
|
May 19 2007, 12:02 AM
|
|
Junior Member
133 posts Joined: Jan 2003 From: Kajang
|
Full tower
800 upwards is a little too expensive to me... How about Silverstone TJ06? the price tag is a little over 500, still pretty much acceptable by me |
|
|
May 19 2007, 07:40 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(zhiyung @ May 19 2007, 12:02 AM) Full tower go for it, the case can fit: 800 upwards is a little too expensive to me... How about Silverstone TJ06? the price tag is a little over 500, still pretty much acceptable by me
two things i dislikes bout this case:
|
|
|
May 19 2007, 01:54 PM
|
|
Junior Member
133 posts Joined: Jan 2003 From: Kajang
|
Does it provide ample sound proofing? I know im asking a lot coz i have like 5 hdds and this case is like 500 only... but if it will be noisy also, i might as well stay with my old one...
|
|
|
May 19 2007, 03:35 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
How bout Antec P180? New one about RM600 and can fit 6HDDs in total
|
|
|
May 20 2007, 10:27 PM
|
|
Junior Member
69 posts Joined: Jan 2003
|
anyone know where i can buy dell dimension casing ?
i like the casing la. but don't know where to buy casing-only... then put in other hardwares.. the casing should be able to support standrard hardware gua... anyone ? Added on May 20, 2007, 10:39 pm QUOTE(cchiuyi @ May 20 2007, 10:27 PM) anyone know where i can buy dell dimension casing ? sorry... the casing is.. smaller geh..i like the casing la. but don't know where to buy casing-only... then put in other hardwares.. the casing should be able to support standrard hardware gua... anyone ?  This post has been edited by cchiuyi: May 20 2007, 10:39 PM |
|
|
May 20 2007, 10:42 PM
|
Senior Member
1,464 posts Joined: Dec 2004
|
i don't think u can buy the casing,
there are many other nice casings head over to the recommendation section for recommendation This post has been edited by deric88: May 20 2007, 10:44 PM |
|
|
May 20 2007, 10:46 PM
|
 
Staff
7,948 posts Joined: Jan 2005 From: Soviet Sarawak
|
|
|
|
May 20 2007, 10:58 PM
|
|
Junior Member
69 posts Joined: Jan 2003
|
wuts a LianLi ??
Casing brand ?anyway , sorry for wrong section. mod pls move ? |
|
|
May 20 2007, 11:08 PM
|
Junior Member
427 posts Joined: Mar 2007
|
i'll be looking for Coolermaster Stacker 832 lol
i wonder if lowyat have those lol |
|
|
May 20 2007, 11:43 PM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
QUOTE(lucifah @ May 20 2007, 10:46 PM) some shops at LYP do sell empty Dell shells is there? check it out prices are steep though. i'd rather splurge the money on a LianLi same shop with the one that sells refurbished dell lappy? |
|
|
May 21 2007, 09:37 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(Pepper @ May 20 2007, 11:08 PM) i'll be looking for Coolermaster Stacker 832 lol ATOM is selling the case ... the shop is just right ahead after getting up from the escalator.. or maybe PC-Zone also offer the case ...i wonder if lowyat have those lol |
|
|
May 21 2007, 11:11 PM
|
|
Junior Member
37 posts Joined: May 2007
|
yo guys, i need urs help
 shud i go with the Cavalier 3 or LL PC-7S? |
|
|
May 21 2007, 11:21 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
my choice....PC-7S
why? 1/ 12cm front intake vs 8cm 2/ no doors...i hate doors 3/ errr..lian li more elegant?? but then i hate the silver+black of the PC-7S |
|
|
May 21 2007, 11:25 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
Bear in mind....LL PC-7S case fans are on the noisy front...
|
|
|
May 21 2007, 11:28 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
n not forgetting the HDD cage vibrates as well...
but fans can be changed,,,n the HDD cange can be easily (& cheaply) fixed |
|
|
May 22 2007, 02:59 PM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
QUOTE(blessedvillain @ May 21 2007, 11:25 PM) Bear in mind....LL PC-7S case fans are on the noisy front... dun really mind that part...becoz fan can always be changed |
|
|
May 22 2007, 05:16 PM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
guys, any idea if MyATE will bring in PC-G7 again?
if they do, how much? and when? |
|
|
May 22 2007, 05:19 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmmm the thing is it's not in production anymore of not mistaken ..
so unless anyone could buy from online store from other countries that still keep the stock ... else there's very little chance for the case appear in the store front for now .. |
|
|
May 22 2007, 06:22 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
|
|
|
May 22 2007, 11:09 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
New casing from Zalman.
Make no mistake that this is not the same model with Zalman Fatal1ty FC-ZE1 Casing. This is a different model, not sure about either the design is the same or not. Take a peek. Zalman Z-MACHINE GT1000 Official Website: http://www.zalman.co.kr/eng/product/view.a...dx=260&code=031          This post has been edited by sHawTY: May 22 2007, 11:12 PM |
|
|
May 22 2007, 11:17 PM
|
Junior Member
277 posts Joined: Apr 2006 From: PJ
|
Wow. Nice case! They finally dumped the shameless fatality branding.
|
|
|
May 22 2007, 11:20 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(tyrion4 @ May 22 2007, 11:17 PM) Wow. Nice case! They finally dumped the shameless fatality branding. Not actually right.The Fatal1ty case is still up & selling. It's just that this new model doesn't have that buggers name anymore. If you look carefully, you'll see the differences between this casing and the Fatal1ty casing. |
|
|
May 23 2007, 02:08 AM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
why do i feel like the design of the case is like lianli's?
|
|
|
May 23 2007, 05:50 AM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(kalakatu @ May 23 2007, 02:08 AM) why do i feel like the design of the case is like lianli's? wow!!! zalman!!!it looks alike..... but,i'm pretty sure this price wont be the same like Lian Li's (must be expensive) |
|
|
May 23 2007, 09:57 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Still look better with Red LED though to me..lol..Good job in ditching the Over-Hyped Fatal1ty branding and come bring the price down...lol...
|
|
|
May 23 2007, 10:06 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(akachester @ May 23 2007, 09:57 AM) Still look better with Red LED though to me..lol..Good job in ditching the Over-Hyped Fatal1ty branding and come bring the price down...lol... That's true, the one that comes with Red LED's look better. |
|
|
May 23 2007, 09:47 PM
|
Senior Member
1,262 posts Joined: Aug 2006 From: Butterworth, Penang
|
Nice case.
How about the cooling? Can it beat the silverstone TJ series? |
|
|
May 24 2007, 08:55 PM
|
Senior Member
6,562 posts Joined: Jan 2003
|
Anyone has any idea where to get the Antec P182/P182SE?
|
|
|
May 24 2007, 10:39 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hmm .GT1000.. a case with very thick construction but not practical. .
especially the dual front intake fans.... although it looks nice but just to much of maintenance hassle in the end of day . . . . |
|
|
May 25 2007, 12:10 AM
|
|
Junior Member
256 posts Joined: Apr 2007
|
Although without the fatal1ty brand this case should be quite expensive though since it's Zalman
This post has been edited by [KY]: May 25 2007, 12:10 AM |
|
|
May 25 2007, 01:03 PM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
|
|
|
May 25 2007, 01:16 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
|
|
|
May 25 2007, 01:19 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Lol..To be honest, i kinda like those small form cases that comes with Acer or HP computers. So compact and nice..
|
|
|
May 25 2007, 02:14 PM
|
|
Senior Member
2,323 posts Joined: Apr 2006 From: Somewhere I Belong
|
QUOTE(E-J@1 @ May 25 2007, 01:16 PM) so its a repost ? sorry about that... but i like the second case more so compact and the size is like 3.5 drive |
|
|
May 25 2007, 05:57 PM
|
|
Junior Member
40 posts Joined: May 2007
|
uh...is coolermaster Praetorian 732 cool and quiet? airflow ok?
|
|
|
May 28 2007, 01:52 PM
|
|
Newbie
1 posts Joined: May 2007
|
QUOTE(rosihan @ Apr 4 2007, 09:30 PM) im looking for raidmax ninja black or smilodon one where can i get it if i go 2 LYP? actually i am looking for this casing too. can anyone help?n how much izzit??? thanks |
|
|
May 28 2007, 03:50 PM
|
Junior Member
21 posts Joined: May 2006 From: Kuala Lumpur
|
that was a nice case !!!
how much for that case ??? in RM ! |
|
|
May 28 2007, 10:05 PM
|
Senior Member
1,140 posts Joined: Sep 2005 From: Equine Park
|
how about cooler master mystique 631? is this casing's airflow ok? bcos i kinda like the curvy design and the surface finishing.. anyone using it?
|
|
|
May 29 2007, 09:05 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(matikatak @ May 28 2007, 01:52 PM) actually i am looking for this casing too. can anyone help? I recommend Lian Li casings!!thanks |
|
|
May 29 2007, 10:11 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Not everyone like the classy look of aluminum case men ...
But once one get exposed to the interior of the case .. they would love it ,,,, |
|
|
May 29 2007, 06:35 PM
|
|
All Stars
10,472 posts Joined: Jan 2003 From: Sarawak
|
QUOTE(Doom @ May 29 2007, 10:11 AM) Not everyone like the classy look of aluminum case men ... some people love the ahbeng look of raidmax ninja/samurai or alienware.But once one get exposed to the interior of the case .. they would love it ,,,, but once they see the shiny interior of aluminum casing...love at first sight. |
|
|
Jun 1 2007, 12:40 PM
|
|
Senior Member
627 posts Joined: May 2006 From: Terengganu
|
I just get a reply.
QUOTE Bcoz of the full aluminium design, and then recently they've made this casing a special order unit, and then it's no longer part of their regular items, therefore, they've framed this casing as part of their museum, so, this casing no longer being produced and it'll be expensive. The price of the TJ03 is similar to the TJ07 and 09. I don't think I can afford that soaring high price. So, any recommendation for full tower aluminium casing? Price should be around 400-500. I want simple looking casing. Thanks |
|
|
Jun 1 2007, 12:45 PM
|
Senior Member
867 posts Joined: May 2007 From: PJ
|
|
|
|
Jun 1 2007, 12:50 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
lswang rm400 ~rm500 can get a aluminum case with nice airflow and interior, i get my pc60-plus around rm 400, pc-G7 simple and nice also.
This post has been edited by vincent09: Jun 1 2007, 12:51 PM |
|
|
Jun 1 2007, 12:52 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(wevilli @ Jun 1 2007, 12:45 PM) how about lian-li pc g7 ? i m using it.. great casing and nice ! hahaha....it's a great casing! a lot of ppl wish to get a hand on that casing! I cant find it myself, so went for other lian li casing instead. so far it's serving me well...but the fan noise is a bit on the loud side....how's your casing fan noise btw? |
|
|
Jun 1 2007, 01:01 PM
|
|
Senior Member
627 posts Joined: May 2006 From: Terengganu
|
QUOTE(wevilli @ Jun 1 2007, 12:45 PM) how about lian-li pc g7 ? i m using it.. great casing and nice ! QUOTE(vincent09 @ Jun 1 2007, 12:50 PM) lswang rm400 ~rm500 can get a aluminum case with nice airflow and interior, i get my pc60-plus around rm 400, pc-G7 simple and nice also. How much is lian-li pc g7? Vincent just said that he can't get that casing. So, is it possible to get it? P/S I want a little bit taller casing. around 590mm like TJ03 or perhaps bigger. EDIT: How about Lian Li PC-A10 Aluminum Case? Do you have any idea ho much does it cost? BTW, where can I check the price for lian lis' casing? And where can I get it? This post has been edited by lswang: Jun 1 2007, 01:21 PM |
|
|
Jun 1 2007, 01:47 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
forget the PC-G7
u cant get it anymore....and if/when it comes back, which is god knows when, the price will roughly be around the RM300 mark. as for price of other lian li casings...refer here taken from lian li league thread  |
|
|
Jun 1 2007, 02:09 PM
|
|
Senior Member
627 posts Joined: May 2006 From: Terengganu
|
The price list is too blur. So, I want to ask is it the price for PC-201A is 588 and PC-201B is 898? I hope you can spot it out and give me confirmation.
|
|
|
Jun 1 2007, 02:32 PM
|
|
Junior Member
433 posts Joined: Dec 2006 From: kerajaaan langit
|
QUOTE(lswang @ Jun 1 2007, 02:09 PM) The price list is too blur. So, I want to ask is it the price for PC-201A is 588 and PC-201B is 898? I hope you can spot it out and give me confirmation. price for 201A is RM888....201B RM898...usually the price for black casing will be rm10 higher.... |
|
|
Jun 1 2007, 02:44 PM
|
|
Senior Member
627 posts Joined: May 2006 From: Terengganu
|
Fui yoh!
Every single of my dream casing cost me almost 1k. sigh. Thanks for the price list. madman And thaks for your sharp eye fo33il. Er, where can I get lian li casing in LYP. I have to go to LYP one day to see all the casing(every casing, not lian li only.). And which shop is recommended? |
|
|
Jun 1 2007, 02:45 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
ATE...theyre the main players for Lian Li....distributor etc etc
got 1 or 2 other shops selling Lian li but limited models and mostly low end. i wouldnt bother with them...id just go straight to ATE for any Lian Li stuff |
|
|
Jun 1 2007, 02:54 PM
|
|
Senior Member
627 posts Joined: May 2006 From: Terengganu
|
Where is ATE? which floor? Currently, there are only silverstone and lian li have affordable aluminium casing?
And what is the model for the stylish lian li casing? Its shape like number 6 |
|
|
Jun 1 2007, 03:13 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(lswang @ Jun 1 2007, 02:54 PM) Where is ATE? which floor? Currently, there are only silverstone and lian li have affordable aluminium casing? oh...the snail looking casing....it's lian li memorial series. Last time I check was RM9XX but i think now ATE is giving special discount when I asked a week ago. It should be RM7XX if i didnt hear it wrongly..And what is the model for the stylish lian li casing? Its shape like number 6 |
|
|
Jun 1 2007, 03:46 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Hehe when i plan to get the G7 already no stock already. No choise then i take PC60-plus, but until now i still like it very much.
|
|
|
Jun 1 2007, 04:18 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(lswang @ Jun 1 2007, 02:54 PM) Where is ATE? which floor? Currently, there are only silverstone and lian li have affordable aluminium casing? Ate is at 2nd floor , Lot 2-07.... And what is the model for the stylish lian li casing? Its shape like number 6 QUOTE(blessedvillain @ Jun 1 2007, 03:13 PM) oh...the snail looking casing....it's lian li memorial series. Last time I check was RM9XX but i think now ATE is giving special discount when I asked a week ago. It should be RM7XX if i didnt hear it wrongly.. Its RM777.. nice deal for the size given .. QUOTE(vincent09 @ Jun 1 2007, 03:46 PM) Hehe when i plan to get the G7 already no stock already. No choise then i take PC60-plus, but until now i still like it very much. it's one of the best casing they have every produced .. (LL)..Anyway to all that interested with Lian Li PC-A10 .. now u could bring ur old case for trade in programme .. ATE would give RM200 of rebate for PC-A10 for the old case .. that makes the selling price is RM598..... |
|
|
Jun 1 2007, 05:29 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
Doom any old case also can or old Lian Li case???
|
|
|
Jun 1 2007, 06:14 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Any old ATX case and they (ATE) would valid whether it's acceptable or not ..
|
|
|
Jun 1 2007, 09:55 PM
|
|
Senior Member
1,710 posts Joined: Apr 2006 From: Klang, Selangor D.E.
|
I see, but rm500 buy a case for me also ...dead XD. Keep money first for buy other thing.
|
|
|
Jun 2 2007, 02:01 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
Thermalright Heatpipe Cooling Case Series
 HSC-100  HSC-300  HSC-500  HSC-700  really wonder how would a "heatpipe" case really helps cooling the case as i bet there would be no direct contact with the heat generator component what cha all think? really like the tower heatpipe casing |
|
|
Jun 2 2007, 08:25 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(vincent09 @ Jun 1 2007, 09:55 PM) I see, but rm500 buy a case for me also ...dead XD. Keep money first for buy other thing. heheh..It's like owing a luxury apartment to house ur precious belongings... @E-J@1 It would be like one of the Zalman silent case that features totally passive cooling .. . I wonder how heavy it would be with the heatpipe case ... |
|
|
Jun 2 2007, 11:37 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(Doom @ Jun 2 2007, 08:25 AM) heheh..It's like owing a luxury apartment to house ur precious belongings... just hope their quality is nice, weight also is a problem, as long it stay below 8kg alrite by me @E-J@1 It would be like one of the Zalman silent case that features totally passive cooling .. . I wonder how heavy it would be with the heatpipe case ... really, really like the tower heatpipe case, the design is unique like those custom design case |
|
|
Jun 2 2007, 11:41 AM
|
|
Junior Member
256 posts Joined: Apr 2007
|
Are those the heatpipes? Or those are the handle bars?
|
|
|
Jun 2 2007, 09:06 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
those are heat pipes with fins to allow heat dissipation ..
|
|
|
Jun 3 2007, 11:20 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
I think the Zalman still looks way better than this though..The good thing is they have those SFF version as well..
|
|
|
Jun 3 2007, 04:59 PM
|
Junior Member
467 posts Joined: Mar 2006
|
where to buy microatx case?
 This post has been edited by capix: Jun 3 2007, 04:59 PM |
|
|
Jun 3 2007, 05:18 PM
|
|
Senior Member
841 posts Joined: Jan 2005 From: Penang > Parit Buntar > Bagan Serai > Taiping
|
hm.. was looking for Cooler Master Elite 331 in Penang yesterday.. didn't find any.. but then stumbled across Raidmax casings. Kinda cool looking... the Ninja and Sagitta. I wonder... how good is this casing?? Does it has good airflow?? And can fit in 8800 Ultra arr??
|
|
|
Jun 7 2007, 09:14 PM
|
Junior Member
41 posts Joined: Mar 2007
|
Hi guy,
I assemble a machine at Low Yat 3 month ago. I wonder what can i do with this machine, after reading some of the nice article post by you guy I have this idea to pim my Machine too from inside to outside, but i just don know where to start. Will you guy give me some idea where should i start, how can i go about, How to max or any recommendation to max the machine performance. My rig: EliteGroup 945P-A V3.0 Pentium D 3.4ghz WinFast Nvidia PX7900 GS TDH 256mb DDR3 Sound Blaster Live 5.1 Corsair 1GB 667 DDR2 160G Hitachi HD 80G Seagate HD Liteon DVD +- Dual RW rom Samsung DVD rom |
|
|
Jun 7 2007, 11:21 PM
|
Junior Member
471 posts Joined: Jul 2006
|
let see some pics 1st plz
|
|
|
Jun 8 2007, 12:34 AM
|
|
VIP
15,705 posts Joined: Mar 2005 From: Tg. Rambutan
|
QUOTE(extreme.k @ Jun 7 2007, 09:14 PM) Hi guy, 1st thing u need to do is find a nice case. Start here in the case recommendations thread. I assemble a machine at Low Yat 3 month ago. I wonder what can i do with this machine, after reading some of the nice article post by you guy I have this idea to pim my Machine too from inside to outside, but i just don know where to start. Will you guy give me some idea where should i start, how can i go about, How to max or any recommendation to max the machine performance. My rig: EliteGroup 945P-A V3.0 Pentium D 3.4ghz WinFast Nvidia PX7900 GS TDH 256mb DDR3 Sound Blaster Live 5.1 Corsair 1GB 667 DDR2 160G Hitachi HD 80G Seagate HD Liteon DVD +- Dual RW rom Samsung DVD rom |
|
|
Jun 8 2007, 12:40 AM
|
Senior Member
848 posts Joined: Jan 2007 From: Ipoh Perak Malaysia
|
yaa lor dis is not hardware thread..
|
|
|
Jun 9 2007, 07:00 PM
|
|
Senior Member
841 posts Joined: Jan 2005 From: Penang > Parit Buntar > Bagan Serai > Taiping
|
got a lot of headache recently regarding case...
Well... I wish to make this simpler... so instead of me asking "Is this a good casing" and so on... how about you guys recommend me a good casing instead?? My target is a good airflow casing. Coz I think lately my system is quite hot... and I'm not staying in an aircond room too. Can you guys recommend me any good casing with good airflow for below RM300?? |
|
|
Jun 9 2007, 07:09 PM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
try go for Lian Li cases man, fully Allu, 2 13cm fans, front n back, one 8cm on the top...price abt 200-300 oni..
|
|
|
Jun 9 2007, 08:27 PM
|
|
All Stars
10,472 posts Joined: Jan 2003 From: Sarawak
|
QUOTE(james2306 @ Jun 9 2007, 07:09 PM) try go for Lian Li cases man, fully Allu, 2 13cm fans, front n back, one 8cm on the top...price abt 200-300 oni.. its 2 12cm fans, not 13cm...but certain model only. some still have the stupid 8cm exxhaust fan (PC-60)This post has been edited by Skylinestar: Jun 9 2007, 08:28 PM |
|
|
Jun 9 2007, 10:20 PM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
QUOTE(Skylinestar @ Jun 9 2007, 08:27 PM) its 2 12cm fans, not 13cm...but certain model only. some still have the stupid 8cm exxhaust fan (PC-60) oops my bad TYPO |
|
|
Jun 9 2007, 11:50 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
@Phoenixwunin
That depend on how well the case airflow u are looking for ?? for that budget maybe better just get a case with dual 12cm and do some modding .. |
|
|
Jun 10 2007, 12:53 AM
|
Senior Member
991 posts Joined: Jan 2003 From: PeNaNg 
|
QUOTE(Doom @ Jun 9 2007, 11:50 PM) @Phoenixwunin Exactly! Whn u couldnt get somtin' within ur budget, the thing 2 do is modding. Evrythin v discuss in this section revolves around modding.That depend on how well the case airflow u are looking for ?? for that budget maybe better just get a case with dual 12cm and do some modding .. Often u wont necessarily need spend hugely on casings. Simple ones can b improved by leaps & bounds |
|
|
Jun 10 2007, 10:03 AM
|
Senior Member
2,588 posts Joined: Jan 2003 From: KL-Skudai
|
Is there any casing below RM250 that have:
1)12cm intake and exhaust fan 2)8cm top blower fan 3)transparent side panel 4)fully alu |
|
|
Jun 10 2007, 10:20 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(mfa333 @ Jun 10 2007, 10:03 AM) Is there any casing below RM250 that have: Lian Li PC-7YCF [Link]1)12cm intake and exhaust fan 2)8cm top blower fan 3)transparent side panel 4)fully alu     This case comes with:
Note: PC-007FA/007-FB is the Lian Li PC-7YCF [Link] u have to add RM38.00 from your current budget |
|
|
Jun 10 2007, 11:22 AM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(mfa333 @ Jun 10 2007, 10:03 AM) Is there any casing below RM250 that have: Or..you can have this Lian Li PC-7S which I'm using also for less than RM250....and I'm loving it!! 1)12cm intake and exhaust fan 2)8cm top blower fan 3)transparent side panel 4)fully alu   |
|
|
Jun 10 2007, 12:14 PM
|
|
Senior Member
1,119 posts Joined: Jan 2007 From: USJ
|
QUOTE(blessedvillain @ Jun 10 2007, 11:22 AM) that one got no transparent side panel larr...btw, im oso gonna buy that PC-7YCF cant wait de!! |
|
|
Jun 10 2007, 12:18 PM
|
|
Senior Member
847 posts Joined: Jan 2005
|
QUOTE(james2306 @ Jun 10 2007, 12:14 PM) that one got no transparent side panel larr... you can order the transparent window from Doom....i order one from him...hehehe..fits perfectly!! btw, im oso gonna buy that PC-7YCF cant wait de!!  |
|
|
Jun 10 2007, 12:20 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(blessedvillain @ Jun 10 2007, 11:22 AM) RM238 (Silver) / RM248 (Black) plus another RM140 for transparent side panel equals to RM378 (Silver) / RM388 (Black) |
|
|
Jun 10 2007, 12:53 PM
|
|
Senior Member
841 posts Joined: Jan 2005 From: Penang > Parit Buntar > Bagan Serai > Taiping
|
QUOTE(Doom @ Jun 9 2007, 11:50 PM) @Phoenixwunin Simple casing with dual 12cm arr.. That depend on how well the case airflow u are looking for ?? for that budget maybe better just get a case with dual 12cm and do some modding .. Tell me... how important is a fan on the side panel of casing?? Should I go and search for one or the normal ones with 120cm in front and rear is enough edy?? |
|
|
Jun 10 2007, 02:29 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
it depend on how hot it ur graphic card.... if it's like those crazy monster that consumed 100 watts or more then side fan is definitely a must.. for exp: 8800 series, X1900 series and up..
if it's not too hot and the gc has a decent cooler that could dissipate heat in very short of time... then side fan may not be necessary .. |
|
|
Jun 10 2007, 05:39 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(Doom @ Jun 10 2007, 02:29 PM) it depend on how hot it ur graphic card.... if it's like those crazy monster that consumed 100 watts or more then side fan is definitely a must.. for exp: 8800 series, X1900 series and up.. If its those uber hot monster like what you say, side panel fan is need to blow air towards the GC or suck air out?if it's not too hot and the gc has a decent cooler that could dissipate heat in very short of time... then side fan may not be necessary .. |
|
|
Jun 10 2007, 06:12 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
It would be better to provide cool air in and rely on both exhaust and PSU fan to draw the hot air out ...
|
|
|
Jun 10 2007, 08:53 PM
|
Senior Member
875 posts Joined: Jan 2006 From: The Obsidian Order
|
Can someone reco a ATX casing?
-no transparent side panel -no super large buttons -whole thing metal -budget aroun RM200+ -dun care come with or without psu hope there is such casing thx alot |
|
|
Jun 10 2007, 08:56 PM
|
|
Senior Member
5,165 posts Joined: Feb 2005
|
ryder,
try looking for chieftec dragon series. absolutely awesome and i believe atx is around that price. air floor is powered by 92mm front intake, 92mm on both side panel (left and also right - just before the mobo), 92mm rear kinda good buy imho |
|
|
Jun 10 2007, 09:46 PM
|
|
Senior Member
875 posts Joined: Jan 2006 From: The Obsidian Order
|
looks nice...futureristic..
any shops in lowyat have or must pre order frm site? thx |
|
|
Jun 11 2007, 12:53 PM
|
Junior Member
159 posts Joined: Jan 2003 From: Island of relaxing
|
currently thinking of cloning a new PC as my first middle range gaming rig.... think of have a nice look casing. my budget is around RM350 without PSU.. Can i get coolermaster - ITower930(RC-930) or Mystique 631(RC-631)?? If not what is the other recommedation?
|
|
|
Jun 11 2007, 02:15 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
a colleague of mine just bought the mystique yesterday at ALL IT digimall PJ for RM360.
i also say for that kinda budget u should take a look at the Lian Li cases. |
|
|
Jun 11 2007, 02:24 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Can i get any good casing at a budget range of RM100?Or i could just get those chaplang ones?
And some shops are selling those CM casing together with PSU. Can we request to dont want the PSU? How much will it be deduct from the actual price? This post has been edited by akachester: Jun 11 2007, 02:25 PM |
|
|
Jun 11 2007, 03:41 PM
|
Elite
5,434 posts Joined: Dec 2006
|
mostly they will discount or "trade-in" the psu for rm50,
and anyone in lyn air-brushed his/her pc casing? |
|
|
Jun 11 2007, 06:14 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(AceCombat @ Jun 11 2007, 03:41 PM) mostly they will discount or "trade-in" the psu for rm50, RM50 only?Gosh..Is the bundle with CM the Extreme 430/350W one?Or some other more chaplang PSU?and anyone in lyn air-brushed his/her pc casing? The only one "branded" that are cheap enough so far is the Elite 331/330.Around RM130 but trying to excise my option here if there are plenty more.. |
|
|
Jun 11 2007, 06:24 PM
|
|
All Stars
10,472 posts Joined: Jan 2003 From: Sarawak
|
for RM100 u definitely can't even get a coolermaster. however, there are a lot of "dunno what brand" casings that are about RM100.
|
|
|
Jun 11 2007, 06:28 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(Skylinestar @ Jun 11 2007, 06:24 PM) for RM100 u definitely can't even get a coolermaster. however, there are a lot of "dunno what brand" casings that are about RM100. Which is why the CM Elite 331 is high on my list. Price in bulk sales are only about Rm130 AFAIK..Looking for other options only. Else, i just settle for it..lol.. |
|
|
Jun 12 2007, 12:07 AM
|
|
Senior Member
2,588 posts Joined: Jan 2003 From: KL-Skudai
|
QUOTE(akachester @ Jun 11 2007, 06:28 PM) Which is why the CM Elite 331 is high on my list. Price in bulk sales are only about Rm130 AFAIK..Looking for other options only. Else, i just settle for it..lol.. CM Elite 331 doesnt have transparent side casing? any other similar model with trans side panel? |
|
|
Jun 12 2007, 02:56 PM
|
|
Senior Member
6,447 posts Joined: Jan 2006
|
i hav a budget of Rm250 max for a SFF casing ....
any recommendation for me ....and any brand will do as long as it is in red or nice color ...duwan white color....thx This post has been edited by steventan85: Jun 12 2007, 02:57 PM |
|
|
Jun 12 2007, 08:22 PM
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
 , currently looking for nice, good air flow casing, silent, the spec is just like my siggy, with 3 SATA HDD, 2 SATA ODD, X1900XT fitted with HR-03, CPU Cooler is HR-01 (coming soon)...Budget : RM450 ~ RM550 (Max) Casing criteria : preferably full tower, full aluminium if possible, i want it sleek design, more "straight forward" (not to fancy though)... i'm eyeing the Lian Li PC-A71 - i think it's too pricey and still not avail in Malaysia, or how about this - Lian Li PC-201A? other brand like Silverstone and CoolerMaster (Stacker 810 only ) i might be interested too... |
|
Topic ClosedOptions
|
| Change to: |  0.2119sec
 0.37
 6 queries
 GZIP Disabled
Time is now: 3rd December 2025 - 03:33 AM |
Quote
