hah?thats power connector for gcard right?

waaa...seriously i dont understand what u trying to say
theres no 4 pin power overthere,only if the 4pin that u mention about is at top of the psu

anyway the digital temp indicator show same as in bios and other temp reading software

one Q here!!!!
can i trust d temp reader on d board??
d square thingy there???

err,guys..i know theres 4pin molex overthere and it can be use to power up the gcard right?
so what is it happen to related to usb transfer rate speed?
im asking bout the usb trasfer rate recently that crazy slow..enlight me pls..i guess its a driver not serve me well am i right?

I can see an Arctic Freezer 7 and 3 HDDs. The gc doesn't look that mean though - small HSF assembly.

Under the voltage control tab you can set the voltages in increments of +0.1. Those are in addition to your default RAM voltage, so +0.1 means 1.9v.

Guys, I am feeling like getting a T45.. Does it OC a quad core well?

Yup I used configuration 1 as well. Auto does not work at anything above FSB400.

i've just got my tpower on saturday. still discovering the magic...
when i startup, i saw this:
Marvell 88SE61xx RAID Adapter
Initializing...
Adapter 1
disk information......blah blah

i'm not using RAID setup currently. any way to bypass that?

The southbridge is hotter than northbridge. is that normal?

anyone using this mothernoard with lian li casing? the backplate doesn't align with the IO ports.   if it were to align, the motherboards mounting hole will not be aligned with the stud on my casing, which is a PC-G7. currently, i'm not using the backplate. will lizard craw into my casing?

can we trust our mobo builtin temp indicator....cuz its 10*c lower than the realtemp software...which one should we trust...??

GTG

---

Added on October 12, 2008, 4:42 pmThis is what i mean....which one should i trust...??

u can see from the picture below....the "tmpin" on the cpuid is the same with tpowerII....while the e5200 temp on cpuid similar with coretemp..

if the reading on core temp is the accurate one...iam in trouble... 

GTG

the led show on mobo is the t-case temperature... u must see the core temperature on realtemp or coretemp... that is the important one..

wat crazy readings?