Buy an Asus Xonar la. Much better =p

Guys, I am feeling like getting a T45.. Does it OC a quad core well?

Yes it does. My X3320 can pass SuperPi at 500FSB.

Great to hear that!

Oh ya, in the review on the first page, one of the cons of this board is "Sometimes Corrupts my HDD" ? How come ah?

Err I haven't experienced that..maybe some other forumer can shed some light?

3.4ghz satisfy u or not??

anyone here using E5200 with this mobo ?
what FSB to NorthBridge Latch you all set ?if set to auto is it ok ?

i'm waiting for ur result 1st then decide wanna buy dis mobo or not

okok,will post up cpu-z when i got the best result.
but i am new to intel.so don't expect much from me.

Normally I set the latch to FSB1333.

my first oc result.




This post has been edited by lloyd1030: Sep 28 2008, 02:01 AM

u dun try 300fsb?

my mobo can stand 430fsb...but on X3320...

later will try 300fsb

Haha lower your multiplier and pump the FSB wei, Try to run your Ballistix synchronous with your RAM at ~ 400FSB. More performance that way..

not sure whether my proc can run at 400fsb or not.
will try it out later.
thanks for the suggestion bro.

no advise from TS or malaysian representer(coolice)??

haven seen them in here.

i got 1 more question to ask.
in dram timing section in bios,got a setting call ddr2 rcomp configuration.
which config is good or what does it do ?
kinda confusing now.

my board with my kingmax ram only configuration 1 and 3 can use.if i use fsb 1333 n ram ratio is 1:1 or 5:6 then use configuration 1,
if use fsb 1066 then my ram must use configuration 3.both the trp* <<<not sure wat name under the configuration one i use 10T or 8T ok.
if conifguration 2 really haven got luck to get it boot.haha

for the con "Sometimes Corrupts my HDD" i got experienced one time is bcos if u set the cpu clock gen there the MCH speed ar(the setting below the cpu clock gen)is 100ps,200ps,300ps.... that one if u set ur MCH to 200ps my hdd direct need use window cd to repair then just can work back.shock me that time.

Yup I used configuration 1 as well. Auto does not work at anything above FSB400.