Advanced | CPU Configuration
C1E Support
Hardware Prefetcher
Adjacent Cache Line Prefetch
Max CPUID Value Limit
CPU TM Function
Execute-Disable Bit Capability
Core Multi-Processing
Intel C-State Tech

O.N.E
Intel SpeedStep Tech
Ratio CMOS Setting
CPU Frequency Setting
Over Clock Retry Count
FSB (Bsel) To Northbridge Latch
FSB Compensation on FineTune
DRAM Frequency
DDR2 Enchanced Mode

O.N.E | CPU Configuration
C1E Support
CPU TM Function
Intel C-State Tech
Core Multi-Processing

intel c-state tech set to disable ady?

nope & i just did

it works, thanx mate

time to torcher this mobo to da max

yes c-state.. coz got that idle² n lower the voltage.. that's why fluctuate..

hope u'll nt burn ur toys.. ehehehe.

i wonder y there is no tRC setting in bios or i misz it sumwhere?

sifu comment.

This post has been edited by kolong: Sep 3 2008, 09:21 AM

tRC? are u talking about trfc of tRD aka performance level? coz both of the setting is in the bios

does this board still have issues with CF?

not sure got issue on CF or not..
but for sure we need to rearrange the jumper on the board to enable 2nd slot..

got people say CF performance is unstable
i never try yet

y not use 64bit

Does anyone has problems with external hard drives powered by usb bus connected to this mobo?

I have a wireless G7 mouse receiver/charger and G15 keyboard connected to the usb ports at the mobo, when I try to connect any external hard drive, if it's a single usb cable then Windows will show unknown usb device error, and if I connect with a Y-type usb cable then it will recognize the hard drive but my keyboard will be unusable..the backlight on the G15 seems to fluctuate/blinking non stop and lost signal.

However, I've tried to connect the hard drive to the casing front panel usb ports with the Y cable and there's no problem.

I'm suspecting the motherboard does not provide enough power to all the usb ports at the mobo.

Previously I was using abit IP35pro and I had connected these usb devices simultaneously without a hitch

EDIT : Apparently after I tried adding a USB pci bracket from my previous mobo, the power seems to be stable now as i connected my KB and mouse receiver to the usb bracket and external HDD to the mobo usb port.

This post has been edited by SkyX: Sep 9 2008, 10:23 PM

u mean u connect all the usb directly from mobo?
if connect to G15 usb port sure cannot coz use usb v1.0..

i have no such problem.. currently using usb port for G15, MX518, wireless adapter, external HDD, thumbdrive n card reader...

isit ur psu?

this is y i'm using PS/2 mouse and keyboard...

got my motherboard 2 weeks ago from skcs46. still using borrowed E2160 and 6600GT 128mb ddr3 as i no cash just yet...
OCed by intothefantasy for me.
now running at 3ghz 333X9
got it to boot at 3.6 ghz 400x9 but didn't test stability... the vcore kind high too.. since the proc is not mine...
1st night test OC a lot of problem... turns out my corsair XMS2 DHX 4gb got prob... after exchange new 1 all runs well...

i got problem with my front audio header...
using CM690 case which give 2 connector for mobo. 1 is HD and 1 AC 97 or something i forgot. i read the manual it say only accept HD connector but it didn't work... i plug in AC 97 connector oso still not working... ish ish ish... anybody know what is the problem here? i can't seem to find any settings in the bios....( PLS HELP T_T)
just went thru the whole tread now i found out how to disable the onboard sound i wan plug in my old sound blaster live 5.1 ady just wondering if i can find driver for vista...
and i found everest temperature monitoring the same as core temp. just another option for ya all.
will post photo of the rig soon.
oh yah.. about this board of mine... in the bios if the smart fan if left unset. the CPU and system fan will run at full speed..... until u open the tpower utility.... my arctic cooling freezer 7 at full speed is like a typhoon is happening in my PC.... geli.... the harbor fan run at 4000+ rpm oso pretty noisy... lowered down to 2500rpm

EDIT: waiting money for E8600 EO and gainward ATi Radeon HD4870 Golden Sample should get both of them around next month =/

This post has been edited by hahn87: Sep 10 2008, 08:12 PM

bro,ady test on this board for e2160...got no prob at 3.3ghz.

Hard disk corruption? I am scared... Pls explain in PM...thanks

Not sure if it's PSU problem as I'm using FSP epsilon 700w and have no problem connecting all those devices together to my previous IP35pro....should I exchange the board for a new one?

state ur Vcore la abg...
or post some ss...

Attached thumbnail(s)

so.. how about the front audio header problem? anybody happens to be facing that?