More pics of my guitars and a cleaner pedal board:


Not pictured are my acoustics, my Crap Strat and my Epiphone Dot which I lovingly call Ashley, because she's blonde like Ashley Tisdale




Just removed the Carbon Copy from the chain and added it into the FX Loop directly into the back of the JCM2000 since the last picture. Sounds much better with Over Drive.

Damn..... It looks good. Now it's time to install EMG pickups!

About two days. Should be one, but I couldn't carry them all at once.

Ahhhh! Scott Pilgrim's bass! Looks freakin' awesome!!!!!

Not sure if I posted it up, but here's my re-arranged guitars.


Guitars:
On the Wall, From Left to Right, Jackson RR3, Epiphone Zakk Wylde ZV Custom (Modified with EMG 81TW/89 Coil Tap Pickups, with Zakk Wylde's Signature on the body), Schecter Synyster Custom, Dean Razorback 255, Epiphone Zakk Wylde Les Paul (Modified with EMG 81/85 Pickups), Epiphone Les Paul LP-100 (Modified with Schaller Tuners and EMG 25th Anniversary Chrome 81 pickups).
On the floor, from left to right, Epiphone Dot, Ibanez E-Gen8 (Modified with DiMarzio Evolution pickups including middle pickup and Gotoh Trem, with Herman Li's signature on the body)

Amplifiers: Laney 50w Linebacker, Vox 15VT, Marshall TSL 602 JCM2000.



Guitar Signal -> Digitech Whammy (With Herman Li's signature) -> Dunlop ZW-45 Wylde Wah ->
Morley Tripler (Split into 3 channels)
(1) Vox 15VT
(2) Boss NS-2 (In FX Loop Digitech Hardwire TL-2 Metal Distortion -> Dunlop ZW-44 Wylde Overdrive) -> MXR ZW-38 Black Label Chorus -> Marshall JCM2000 (with MXR M-169 Carbon Copy Analog Delay in the FX Loop)
(3) Korg Tuner


Not pictured are my acoustics, Squire P-Bass and my Crap Strat as well as my Vox Tonelab SE

This post has been edited by blacktrix: Dec 4 2010, 01:21 PM

After that last pic I took, I got itchy fingers and decided to hook up the Tonelab to the Laney for Triple Channel madness.......


Attached thumbnail(s)

I think it was around 6K+ from Bentley..... BEFORE they had a Curve branch.....

And yes, it sounds amazing....... well, for my use.
It's not really a super heavy metal amp, but with the Zakk Wylde OD, it's definitely a beast. Suits my playing style, and if I want to add a little more low-end to it, I pair it with a bass heavy setting on my Vox and twin channel it and it sounds pretty sweet.

I now chain a clean, delay tone to go with it on the Laney now, and it's definitely more shimmery.

If you're talking about his Epiphone Dot, then yes. It's from China, same as mine. Build quality is pretty decent and it does the job then.

WOAH! Finally got it huh?! Congrats man!!!!!!

New pedal in my FX chain......
The Wylde Phaser.....

Lol. I have a digitech whammy, a boss noise suppressor and a korg tuner too.... But just love the build and quality of tone for mxr and Jim Dunlop pedals

I think I might have a guitar addiction problem........

That's a compliment coming from a guy who actually OWNS a guitar store.....

Since I haven't posted for awhile, figure I show you the last picture I snapped of my collection back in KL......



Let's see....
My favorite Epiphone Zakk Wylde Bullseye modified with EMG 81/85 ZW Pickups
My first Les Paul LP-100 with Chrome EMG 81 pickups
An Epiphone ZV with EMG 81TW and 89 coil tapped pickups, autographed by Zakk Wylde himself
Schecter Synyster Custom (soon to be upgraded with Sustaniac pickup)
Jackson RR3 (stock)
Ibanez Egen8 with DiMarzio Evolution pickups and a Gotoh Trem, autographed by Herman Li himself
Dean Dime Razorback 255
Epiphone Dot
Ibanez Acoustic
An a crappy old strat, which was my very first guitar

All of them modified with Dunlop Straplock system.

Not pictured are my Marshall JCM2000 TSL Combo
Vox VT15

And my pedals which are:

Jim Dunlop:
ZW-44 Overdrive
ZW-45 Wah
ZW-90 Phase
ZW-38 Chorus
M-169 Carbon Copy Delay

Digitech Whammy
Boss NS2 Noise supressor

Only took my Egen8 with me to Canada.

I miss my guitars.......

This post has been edited by blacktrix: May 21 2012, 03:24 AM